CoChat

A Parametric Open Circuit Voltage Model for Lithium Ion Batteries

Open access
Birkl, C. R., McTurk, E., Roberts, M. R., Bruce, P. G., Howey, D. A. · 2015 · Journal of The Electrochemical Society

The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.

Abstract

We present an open circuit voltage (OCV) model for lithium ion (Li-ion) cells, which can be parameterized by measurements of the OCV of positive and negative electrode half-cells and a full cell. No prior knowledge of physical parameters related to particular cell chemistries is required. The OCV of the full cell is calculated from two electrode sub-models, which are comprised of additive terms that represent the phase transitions of the active electrode materials. The model structure is flexible and can be applied to any Li-ion cell chemistry. The model can account for temperature dependence and voltage hysteresis of the OCV. Fitting the model to OCV data recorded from a Li-ion cell at 0°C, 10°C, 20°C, 30°C and 40°C yielded high accuracies with errors (RMS) of less than 5 mV. The model can be used to maintain the accuracy of dynamic Li-ion cell models in battery management systems by accounting for the effects of capacity fade on the OCV. Moreover, the model provides a means to separate the cell's OCV into its constituent electrode potentials, which allows the electrodes' capacities to be tracked separately over time, providing an insight into prevalent degradation mechanisms acting on the individual electrodes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1149/2.0331512jes

Cites

29 of 29 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY-NC-ND · From the PDF
Image 2
CC-BY-NC-ND · From the PDF
Image 3
CC-BY-NC-ND · From the PDF
Image 4
CC-BY-NC-ND · From the PDF
Figure 1 Coin cell assembly of the electrode half-cells.
Figure 1 Coin cell assembly of the electrode half-cells.CC-BY-NC-ND · From the PDF
Figure 2 Illustration of GITT recorded on a 740 mAh Kokam pouch cell at 40 ◦ C by incremental discharge ( △ Q = 74 mAh) and subsequent relaxation. a: Cell voltage (line) and OCV measurements (markers), recorded at the end of each relaxation period. b: Current applied for incremental discharge.
Figure 2 Illustration of GITT recorded on a 740 mAh Kokam pouch cell at 40 ◦ C by incremental discharge ( △ Q = 74 mAh) and subsequent relaxation. a: Cell voltage (line) and OCV measurements (markers), recorded at the end of each relaxation period. b: Current applied for incremental discharge.CC-BY-NC-ND · From the PDF
Figure 3 OCVasafunction of discharged capacity of PE (a) and NE (b) halfcells recorded at 40 ◦ C over 5 discharge/charge cycles. Incremental discharge of the electrodes corresponds to lithiation of the active materials.
Figure 3 OCVasafunction of discharged capacity of PE (a) and NE (b) halfcells recorded at 40 ◦ C over 5 discharge/charge cycles. Incremental discharge of the electrodes corresponds to lithiation of the active materials.CC-BY-NC-ND · From the PDF
Figure 4 a: Comparison of E OC ( x ) -E 0 computed by Equation 4 (solid line) and Equation 7 (broken line), respectively for various values of γ Ui e -1 . b (left axis, broken line): RMSE on E OC ( x ) from fitting Equation 7 to Equation 4. b (right axis, solid line): Correlation between parameter ai and γ Ui e -1 .
Figure 4 a: Comparison of E OC ( x ) -E 0 computed by Equation 4 (solid line) and Equation 7 (broken line), respectively for various values of γ Ui e -1 . b (left axis, broken line): RMSE on E OC ( x ) from fitting Equation 7 to Equation 4. b (right axis, solid line): Correlation between parameter ai and γ Ui e -1 .CC-BY-NC-ND · From the PDF
Image 9
CC-BY-NC-ND · From the PDF
Figure 6 OCV model schematic.
Figure 6 OCV model schematic.CC-BY-NC-ND · From the PDF
Figure 7 OCVrecorded during incremental charge (solid line) and discharge (broken line) of PE (a, b), NE (c, d) and full cell (e, f) at T = 0 ◦ C (a, c, e) and T = 40 ◦ C (b, d, f).
Figure 7 OCVrecorded during incremental charge (solid line) and discharge (broken line) of PE (a, b), NE (c, d) and full cell (e, f) at T = 0 ◦ C (a, c, e) and T = 40 ◦ C (b, d, f).CC-BY-NC-ND · From the PDF
Figure 8 Results of electrode capacity range fitting to determine ˆ x PE and ˆ x NE . The data were recorded using GITT at 30 ◦ C on a PE and NE half-cell and a 740 mAh commercial NMC cell during a) incremental charge and b) incremental discharge.
Figure 8 Results of electrode capacity range fitting to determine ˆ x PE and ˆ x NE . The data were recorded using GITT at 30 ◦ C on a PE and NE half-cell and a 740 mAh commercial NMC cell during a) incremental charge and b) incremental discharge.CC-BY-NC-ND · From the PDF
Figure 9 Results of electrode OCV fitting for a: PE and b: NE. Data were recorded using GITT at 20 ◦ C on a PE and NE half-cell cell, respectively, and averaged between incremental charge and discharge data. The SOC refers to the state of lithiation of the half-cells.
Figure 9 Results of electrode OCV fitting for a: PE and b: NE. Data were recorded using GITT at 20 ◦ C on a PE and NE half-cell cell, respectively, and averaged between incremental charge and discharge data. The SOC refers to the state of lithiation of the half-cells.CC-BY-NC-ND · From the PDF
Figure 10 Fitting results of cell and electrode OCV at 0 ◦ C: a) charge b) discharge, at 20 ◦ C: c) charge, d) discharge and 40 ◦ C: e) charge, f) discharge. OCV measurements were obtained by GITT with charge and discharge increments. One fresh 740 mAh NMC cell and one set of PE and NE half-cells were used for each temperature.
Figure 10 Fitting results of cell and electrode OCV at 0 ◦ C: a) charge b) discharge, at 20 ◦ C: c) charge, d) discharge and 40 ◦ C: e) charge, f) discharge. OCV measurements were obtained by GITT with charge and discharge increments. One fresh 740 mAh NMC cell and one set of PE and NE half-cells were used for each temperature.CC-BY-NC-ND · From the PDF
Figure 11 Residuals of OCV fits of the full cells, the PE half-cells and the NEhalf-cells for the combined parameter estimation at different temperatures.
Figure 11 Residuals of OCV fits of the full cells, the PE half-cells and the NEhalf-cells for the combined parameter estimation at different temperatures.CC-BY-NC-ND · From the PDF
Figure 12 Parameters E 0 , i , γ Ui e -1 and Delta1 xi of PE (top row) and NE (bottom row), plotted against temperature. Solid lines indicate parameters estimated for OCV recorded during incremental charge and broken lines during incremental discharge.
Figure 12 Parameters E 0 , i , γ Ui e -1 and Delta1 xi of PE (top row) and NE (bottom row), plotted against temperature. Solid lines indicate parameters estimated for OCV recorded during incremental charge and broken lines during incremental discharge.CC-BY-NC-ND · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 198

Metadata

Authors
Birkl, C. R., McTurk, E., Roberts, M. R., Bruce, P. G., & Howey, D. A.
Affiliations
University of Oxford (GB)
Venue
Journal of The Electrochemical Society
Published
2015
Volume
162
Issue
12
Pages
A2271-A2280
ISSN
  • 0013-4651 (ISSN-L)
  • 1945-7111
OpenAlex
W2226549587
Cited by
166
References
29
Citations by year
2026: 13 · 2025: 16 · 2024: 19 · 2023: 26 · 2022: 23 · 2021: 12 · 2020: 16 · 2019: 13 · 2018: 8 · 2017: 8 · 2016: 10 · 2015: 2
FWCI
9.63
Type
journal article
Language
en
Open access
Licence
cc-by-nc-nd
Locations
  • Journal of The Electrochemical Society (publishedVersion, cc-by-nc-nd)
  • St Andrews Research Repository (St Andrews Research Repository) (submittedVersion, cc-by-nc-nd)
Funders
  • Jaguar Land Rover
  • Engineering and Physical Sciences Research Council (EP/I029273/2, EP/I029273/1)
Topics
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
  • Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
Keywords
open-circuit voltage, lithium-ion batteries, temperature dependence, voltage hysteresis, capacity fade, battery management systems, battery degradation mechanisms, dynamic battery model

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.