The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Lithium Mechanics: Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries
Open accessAbstract
The lack of a reliable rechargeable lithium metal (Li-metal) anode is a critical bottleneck for next-generation batteries. The unique mechanical properties of lithium influence the dynamic evolution of Li-metal anodes during cycling. While recent models have aimed at understanding the coupled electrochemical-mechanical behavior of Li-metal anodes, there is a lack of rigorous experimental data on the bulk mechanical properties of Li. This work provides comprehensive mechanical measurements of Li using a combination of digital-image correlation and tensile testing in inert gas environments. The deformation of Li was measured over a wide range of strain rates and temperatures, and it was fitted to a power-law creep model. Strain hardening was only observed at high strain rates and low temperatures, and creep was the dominant deformation mechanism over a wide range of battery-relevant conditions. To contextualize the role of creep on Li-metal anode behavior, examples are discussed for solid-state batteries, "dead" Li, and protective coatings on Li anodes. This work suggests new research directions and can be used to inform future electrochemical-mechanical models of Li-metal anodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Texture Analysis with MTEX – Free and Open Source Software Toolbox
Bachmann, F., Hielscher, R., & Schaeben, H. (2010) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.160.63 · Cited by 2,741
Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics
Frost, H. J., & Ashby, M. F. (1982) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,462
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes
Porz, L., Swamy, T., Sheldon, B. W., Rettenwander, D., Frömling, T., Thaman, H. L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701003 · Cited by 1,117
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Self-citationWood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Self-citationSharafi, A., Kazyak, E., Davis, A. L., Yu, S., Thompson, T., Siegel, D. J., Dasgupta, N. P., & Sakamoto, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03002 · Cited by 844
Self-citationElastic Properties of the Solid Electrolyte Li7La3Zr2O12(LLZO)
Yu, S., Schmidt, R. D., Garcia-Mendez, R., Herbert, E., Dudney, N. J., Wolfenstine, J. B., Sakamoto, J., & Siegel, D. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03854 · Cited by 662
All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production
Schnell, J., Günther, T., Knoche, T., Vieider, C., Köhler, L., Just, A., Keller, M., Passerini, S., & Reinhart, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.062 · Cited by 646
Wood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
Self-citationSharafi, A., Meyer, H. M., Nanda, J., Wolfenstine, J., & Sakamoto, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.053 · Cited by 536
Self-heating–induced healing of lithium dendrites
Li, L., Basu, S., Wang, Y., Chen, Z., Hundekar, P., Wang, B., Shi, J., Shi, Y., Narayanan, S., & Koratkar, N. (2018) · Science · doi:10.1126/science.aap8787 · Cited by 528
The Limits of Low-Temperature Performance of Li-Ion Cells
Huang, C. K., Sakamoto, J. S., Wolfenstine, J., & Surampudi, S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393622 · Cited by 401
Elastic, plastic, and creep mechanical properties of lithium metal
Masias, A. G., Felten, N., García-Méndez, R., et al. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2971-3 · Cited by 392
Kazyak, E., Wood, K. N., & Dasgupta, N. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02789 · Cited by 356
Self-citationLithium dendrite growth mechanisms in polymer electrolytes and prevention strategies
Barai, P., Higa, K., & Srinivasan, V. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03304d · Cited by 339
Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615733114 · Cited by 302
Strong texturing of lithium metal in batteries
Shi, F., Pei, A., Vailionis, A., Xie, J., Liu, B., Zhao, J., Gong, Y., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708224114 · Cited by 283
In Situ Measurements of Strains in Composite Battery Electrodes during Electrochemical Cycling
Jones, E. M. C., Silberstein, M. N., White, S. R., & Sottos, N. R. (2014) · Experimental Mechanics · doi:10.1007/s11340-014-9873-3 · Cited by 181
Taylor, N. J., Stangeland‐Molo, S., Haslam, C. G., Sharafi, A., Thompson, T., Wang, M. J., García-Méndez, R., & Sakamoto, J. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.055 · Cited by 156
Impact of External Pressure and Electrolyte Transport Properties on Lithium Dendrite Growth
Barai, P., Higa, K., & Srinivasan, V. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0651811jes · Cited by 124
Mesoscale Complexations in Lithium Electrodeposition
Hao, F., Verma, A., & Mukherjee, P. P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08796 · Cited by 96
Herbert, E. G., Hackney, S. A., Thole, V., Dudney, N. J., & Phani, P. S. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.84 · Cited by 77
New Foundations of Newman’s Theory for Solid Electrolytes: Thermodynamics and Transient Balances
Goyal, P., & Monroe, C. W. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0611711jes · Cited by 43
Effect of nanopatterning on mechanical properties of Lithium anode
Campbell, C. J., Lee, Y. M., Cho, K. Y., Lee, Y.-G., Lee, B., Phatak, C., & Hong, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-20773-8 · Cited by 42
Cited by
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Lithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Lu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Lithium metal anodes: Present and future
Wang, R., Cui, W., Chu, F., & Wu, F. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.12.024 · Cited by 544
Metadata
- Authors
- LePage, W. S., Chen, Y., Kazyak, E., Chen, K.-H., Sanchez, A. J., Poli, A., Arruda, E. M., Thouless, M. D., & Dasgupta, N. P.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2019
- Volume
- 166
- Issue
- 2
- Pages
- A89-A97
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2910842313
- Cited by
- 334
- References
- 29
- FWCI
- 14.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.