CoChat

Improvement of Cell Performance in Low-Pt-Loading PEFC Cathode Catalyst Layers Prepared by the Electrospray Method

Open access
Takahashi, Kento, Kakinuma, Katsuyoshi, Uchida, Makoto · 2016 · Journal of The Electrochemical Society

The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.

Abstract

The reduction of Pt loading in cathode catalysts is an important subject for developing polymer electrolyte fuel cells. In order to solve this problem without sacrificing performance, we prepared a uniform catalyst-coated membrane (CCM) by an electrospray (ES) method with a low Pt loading, 0.05 mg Pt cm −2 , which is one-tenth of the typical cathode Pt loading. The ES process has several advantages for the fabrication of thin catalyst layers (CLs), such as smaller droplets and accurate position control, compared with the pulse-swirl-spray (PSS) method. Highly uniform CLs were evaluated by use of a standard evaluation cell (area 29.2 cm 2 ). The ES method makes it possible to control precisely the coating area and reduce the losses of the catalyst ink. CLs cross sections prepared by focused ion beam milling indicated that the total occupation fraction of the pores in the CLs prepared by the ES method was about twice as large as that for the PSS method. The ES method improved the ionomer coverage, led to increased electrochemically active surface area, and constructed more porous CLs. The highly porous CLs prepared by the ES method contributed to the improvement of the cell performance.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1149/2.0611610jes

Cites

33 of 33 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Figure 1 (a) Schematic drawing of electrospray (ES) process. (b) Steps of microparticle and nanoparticle production by ES.
Figure 1 (a) Schematic drawing of electrospray (ES) process. (b) Steps of microparticle and nanoparticle production by ES.CC-BY · From the PDF
Figure 2 (a) Mode changes of Taylor cone as a function of the nozzlesubstrate distance and the applied voltage (A: drip-mode, B: cone-jet mode and C: multi-jet mode). (b) Relationships between the applied voltage and the electric field for various nozzle-substrate distances.
Figure 2 (a) Mode changes of Taylor cone as a function of the nozzlesubstrate distance and the applied voltage (A: drip-mode, B: cone-jet mode and C: multi-jet mode). (b) Relationships between the applied voltage and the electric field for various nozzle-substrate distances.CC-BY · From the PDF
Figure 3 Photographs of CLs on the membrane prepared by PSS method (a) and by ES method (b). Photographic images of droplets on the membrane prepared by the PSS method (c) and by ES method (d). The white dotted-line squares indicate the geometric area of the electrodes (29.2 cm 2 ) in (a) and (b).
Figure 3 Photographs of CLs on the membrane prepared by PSS method (a) and by ES method (b). Photographic images of droplets on the membrane prepared by the PSS method (c) and by ES method (d). The white dotted-line squares indicate the geometric area of the electrodes (29.2 cm 2 ) in (a) and (b).CC-BY · From the PDF
Figure 4 SEM cross-sectional images of cathode CLs prepared by PSS method (a) and ES method (b), magnified images of the cathode CLs by PSS method (c) and ES method (d).
Figure 4 SEM cross-sectional images of cathode CLs prepared by PSS method (a) and ES method (b), magnified images of the cathode CLs by PSS method (c) and ES method (d).CC-BY · From the PDF
Figure 5 Relationship between cumulative pore volume and pore diameter of the carbon black.
Figure 5 Relationship between cumulative pore volume and pore diameter of the carbon black.CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Figure 8 IR -free polarization curves for the ES-cathode-cell and PSS-cathode-cell at 80 ◦ C, 80% RH, air/H2, ambient pressure.
Figure 8 IR -free polarization curves for the ES-cathode-cell and PSS-cathode-cell at 80 ◦ C, 80% RH, air/H2, ambient pressure.CC-BY · From the PDF
Figure 9 Humidity dependence of mass activity at 0.85 V ( IR -free), 80 ◦ C, air/H2, ambient pressure.
Figure 9 Humidity dependence of mass activity at 0.85 V ( IR -free), 80 ◦ C, air/H2, ambient pressure.CC-BY · From the PDF
Figure 10 Humidity dependence of the current density and the ohmic residence at 0.7 V ( IR -free), 80 ◦ C, air/H2, ambient pressure.
Figure 10 Humidity dependence of the current density and the ohmic residence at 0.7 V ( IR -free), 80 ◦ C, air/H2, ambient pressure.CC-BY · From the PDF
Figure 11 Relationships between the O2 gain and the current density under various humidity conditions, at 80 ◦ C, ambient pressure.
Figure 11 Relationships between the O2 gain and the current density under various humidity conditions, at 80 ◦ C, ambient pressure.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 33 references

Cited by

Metadata

Authors
Takahashi, K., Kakinuma, K., & Uchida, M.
Affiliations
University of Yamanashi (JP)
Venue
Journal of The Electrochemical Society
Published
2016
Volume
163
Issue
10
Pages
F1182-F1188
ISSN
  • 0013-4651 (ISSN-L)
  • 1945-7111
OpenAlex
W2510340329
Cited by
34
References
33
Citations by year
2026: 1 · 2025: 2 · 2024: 5 · 2023: 2 · 2022: 4 · 2021: 3 · 2020: 6 · 2019: 3 · 2018: 4 · 2017: 4
FWCI
1.69
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
Journal of The Electrochemical Society (publishedVersion, cc-by)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
proton exchange membrane fuel cells, cathode catalyst layer, low Pt loading, electrospray deposition, catalyst coated membranes, catalyst layer porosity, electrochemically active surface area, cell performance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.