Microstructural Analysis and Transport Resistances of Low-Platinum-Loaded PEFC Electrodes
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In this study, we present microstructural characterization for polymer electrolyte fuel cell (PEFC) cathodes with low platinum group metal (PGM) loadings together with polarization data analysis. Three-dimensional pore morphology and ionomer distribution are resolved using nano-scale X-ray computed tomography (nano-CT). Electrode structural properties are reported along with the effective ion and reactant transport properties. The characterization results are incorporated with two-dimensional multi-physics model that accounts for energy, charge, and mass transport along with the effect of liquid water flooding. Defining total mass transport resistance for the whole polarization curve, contributions of transport mechanisms are identified. Analysis of the experimental polarization curves at different operating pressures and temperatures indicates that the mass transport resistance in the cathode is dominated by the transport processes in the electrode. It is shown that flooding in the electrode is a major contributor to transport losses especially at elevated operating pressures while the pressure-independent resistance at the catalyst surface due to transport through the ionomer film plays a significant role, especially at low temperatures and low catalyst loading. In addition, by performing a parametric study for varying catalyst loadings, the importance of electrode roughness (i.e, electrochemically-active surface area/geometric electrode area) in determining the mass transport losses is highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Y.-J., Zhao, N., Fang, B., Li, H., Bi, X. T., & Wang, H. (2015) · Chemical Reviews · doi:10.1021/cr500519c · Cited by 1,267
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Modeling of Proton Exchange Membrane Fuel Cell Performance with an Empirical Equation
Kim, J., Lee, S., Srinivasan, S., & Chamberlin, C. E. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2050072 · Cited by 656
On gaseous self-diffusion in long capillary tubes
Pollard, W. G., & Present, R. D. (1948) · Physical Review · doi:10.1103/physrev.73.762 · Cited by 542
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Three-dimensional analysis of Nafion layers in fuel cell electrodes
Lopez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., & Gebel, G. (2014) · Nature Communications · doi:10.1038/ncomms6229 · Cited by 402
Cited by
Gas-Diffusion Electrodes for Carbon Dioxide Reduction: A New Paradigm
Higgins, D., Hahn, C., Xiang, C., Jaramillo, T. F., & Weber, A. Z. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02035 · Cited by 602
Development of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells
Mauger, S. A., Wang, M., Cetinbas, F. C., Dzara, M. J., Park, J., Myers, D. J., Ahluwalia, R. K., Pylypenko, S., Hu, L., Litster, S., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230039 · Cited by 84
Self-citationVan Cleve, T., Wang, G., Mooney, M., Cetinbas, C. F., Kariuki, N., Park, J., Farghaly, A., Myers, D., & Neyerlin, K. C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228889 · Cited by 66
Self-citationChowdhury, A., Bird, A., Liu, J., Zenyuk, I. V., Kusoglu, A., Radke, C. J., & Weber, A. Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07611 · Cited by 40
Metadata
- Authors
- Cetinbas, F. C., Wang, X., Ahluwalia, R. K., Kariuki, N. N., Winarski, R. P., Yang, Z., Sharman, J., & Myers, D. J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 14
- Pages
- F1596-F1607
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2773910255
- Cited by
- 49
- References
- 6
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.