The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Improvement of Cell Performance in Low-Pt-Loading PEFC Cathode Catalyst Layers Prepared by the Electrospray Method
Open accessAbstract
The reduction of Pt loading in cathode catalysts is an important subject for developing polymer electrolyte fuel cells. In order to solve this problem without sacrificing performance, we prepared a uniform catalyst-coated membrane (CCM) by an electrospray (ES) method with a low Pt loading, 0.05 mg Pt cm −2 , which is one-tenth of the typical cathode Pt loading. The ES process has several advantages for the fabrication of thin catalyst layers (CLs), such as smaller droplets and accurate position control, compared with the pulse-swirl-spray (PSS) method. Highly uniform CLs were evaluated by use of a standard evaluation cell (area 29.2 cm 2 ). The ES method makes it possible to control precisely the coating area and reduce the losses of the catalyst ink. CLs cross sections prepared by focused ion beam milling indicated that the total occupation fraction of the pores in the CLs prepared by the ES method was about twice as large as that for the PSS method. The ES method improved the ionomer coverage, led to increased electrochemically active surface area, and constructed more porous CLs. The highly porous CLs prepared by the ES method contributed to the improvement of the cell performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In addition to the composition and preparation process of the catalyst ink, the CL formation process, namely, depositing catalyst ink onto a substrate by ink coating techniques and then drying to form a CL, also regulates the morphology and structure of CL, e.g., thickness [162], uniformity [163], porosity [38,162], cracking [104], surface roughness [38], ionomer distribution [41]; thereby impact”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [162]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“To form a fine ink mist with well-defined droplets size, ultrasonic spray and electrospray were developed [104,162,163].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [162]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Compared to the CL deposited by the gas-assisted spray, the electrospray-coated CL is much more porous and has an increased ECSA value due to the fine ink droplets formed by the coulomb repulsion [162].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [162]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305
Electrospraying route to nanotechnology: An overview
Jaworek, A., & Sobczyk, A. T. (2008) · Journal of Electrostatics · doi:10.1016/j.elstat.2007.10.001 · Cited by 963
Instability of Electrified Liquid Surfaces
Zeleny, J. (1917) · Physical Review · doi:10.1103/physrev.10.1 · Cited by 944
Electrostatic spraying of liquids: Main functioning modes
Cloupeau, M., & Prunet-Foch, B. (1990) · Journal of Electrostatics · doi:10.1016/0304-3886(90)90025-q · Cited by 575
Advanced Platinum Alloy Electrocatalysts for the Oxygen Reduction Reaction
Wang, C., Markovic, N. M., & Stamenkovic, V. R. (2012) · ACS Catalysis · doi:10.1021/cs3000792 · Cited by 440
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Self-citationUchida, M., Fukuoka, Y., Sugawara, Y., Eda, N., & Ohta, A. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836988 · Cited by 309
Self-citationPorous metal materials for polymer electrolyte membrane fuel cells – A review
Yuan, W., Tang, Y., Yang, X., & Wan, Z. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.01.073 · Cited by 261
Antolini, E. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.08.007 · Cited by 220
Monodisperse Electrosprays of Low Electric Conductivity Liquids in the Cone-Jet Mode
Tang, K., & Gomez, A. (1996) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1996.0645 · Cited by 206
Status of hydrogen fuel cell electric buses worldwide
Hua, T., Ahluwalia, R., Eudy, L., Singer, G., Jermer, B., Asselin-Miller, N., Wessel, S., Patterson, T., & Marcinkoski, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.055 · Cited by 202
Lee, M., Uchida, M., Yano, H., Tryk, D. A., Uchida, H., & Watanabe, M. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.07.071 · Cited by 160
Self-citationShukla, S., Domican, K., Karan, K., Bhattacharjee, S., & Secanell, M. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.028 · Cited by 133
Uchida, M., Park, Y.-C., Kakinuma, K., Yano, H., Tryk, D. A., Kamino, T., Uchida, H., & Watanabe, M. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51801a · Cited by 122
Self-citationMartin, E. W., Shaheen, S., Lipman, T. E., & Lidicker, J. R. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.07.098 · Cited by 116
Offer, G. J., Contestabile, M., Howey, D. A., Clague, R., & Brandon, N. P. (2011) · Energy Policy · doi:10.1016/j.enpol.2011.01.006 · Cited by 110
Novel method for preparation of PEMFC electrodes by the electrospray technique
Benítez, R., Soler, J., & Daza, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.047 · Cited by 107
High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying
Martín, S., García‐Ybarra, P. L., & Castillo, J. L. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.07.069 · Cited by 99
Electrospray deposition of catalyst layers with ultra-low Pt loadings for PEM fuel cells cathodes
Martín, S., García‐Ybarra, P. L., & Castillo, J. L. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.092 · Cited by 95
PEMFC electrode preparation by electrospray: Optimization of catalyst load and ionomer content
Chaparro, A. M., Gallardo, B., Folgado, M. A., Martín, A. J., & Daza, L. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.12.003 · Cited by 80
Lee, M., Uchida, M., Tryk, D. A., Uchida, H., & Watanabe, M. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.072 · Cited by 72
Self-citationFabrication, In-Situ Performance, and Durability of Nanofiber Fuel Cell Electrodes
Brodt, M. W., Han, T., Dale, N. V., Niangar, E., Wycisk, R. J., & Pintauro, P. N. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0651501jes · Cited by 64
Martín, S., Martinez-Vazquez, B., García‐Ybarra, P. L., & Castillo, J. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.029 · Cited by 60
Fundamentals of Mass Spectrometry
Hiraoka, K. (2013) · Springer eBooks · doi:10.1007/978-1-4614-7233-9 · Cited by 59
Development of a polymer electrolyte membrane fuel cell stack for an underwater vehicle
Han, I., Kho, B.-K., & Cho, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.049 · Cited by 56
Martín, S., Perea, Á., García‐Ybarra, P. L., & Castillo, J. L. (2011) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2011.11.003 · Cited by 40
Corradini, P. G., Pires, F. I., Paganin, V. A., Perez, J., & Antolini, E. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1080-5 · Cited by 35
Scaling-up and characterization of ultralow-loading MEAs made-up by electrospray
Martinez-Vazquez, B., Sánchez, D. G., Castillo, J. L., Friedrich, K. A., & García‐Ybarra, P. L. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.01.111 · Cited by 25
A linear source of electrostatically charged spray
Wilson, J. (1982) · Journal of Agricultural Engineering Research · doi:10.1016/0021-8634(82)90074-9 · Cited by 19
Roles of Ag in fabricating Si nanowires by the electroless chemical etching technique
Wan, X., Wang, Q. K., Wangyang, P., & Tao, H. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-0784-x · Cited by 14
Hiraoka, K. (2013) · Springer eBooks · doi:10.1007/978-1-4614-7233-9_8 · Cited by 6
Cited by
Yan, X., Xu, Z., Yuan, S., Han, A., Shen, Y., Cheng, X., Liang, Y., Shen, S., & Zhang, J. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231523 · Cited by 131
Tran, D. T., Kshetri, T., Chuong, N. D., Gautam, J., Hoa, V. H., Le, H. T., Kim, N. H., & Lee, J. H. (2018) · Nano Today · doi:10.1016/j.nantod.2018.08.006 · Cited by 118
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Jiménez‐Morales, I., Haıdar, F., Cavaliere-Jaricot, S., Jones, D. J., & Rozière, J. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c02220 · Cited by 69
Cheng, X., Shen, S., Wei, G., Wang, C., Luo, L., & Zhang, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200228 · Cited by 63
Metadata
- Authors
- Takahashi, K., Kakinuma, K., & Uchida, M.
- Affiliations
- University of Yamanashi (JP)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2016
- Volume
- 163
- Issue
- 10
- Pages
- F1182-F1188
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2510340329
- Cited by
- 34
- References
- 33
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 5 · 2023: 2 · 2022: 4 · 2021: 3 · 2020: 6 · 2019: 3 · 2018: 4 · 2017: 4
- FWCI
- 1.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, cathode catalyst layer, low Pt loading, electrospray deposition, catalyst coated membranes, catalyst layer porosity, electrochemically active surface area, cell performance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.