CoChat

Optimization of Process Parameters with Minimum Thrust Force and Torque in Drilling Operation Using Taguchi Method

Open access
Neseli, Suleyman · 2014 · Advances in Mechanical Engineering

The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.

Abstract

This research outlines the Taguchi optimization methodology, which is applied to optimize cutting parameters in drilling of AISI 1040 steel. The drilling parameters evaluated are cutting speed, feed rate, and helix angle. Series of experiments are conducted to relate the cutting parameters on the thrust force and torque. L 27 (3 13 ) orthogonal array, signal-to-noise ratio is employed to analyze the influence of these parameters on thrust force and torque during drilling. Analysis of variance (ANOVA) is used to study the effect of process parameters on machining process. The study shows that the Taguchi method is suitable to solve the stated problem with the minimum number of trials. The main objective is to find the important factors and combination of factors that influence the machining process to achieve low thrust force and torque. The analysis of the Taguchi method indicates that the feed rate is the most significant factor affecting the thrust force, while the cutting speed contributes the most to the torque.

Overview

Integrity signals

Registry

Crossref · 10.1155/2014/925382

Cites

25 of 25 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 25 references

Research works printed but not linked: 1

  1. Roy R. K., 1990, A Primer of Taguchi Method

Cited by

See all 32

Metadata

Authors
Neseli, S.
Affiliations
Department of Mechanical Engineering, Faculty of Technology, Selçuk University, 42075 Konya, Turkey
Venue
Advances in Mechanical Engineering
Published
2014-01-01
Volume
6
Pages
925382
ISSN
  • 1687-8132 (ISSN-L)
  • 1687-8140
OpenAlex
W2020830032
Cited by
30
References
25
Citations by year
2026: 1 · 2025: 5 · 2024: 1 · 2023: 2 · 2022: 4 · 2021: 8 · 2020: 4 · 2019: 2 · 2018: 3
FWCI
0.00
Type
journal article
Language
en
Open access
Licence
  • cc-by
  • journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Locations
  • Advances in Mechanical Engineering (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Machining and Optimization Techniques
  • Social Sciences › Decision Sciences › Management Science and Operations Research › Optimal Experimental Design Methods
Keywords
drilling, AISI 1040 steel, thrust, torque, cutting parameters, cutting speed, feed rate, helix angle, Taguchi method, orthogonal arrays, signal-to-noise ratio, process parameter optimization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.