CoChat

Durability of De-Alloyed Platinum-Nickel Cathode Catalyst in Low Platinum Loading Membrane-Electrode Assemblies Subjected to Accelerated Stress Tests

Open access
Ahluwalia, R. K., Wang, X., Peng, J-K, Kariuki, N. N., Myers, D. J., Rasouli, S., Ferreira, P. J., Yang, Z., Martinez-Bonastre, A., Fongalland, D., Sharman, J. · 2018 · Journal of The Electrochemical Society
Cited by 46

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

The durability of de-alloyed platinum-nickel catalysts supported on high-surface area carbon (d-PtNi/C) in optimized electrodes and membrane electrode assemblies (MEAs) under an accelerated stress test (AST) protocol is investigated with the objective of developing a quantitative understanding of the degradation mechanisms and their relationship to the electrode structure, pre-conditioning, and operating conditions. It is found that the cell degradation can be mitigated by controlling the voltage cycle, acid washing the MEA to remove Ni contaminants that enter the electrode and membrane during fabrication, and monitoring the operating conditions. For example, the electrochemical surface area (ECSA) loss is <25% after 30,000 triangle cycles with 0.925 V upper potential limit if the MEA is acid washed and extensive diagnostics are avoided. The parameters that exacerbate the cell degradation also accelerate the rate at which Ni leaches out from the catalyst. A mechanistic model is presented for the degradation in performance of d-PtNi/C electrodes. The model correlates a) the degradation in ORR mass and specific activities with ECSA and Ni losses, b) the decrease in limiting current density ( i L ), which is inversely proportional to the O 2 mass transport resistance, with the degradation in catalyst roughness factor, and c) the increase in mass transfer overpotentials with the reduced current density, i / i L .

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1149/2.0341806jes

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Research works printed but not linked: 33

  1. 10.1016/j.jpowsour.2011.01.059 · DOI
  2. 10.1016/j.apcatb.2004.06.021 · DOI · Paper page
  3. Thompsett D. , Pt Alloys as Oxygen Reduction Catalysts, in Handbook of Fuel Cells: Fundamentals, Technology and Applications, Vol. 3, Vielstich W. Lamm A. Gasteiger H. A. , Editors, John Wiley & Sons, Chichester, England (2003).
  4. 10.1021/jp055634c · DOI · Paper page
  5. 10.1021/jp908203p · DOI · Paper page
  6. 10.1039/c000822b · DOI · Paper page
  7. 10.1021/jp0776412 · DOI · Paper page
  8. Strasser P. , Dealloyed Pt Bimetallic Electrocatalysts for Oxygen Reduction, in Handbook of Fuel Cells: Fundamentals, Technology and Applications, Vol. 5, Vielstich W. Gasteiger H. A. Lamm A. Yokokawa H. , Editors, John Wiley & Sons, Chichester, England (2010).
  9. 10.1021/ja802513y · DOI · Paper page
  10. 10.1149/1.3210655 · DOI
  11. 10.1021/jp712025q · DOI · Paper page
  12. 10.1021/acscatal.5b02819 · DOI · Paper page
  13. 10.1149/1.3210654 · DOI
  14. 10.1016/j.jpowsour.2008.10.062 · DOI · Paper page
  15. 10.1149/2.1071412jes · DOI
  16. Myers D. Kariuki N. Ahluwalia R. Wang X. Peng J.-K. , Rationally Designed Catalyst Layers for PEMFC Performance Optimization, DOE Hydrogen and Fuel Cells Program, 2015 Annual Merit Review and Evaluation Meeting, Washington, D. C., June 8–12, 2015.
  17. 10.1021/acscatal.5b02750 · DOI
  18. 10.1149/2.018401jes · DOI
  19. 10.1039/C4EE02144D · DOI · Paper page
  20. Myers D. Kariuki N. Ahluwalia R. Wang X. Cetinbas C. F. Peng J.-K. , Rationally Designed Catalyst Layers for PEMFC Performance Optimization, 2016 DOE Hydrogen and Fuel Cells Program Review, Washington, D. C., June 6–10, 2016.
  21. Kongkanand A. Wagner F. , High-Activity Dealloyed Catalysts, 2014 DOE Hydrogen and Fuel Cells Program Review, Washington, D. C., June 16–20, 2014. · DOI
  22. 10.1021/jp306107t · DOI · Paper page
  23. 10.1007/s12678-014-0205-2 · DOI · Paper page
  24. 10.1107/S0021889809008802 · DOI · Paper page
  25. 10.1007/s11661-012-1431-y · DOI · Paper page
  26. 10.1107/S0021889809002222 · DOI · Paper page
  27. 10.1021/ja801138t · DOI
  28. 10.1016/j.electacta.2013.12.120 · DOI
  29. 10.1016/j.jpowsour.2017.01.058 · DOI
  30. 10.1149/2.0331606jes · DOI
  31. 10.1149/2.0051707jes · DOI
  32. 10.1149/1.3610986 · DOI
  33. 10.1021/acs.jpclett.6b00216 · DOI · Paper page

Cited by

See all 46

Metadata

Authors
Ahluwalia, R. K., Wang, X., Peng, J.-K., Kariuki, N. N., Myers, D. J., Rasouli, S., Ferreira, P. J., Yang, Z., Martinez-Bonastre, A., Fongalland, D., & Sharman, J.
Venue
Journal of The Electrochemical Society
Published
2018
Volume
165
Issue
6
Pages
F3316-F3327
ISSN
  • 0013-4651 (ISSN-L)
  • 1945-7111
OpenAlex
W2799788498
Cited by
46
References
6
FWCI
1.88
Type
journal article
Language
en
Open access
hybrid
Funders
United States Department of Energy (DE-AC02-06CH11357)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Durability of De-Alloyed Platinum-Nickel Cathode Catalyst in Low Platinum Loading Membrane-Electrode Assemblies Subjected to Accelerated Stress Tests. https://app.cochat.ai/papers/10.1149/2.0341806jes
The paper
Ahluwalia, R. K., Wang, X., Peng, J.-K., Kariuki, N. N., Myers, D. J., Rasouli, S., Ferreira, P. J., Yang, Z., Martinez-Bonastre, A., Fongalland, D., & Sharman, J. (2018). Durability of De-Alloyed Platinum-Nickel Cathode Catalyst in Low Platinum Loading Membrane-Electrode Assemblies Subjected to Accelerated Stress Tests. Journal of The Electrochemical Society. https://doi.org/10.1149/2.0341806jes

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.