Bearing fault detection by one-dimensional convolutional neural networks
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Bearing faults are the biggest single source of motor failures. Artificial Neural Networks (ANNs) and other decision support systems are widely used for early detection of bearing faults. The typical decision support systems require feature extraction and classification as two distinct phases. Extracting fixed features each time may require a significant computational cost preventing their use in real‐time applications. Furthermore, the selected features for the classification phase may not represent the most optimal choice. In this paper, the use of 1D Convolutional Neural Networks (CNNs) is proposed for a fast and accurate bearing fault detection system. The feature extraction and classification phases of the bearing fault detection are combined into a single learning body with the implementation of 1D CNN. The raw vibration data (signal) is fed into the proposed system as input eliminating the need for running a separate feature extraction algorithm each time vibration data is analyzed for classification. Implementation of 1D CNNs results in more efficient systems in terms of computational complexity. The classification performance of the proposed system with real bearing data demonstrates that the reduced computational complexity is achieved without a compromise in fault detection accuracy.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Real-Time Patient-Specific ECG Classification by 1-D Convolutional Neural Networks
Kiranyaz, S., Ince, T., & Gabbouj, M. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2015.2468589 · Cited by 1,912 · cited 9×
“In this paper, an adaptive implementation of 1D Convolutional Neural Networks (CNNs) is proposed for bearing health monitoring.”
MethodInfluentialQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 1×
“The test setup consisting of four double row bearings on one shaft is depicted in Figure 5 [37].”
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Self-citationModel for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931
Vibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“Motor vibration analysis and motor current signature analysis (MCSA) are two commonly used noninvasive methods in bearing condition monitoring [3].”
MethodBin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Research works printed but not linked: 2
- 2012, STI Field Application Note, Rolling Element Bearings, REB
- Lee J., 2007, Rexnord Technical Services: Bearing Data Set
Cited by
Items 101–200 of 248
Simulation-Based Transfer Learning for Support Stiffness Identification
Bobylev, D., Choudhury, T., Miettinen, J., Viitala, R., Kurvinen, E., & Sopanen, J. (2021) · IEEE Access · doi:10.1109/access.2021.3108414 · Cited by 19
Xu, C., Wang, J., & Zhang, J. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122864 · Cited by 19
One-Dimensional Convolutional Neural Networks for Real-Time Damage Detection of Rotating Machinery
Avcı, O., Abdeljaber, O., Serkan Kiranyaz, B., Sassi, S., Ibrahim, A., & Gabbouj, M. (2021) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-030-76335-0_7 · Cited by 19
Chou, C.-B., & Lee, C. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3246495 · Cited by 18
“Furthermore, one-dimensional CNN (1D-CNN) is widely used for motor anomaly detection and in condition monitoring systems since 1D-CNN deals with these signals directly without any extra data preprocessing [25], [26].”
MethodResearch on Fault Diagnosis Technology Based on Deep Learning
Wang, H., Jian, W., & Li, P. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2187/1/012041 · Cited by 15
“Leren E directly processes the original signal in time domain using CNN processing one-dimensional data to achieve the fault diagnosis of vibration signal of motor bearing[20].”
MethodChen, H., Xu, H., & Yang, Z. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3212529 · Cited by 14
“This makes it difficult to use the operating conditions of deep learning models in real time or low-cost arrival time detection with small data volume [21], [22].”
BackgroundPeng, L., Huang, W., Du, G., Li, Y., Xu, Q., Zhou, K. Q., & Zhang, J. (2024) · Structural Health Monitoring · doi:10.1177/14759217241227995 · Cited by 14
ProbSparse Attention-Based Fault Diagnosis for Industrial Robots Under Different Working Conditions
Wang, Y., He, Y., Kang, B., Liu, J., & Sun, C. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3374323 · Cited by 19
“Eren et al. [21] used the diagnostic signals of the bearings after a simple normalization and directly input into a 1d-CNN network for fault diagnosis.”
MethodMao, Y., Li, H., Xu, Y., Wang, S., Yin, X., Fan, K., Ding, Z., & Wang, Y. (2024) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.13756 · Cited by 14
Roller Bearing Failure Analysis using Gaussian Mixture Models and Convolutional Neural Networks
Rathore, M. S., & Harsha, S. P. (2022) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-022-01469-8 · Cited by 14
Dang, Z., Lv, Y., Li, Y., & Wei, G. (2019) · Shock and Vibration · doi:10.1155/2019/3262818 · Cited by 15
“Traditional feature extraction methods are performed on the basis of time domain characteristics [63, 72], frequency domain characteristics [64, 67, 70], time and frequency domain characteristics [62, 66], and mode characteristics [10, 61, 65, 66, 73].”
MethodWang, Y., Han, M., & Liu, W. (2019) · International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering · doi:10.1109/qr2mse46217.2019.9021126 · Cited by 14
“Eren [8] proposed one-dimensional CNN for bearing fault diagnosis systems.”
BackgroundRolling Bearing Fault Diagnosis Based on 2D CNN and Hybrid Kernel Fuzzy SVM
Zhang, Q., & Ju, Z. (2025) · Advanced Theory and Simulations · doi:10.1002/adts.202400793 · Cited by 17
Liu, K., Mao, W., Shi, H., & Liang, X. (2021) · IEEE Access · doi:10.1109/access.2021.3132353 · Cited by 13
Research on Fault Diagnosis Method Based on Improved CNN
Hao, H., Feng, F., Zhu, J., Xun, Z., Jiang, P., Feng, J., Jun, X., Yazhi, L., & Guanghui, S. (2022) · Shock and Vibration · doi:10.1155/2022/9312905 · Cited by 13
“Eren [15] proposed a one-dimensional convolutional neural network (1D-CNN) for a fast and accurate bearing fault detection system.”
BackgroundYıldırım, A., & Serkan Kiranyaz, B. (2020) · IEEE Access · doi:10.1109/access.2020.3027472 · Cited by 15
Shen, Z., Kong, X., Cheng, L., Wang, R., & Zhu, Y. (2024) · Sensors · doi:10.3390/s24041290 · Cited by 14
“Eren et al. [10] used one-dimensional CNN and raw vibration signals for bearing fault diagnosis.”
BackgroundWang, Z., Zeng, Q., & Haralambides, H. E. (2024) · Ocean & Coastal Management · doi:10.1016/j.ocecoaman.2024.107408 · Cited by 14
Aduwenye, P., Nutakor, C., Roininen, L., & Sopanen, J. (2025) · IEEE Access · doi:10.1109/access.2025.3548549 · Cited by 16
“Several studies, including those by Eren et al. [32], Wang et al. [33], Jin et al. [34], He et al. [35] and Chen et al. [36] show that CNNs have also demonstrated impressive results in 1D as well.”
Deep Learning-Based Bearing Fault Detection Using 2-D Illustration of Time Sequence
Neupane, D., & Seok, J. (2020) · International Conference on Information and Communication Technology Convergence (ICTC) · doi:10.1109/ictc49870.2020.9289232 · Cited by 14
“D CNN model in [23], which provided 97.1% accuracy.”
MethodInfluentialA weighted wrapper approach to feature selection
Kusy, M., & Zajdel, R. (2021) · International Journal of Applied Mathematics and Computer Science · doi:10.34768/amcs-2021-0047 · Cited by 13
“1D–CNNs have become the state-of-the-art application tools in engineering fields such as automatic speech recognition (Abdel-Hamid et al ., 2014b), electrocardiogram monitoring (Kiranyaz et al ., 2015b) or bearing fault detection (Eren, 2017).”
BackgroundKunwar, A., Malla, P. B., Sun, J., Qu, L., & Ma, H. (2021) · Solar Energy · doi:10.1016/j.solener.2021.06.006 · Cited by 13
Senanayaka, A., Lee, P., Lee, N., Dickerson, C., Netchaev, A. D., & Mun, S. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14080-y · Cited by 11
“It has been shown to offer better accuracy than other methods and has also helped improve decision-making [59, 60].”
Barusu, M. R., & Deivasigamani, M. (2020) · IETE Journal of Research · doi:10.1080/03772063.2020.1816223 · Cited by 11
Stamping Tool Conditions Diagnosis: A Deep Metric Learning Approach
Dzulfikri, Z., Su, P.-W., & Huang, C.-Y. (2021) · Applied Sciences · doi:10.3390/app11156959 · Cited by 13
Yadav, A., Rajagopalan, S., Purohit, A., & Singh, J. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00578-w · Cited by 13
“Some of the common causes of failures in these machines can be attributed to rotor faults (such as misalignment, bend, bow, crack), gear faults, motor winding faults, and bearing faults [9–11].”
BackgroundA remaining useful life prediction method based on PSR-former
Zhang, H., Zhang, S., Qiu, L., Zhang, Y., Wang, Y., Wang, Z., & Yang, G. (2022) · Scientific Reports · doi:10.1038/s41598-022-22941-3 · Cited by 13
Rolling bearing intelligent fault diagnosis method based on IPSO-WCNN
Chen, R., Gu, Y., Wu, K., & Li, C. (2022) · Measurement and Control · doi:10.1177/00202940221092109 · Cited by 11
“Researchers constructed new CNNs to meet the structure of the original signals and solve the first problem of CNN. Eren 18 proposed a one-dimensional CNN detection system for motor bearing with better detection accuracy.”
BackgroundSun, L., Fan, X., Huang, S., Luo, S., Zhao, L., Chen, X., He, Y., & Suo, X. (2021) · Journal of Sensors · doi:10.1155/2021/8857931 · Cited by 11
“Levent proposed an adaptive implementation of 1D-CNN for bearing health monitoring and demonstrated that the reduced computational complexity is achieved without a compromise in fault detection accuracy [16].”
BackgroundKim, D. W., Lee, E. S., Jang, W. K., Kim, B. H., & Seo, Y. H. (2022) · Advances in Mechanical Engineering · doi:10.1177/16878132221078494 · Cited by 12
“13 The frequency of a single-point fault in a ball bearing depends on the bearing geometry and rotational speed.”
BackgroundHybrid fault diagnostics and prognostics system development for motor bearings health monitoring
Abbasi, M. A., Huang, S., & Khan, A. S. (2024) · Quality Engineering · doi:10.1080/08982112.2024.2385920 · Cited by 10
“These techniques include a one-dimensional CNN (Eren 2017) specifically designed for bearing fault diagnosis using raw vibration data, the Hierarchical Convolutional Neural Network (HCNN) Lu, Wang, and Zhou (2017) that divides the vibration signal into time sub-series and utilizes a matrix…”
Huh, J., Van, H. P., Han, S., Choi, H., & Choi, S.-K. (2019) · Sensors · doi:10.3390/s19051055 · Cited by 10
Liu, Y., Li, K., Zhang, Y., & Song, S. (2019) · IEEE Access · doi:10.1109/access.2019.2947536 · Cited by 11
“For example, Eren advanced a bearing fault detection method using 1D-CNNs [16], Ronao and Cho utilized deep 1D-CNNs for a human activity recognition task [5], Dan et al.”
MethodWDBM: Weighted Deep Forest Model Based Bearing Fault Diagnosis Method
Gao, L., Wang, X., Wang, T., & Chang, M. (2022) · Computers, materials & continua/Computers, materials & continua (Print) · doi:10.32604/cmc.2022.027204 · Cited by 10
Barusu, M. R., Umamaheswari, S., & Meganathan, D. (2019) · Elektronika ir Elektrotechnika · doi:10.5755/j01.eie.25.1.22735 · Cited by 10
Fault diagnosis of rolling element bearings using artificial neural network
Laribi, S. S., Bendiabdellah, A., & Meradi, S. (2020) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijece.v10i5.pp5288-5295 · Cited by 9
Mechanical Fault Diagnosis Methods Based on Convolutional Neural Network: a Review
Zhang, T., & Dai, J. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1750/1/012048 · Cited by 10
“…capabilities, scholars began to introduce it into the field of mechanical fault diagnosis, which can well characterize the complex mapping relationship between signals and mechanical health, and improve Diversity, non-linearity, high ability to diagnose and analyze health monitoring data [18-21].”
BackgroundHendriks, J., & Dumond, P. (2021) · Vibration · doi:10.3390/vibration4020019 · Cited by 9
“Raw vibration signals have been used in 1D CNNs with and without low-pass filters and downsampling to diagnose faults in bearings [7,8] and gearboxes [9,10].”
MethodBoztaş, G. (2023) · Transactions of the Institute of Measurement and Control · doi:10.1177/01423312231171664 · Cited by 10
“DL algorithms such as convolutional neural network (CNN) has been used for bearing fault detection (Eren, 2017), Auto Encoder (AE) has also been preferred for fault diagnosis of rolling bearings (Liu et al.”
MethodIn CNC: Cutting Tool Health Monitoring Using Convolutional Neural Networks
Pondkule, S. M., & Bhosle, S. M. (2025) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-025-01848-z · Cited by 8
Artificial Intelligence for Fault Detection of Automotive Electric Motors
Soresini, F., Barri, D., Cazzaniga, I., Ballo, F. M., Mastinu, G. R. M., & Gobbi, M. (2025) · Machines · doi:10.3390/machines13060457 · Cited by 17
Zhang, L., & Tao, J. (2018) · Algorithms · doi:10.3390/a11020021 · Cited by 8
“[18] proposed a one-dimensional convolutional neural network for fault monitoring system of bearings, which reduced the computational complexity while having higher detection accuracy.”
BackgroundTayyab, S. M., Chatterton, S., & Pennacchi, P. (2022) · Machines · doi:10.3390/machines10100908 · Cited by 8
Trajectory-based fish event classification through pre-training with diffusion models
Canovi, N., Ellis, B. A., Sørdalen, T. K., Allken, V., Halvorsen, K. T., Malde, K., & Beyan, C. (2024) · Ecological Informatics · doi:10.1016/j.ecoinf.2024.102733 · Cited by 10
“…for action / event recognition (Cho and Yoon, 2018; Escott ´ a et al., 2022; Hosseini et al., 2020; Javidani and Mahmoudi-Aznaveh, 2022; Trelinski and Kwolek, 2021) and imbalanced data classification (Alex et al., 2024; Eren, 2017; Mattioli et al., 2022; Qazi et al., 2022; Sujatha et al., 2023).”
BackgroundXu, Y., Wang, H., Xu, F., Bi, S., & Ye, J. (2025) · Processes · doi:10.3390/pr13041200 · Cited by 8
Fault Detection for Lubricant Bearing with CNN
Oh, J. W., Park, D., & Jeong, J. (2019) · Intelligent Autonomous Systems · doi:10.1109/icoias.2019.00031 · Cited by 8
“Eren used a 1-D CNN to diagnose bearing faults using the raw signal directly in the time domain [13].”
MethodAn Antinoise Fault Diagnosis Method Based on Multiscale 1DCNN
Cao, J., He, Z., Wang, J., & Yu, P. (2020) · Shock and Vibration · doi:10.1155/2020/8819313 · Cited by 14
“Eren [9] used a one-dimensional convolutional neural network to quickly and accurately detect motor bearing faults, with an accuracy rate of 97.”
Ileri, U., Altun, Y., & Narin, A. (2024) · Applied Sciences · doi:10.3390/app14114899 · Cited by 11
Huang, W., Peng, L., Zheng, Z., Zhang, J., Chen, X., Zhou, B., Zhou, K., & Zhang, Z. (2025) · Measurement · doi:10.1016/j.measurement.2025.116755 · Cited by 7
Wardhana, I., Gouiaa-Mtibaa, A., Vrignat, P., & Kratz, F. (2025) · Computers in Industry · doi:10.1016/j.compind.2025.104254 · Cited by 9
Xu, X., Li, Z., Zhao, Y., & Qian, W. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acfdc1 · Cited by 10
“A one-dimensional CNN model was used by Eren [25]. for bearing fault detection in system malfunction diagnosis, with raw vibration data employed as input.”
Asalapuram, V., Khan, I., & Rao, K. P. (2019) · International Symposium on Measurement and Control in Robotics (ISMCR) · doi:10.1109/ismcr47492.2019.8955729 · Cited by 8
“His results indicate that a shallow CNN can achieve high detection rates, and the bearing fault detection exceeds performance offered by traditional classifiers like Multi-Layer Perceptron, Radial Basis Function Networks and Support Vector Machines [6].”
BackgroundA Novel Bearing Fault Diagnosis of Raw Signals Based on 1D Residual Convolution Neural Network
Li, C., Yu, L., Zhang, A., He, Q., Yang, W., & Duan, Z. (2020) · International Conference on High Performance Big Data and Intelligent Systems (HPBD&IS) · doi:10.1109/hpbdis49115.2020.9130567 · Cited by 7
“Inspired by these, recent studies have applied 1D CNN in bearing fault diagnosis based on time-series sensor data [22]-[23][24].”
MethodBearing Fault Identification Based on Deep Convolution Residual Network
Zhou, T., Li, Y., Yijia, J. I. N. G., & Tong, Y. (2021) · Mechanika · doi:10.5755/j02.mech.28265 · Cited by 7
Failure Mode Detection and Validation of a Shaft-Bearing System with Common Sensors
Kuo, C., Chuang, Y.-F., & Liang, S.-H. (2022) · Sensors · doi:10.3390/s22166167 · Cited by 7
Kumar, P., Hati, A. S., & Kumar, P. (2023) · International Journal of Adaptive Control and Signal Processing · doi:10.1002/acs.3643 · Cited by 7
Motor Fault Diagnosis of a Brushless DC Motor Using Fast Kurtogram on Convolutional Neural Network
Flores, J. A., & Ostia, C. F. (2023) · International Conference on Control, Automation and Robotics (ICCAR) · doi:10.1109/iccar57134.2023.10151730 · Cited by 6
“Eren [8] The scope of the study used recorded data voltage signals from the works of Borja et.al 4] which used a BLDC motor with the following specification: voltage rating at 24 V, rated current at 20 A, rated speed at 3020 RPM, and rated power at 420 W. and able to conduct diagnostic simulation…”
MethodBai, H., Tong, W., Geng, Z., & Gao, C. (2025) · PLoS ONE · doi:10.1371/journal.pone.0327206 · Cited by 12
“Eren et al. [18] proposed a one-dimensional CNN-based model that effectively integrates feature extraction and classification.”
Ping, M., Cen, Y., & Tang, L. (2025) · Applied Mathematical Modelling · doi:10.1016/j.apm.2025.116390 · Cited by 6
Xiao, X., He, Y., Su, J., & Hu, K. (2026) · Applied Sciences · doi:10.3390/app16031407 · Cited by 8
Yang, X., Xu, X., Wang, Y., Liu, S., Bai, X., Jing, L., Ma, J., & Huang, J. (2024) · Applied Sciences · doi:10.3390/app14114785 · Cited by 8
Accompanying deep framework for faults in motor and gearbox with disproportion vibrational samples
Karamti, H., Lashin, M. M. A., Alrowais, F., & Mahmoud, A. M. (2022) · Neural Computing and Applications · doi:10.1007/s00521-022-08020-8 · Cited by 6
“Therefore, suitable representation of data certainly reduces the number of parameters to be trained and quicken network convergence [24, 25].”
BackgroundLi, K., Wang, C., & Wu, H. (2023) · Research Square · doi:10.21203/rs.3.rs-3258385/v1 · Cited by 6
Dong, W., Zhang, Y., Xu, L., Jia, D., Shan, Z., Cui, N., Gao, C., Liu, Y., & Ma, H. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.113371 · Cited by 6
Li, Q., Zhou, R., Zhai, X., Wang, J., & Lv, Q. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.113716 · Cited by 5
Edge-based intelligent fault diagnosis for centrifugal pumps in microbreweries
Dias, A. L., Buzoli, M. R., da Silva, V. R., da Silva, J. C. R., Turcato, A. C., & Sestito, G. S. (2024) · Flow Measurement and Instrumentation · doi:10.1016/j.flowmeasinst.2024.102730 · Cited by 5
Using vibration data to classify conditions in disk stack separators
Merkelbach, S., Afroze, L., Janssen, N., von Enzberg, S., Kühn, A., & Dumitrescu, R. (2022) · Vibroengineering PROCEDIA · doi:10.21595/vp.2022.23000 · Cited by 5
“Therefore, we chose seven popular ML algorithms which are NB [7], LR [8], KNN [2], [5], SVM [7], [9], RF [8], 1DCNN [10], NN [3], [9].”
MethodA Comparative Study of Rolling Bearing Fault Classification Using CWT-CNN and STFT-CNN Methods
Joseph, T., Krishnan, K. K., & Sudeep, U. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-9264-5_11 · Cited by 7
Makarov, R., Qaid, M. R. T. M., Alhussein, A. N. D., Valeev, B. I., Agliullin, T. A., Anfinogentov, V., & Sakhabutdinov, A. (2024) · Optics · doi:10.3390/opt5020016 · Cited by 6
“Artificial neural networks are also used as a control tool [22] and in signal processing devices [23,24].”
MethodSemi-supervised Bearing Fault Diagnosis with Adversarially-Trained Phase-Consistent Network
Yi, J., & Park, J. (2021) · ACM SIGKDD Conference on Knowledge Discovery and Data Mining (KDD) · doi:10.1145/3447548.3467200 · Cited by 5
“[5, 11, 24, 33] used raw signals directly as inputs for the 1-d CNN layers without preprocessing.”
MethodSong, M., Zhang, Z., Xiao, S., Xiong, Z., & Li, M. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac9078 · Cited by 6
“The results prove that in the benchmark model of transfer learning, the accuracy of STN is better than CNN, RNN, LSTM, DNN and the results of models proposed in [31].”
Classification of Bearing Fault Using Radial Basis Neural Network and Genetic Algorithm
Istiaque, A., & Islam, M. S. (2020) · International Conference on Advanced Information and Communication Technology (ICAICT) · doi:10.1109/icaict51780.2020.9333527 · Cited by 5
An Anti-Noise Fault Diagnosis Method of Bearing based on Multi-Scale 1DCNNPreprint
Cao, J., He, Z., Wang, J., & Yu, P. (2020) · Preprints.org · doi:10.20944/preprints202008.0164.v1 · Cited by 5
“Levent Eren [9] uses a one-dimensional convolutional neural network to quickly and 46 Preprints (www.”
MethodSymmetric Positive Definite manifold deep metric learning for bearing fault diagnosis
Cheng, J., Ran, R., Fang, B., & Li, B. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2026.113821 · Cited by 5
Davoodabadi, A., Behzad, M., Arghand, H. A., Mohammadi, S., & Gelman, L. (2025) · Machines · doi:10.3390/machines13050351 · Cited by 5
Partial Domain Fault Diagnosis of Bearings under Cross-Speed Conditions Based on 1D-CNN
Chen, Y., Xiao, L., & Li, Z. (2022) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-yantai55411.2022.9941891 · Cited by 6
A novel bearing fault detection approach using a convolutional neural network
Aydın, T., Erdem, E., Erkayman, B., Kocadağistan, M. E., & Teker, T. (2024) · Materials Testing · doi:10.1515/mt-2023-0334 · Cited by 4
Dynamic behavior of large faults toward severity estimation in bearings
Madar, E., Sol, A., Klein, R., & Bortman, J. (2024) · Structural Health Monitoring · doi:10.1177/14759217231226119 · Cited by 4
Motor Condition Monitoring by Empirical Wavelet Transform
Eren, L., Çekiç, Y., & Devaney, M. J. (2018) · European Signal Processing Conference (EUSIPCO) · doi:10.23919/eusipco.2018.8553566 · Cited by 4
“Then, the reconstructed signal can be fed to an adaptive 1D Convolutional Neural Network (CNN) classifier for feature extraction and more accurate pattern recognition with a simple structure [22-23].”
MethodSelf-citationTimeGPT for Mechanical System Degradation Assessment: A Large Time Series Model Approach
Qi, J., Chen, Z., Chen, P., Kong, Y., Qin, Y., & Li, W. (2026) · Chinese Journal of Mechanical Engineering · doi:10.1016/j.cjme.2026.100326 · Cited by 5
Liu, X., Zha, W., Li, D., Xiang, L., & Shen, L. (2022) · Journal of Energy Resources Technology · doi:10.1115/1.4055395 · Cited by 4
Application of Convolutional Neural Network to Defect Diagnosis of Drill Bits
Yu, Y., Liu, Q., Han, B. S., & Zhou, W. (2022) · Applied Sciences · doi:10.3390/app122110799 · Cited by 3
Patel, D., & Manickam, R. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-6176-0_14 · Cited by 3
Automatic classification of EEG signals via deep learning
Wu, T., Kong, X., Wang, Y., Yang, X., Liu, J., & Qi, J. (2021) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin45523.2021.9557473 · Cited by 5
How Artificial Intelligence Can Enhance Predictive Maintenance in Smart Factories
Pérez-Juárez, M. A., Aguiar-Pérez, J. M., Del-Pozo-Velázquez, J., Alonso-Felipe, M., Rozada-Raneros, S., & Barrio-Conde, M. (2022) · Advances in logistics, operations, and management science book series · doi:10.4018/978-1-7998-9201-4.ch004 · Cited by 4
Deep Learning for Multivariate Prediction of Building Energy Performance of Residential Buildings
Aliyu, I., Um, T., Lee, S.-J., Lim, C. G., & Kim, J. (2023) · Computers, materials & continua/Computers, materials & continua (Print) · doi:10.32604/cmc.2023.037202 · Cited by 6
Särestöniemi, M., Taparugssanagorn, A., Iinatti, J., & Myllylä, T. (2024) · Communications in computer and information science · doi:10.1007/978-3-031-59091-7_28 · Cited by 3
Diagnostics and prognostics system design integrating hybrid Siamese and model-driven learning
Abbasi, M. A., Huang, S., & Khan, A. S. (2024) · Transactions of the Institute of Measurement and Control · doi:10.1177/01423312241292756 · Cited by 3
“The evaluation includes (Eren, 2017) designed 1D-CNN for bearing failure detection using historical vibration signals, as well as the hierarchical convex neural network (HCNN) (Lu et al., 2017) that splits the vibration data into time sequences by interleaved continuous sampling and uses the matrix…”
Abdisa, W. T., & Harb, H. (2019) · International Journal of Intelligent Systems and Applications · doi:10.5815/ijisa.2019.10.01 · Cited by 3
Fault Diagnosis and Noise Robustness Comparison of Rotating Machinery using CWT and CNN
Kim, B.-W., & Lee, J. (2021) · Advances in Science Technology and Engineering Systems Journal · doi:10.25046/aj0601146 · Cited by 3
Sensor Validation for Indoor Air Quality using Machine Learning
Seibert, V. A., Araújo, R., & McElligott, R. (2020) · doi:10.5753/eniac.2020.12174 · Cited by 3
“Nonetheless, future work includes fine-tuning the models to the problem, along with testing other more complex models, such as deep neural networks (e.g. [Eren 2017]).”
BackgroundMethodHoang, D.-T., & Kang, H. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-26766-7_26 · Cited by 3
Optimization Methods in Fault Detection and Diagnosis
Kulkarni, A. J. (2025) · Springer eBooks · doi:10.1007/978-981-96-5257-0_6 · Cited by 4
Iqbal, K. I. M., DeVitis, J., Sjoblom, K. J., Haas, C. N., & Bartoli, I. (2025) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-025-01236-3 · Cited by 2
“In contrast, data likeECGsignals,rawvibrationaldata,bearingfaultdetection sensor data, and voltage/current data from specialized power electronics are typically 1-dimensional and remain so even after performing some signal processing tasks [1, 2, 8, 30, 31, 39, 43–46].”
Kilickaya, S., & Eren, L. (2025) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-025-02129-5 · Cited by 5
“1D CNNs achieved state-of-the-art performance in various applications, including biomedical data classification [23], structural health monitoring [1], and motor fault diagnosis [5, 7, 8, 13, 45].”
Self-citationResearch progress on bearing fault diagnosis with deep learning methods for rolling element bearings
Patel, S., & Patel, S. (2025) · Noise & Vibration Worldwide · doi:10.1177/09574565251382130 · Cited by 2
“Eren et al. 31 propose a quick and precise bearing fl aw recognition method using 1D Convolutional Neural Networks (CNNs).”
Lin, L., Xu, Y., Zhang, C., & Sun, L. (2026) · Journal of Computational Science · doi:10.1016/j.jocs.2026.102819 · Cited by 2
Application of Long Short-Term Memory for Faults Identification in 3-Phase Induction Motor
Hossain, M. M., & Kolla, S. R. (2020) · IJIREEICE · doi:10.17148/ijireeice.2020.8901 · Cited by 2
Taparugssanagorn, A., Särestöniemi, M., Iinatti, J., & Myllylä, T. (2024) · International Symposium on Medical Information and Communication Technology · doi:10.1109/ismict61996.2024.10738181 · Cited by 2
“The SVM with a RBF kernel emerges as a robust model tailored specifically for binary classification tasks, aligning seamlessly with our goal of distinguishing between normal and tumor tissue [11-13].”
MethodInfluentialHuang, W., Zhou, K., Zhang, J., Peng, L., Du, G., & Zheng, Z. (2025) · Structural Control and Health Monitoring · doi:10.1155/stc/7386022 · Cited by 2
Metadata
- Authors
- Eren, L.
- Affiliations
- İzmir University of Economics (TR)
- Corresponding author
- Eren, Levent
- ORCID
- Eren, Levent
- Venue
- Mathematical Problems in Engineering
- Publisher
- Wiley
- Published
- 2017-01
- Volume
- 2017
- Issue
- 1
- ISSN
- 1024-123X (ISSN-L)
- 1563-5147
- OpenAlex
- W2737404945
- Cited by
- 250
- References
- 36
- Citations by year
- 2026: 12 · 2025: 31 · 2024: 38 · 2023: 23 · 2022: 40 · 2021: 41 · 2020: 35 · 2019: 22 · 2018: 8
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Mathematical Problems in Engineering (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- bearing fault detection, 1D convolutional neural network, vibration signal analysis, end-to-end feature extraction, computational complexity reduction, real-time fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.