Bearing fault detection by one-dimensional convolutional neural networks
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Bearing faults are the biggest single source of motor failures. Artificial Neural Networks (ANNs) and other decision support systems are widely used for early detection of bearing faults. The typical decision support systems require feature extraction and classification as two distinct phases. Extracting fixed features each time may require a significant computational cost preventing their use in real‐time applications. Furthermore, the selected features for the classification phase may not represent the most optimal choice. In this paper, the use of 1D Convolutional Neural Networks (CNNs) is proposed for a fast and accurate bearing fault detection system. The feature extraction and classification phases of the bearing fault detection are combined into a single learning body with the implementation of 1D CNN. The raw vibration data (signal) is fed into the proposed system as input eliminating the need for running a separate feature extraction algorithm each time vibration data is analyzed for classification. Implementation of 1D CNNs results in more efficient systems in terms of computational complexity. The classification performance of the proposed system with real bearing data demonstrates that the reduced computational complexity is achieved without a compromise in fault detection accuracy.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Real-Time Patient-Specific ECG Classification by 1-D Convolutional Neural Networks
Kiranyaz, S., Ince, T., & Gabbouj, M. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2015.2468589 · Cited by 1,912 · cited 9×
“In this paper, an adaptive implementation of 1D Convolutional Neural Networks (CNNs) is proposed for bearing health monitoring.”
MethodInfluentialQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 1×
“The test setup consisting of four double row bearings on one shaft is depicted in Figure 5 [37].”
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Self-citationModel for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931
Vibration‐based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Wiley eBooks · doi:10.1002/9780470977668 · Cited by 868
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
Motor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartfield, R. G. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475697 · Cited by 761
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“Motor vibration analysis and motor current signature analysis (MCSA) are two commonly used noninvasive methods in bearing condition monitoring [3].”
MethodBin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Research works printed but not linked: 2
- 2012, STI Field Application Note, Rolling Element Bearings, REB
- Lee J., 2007, Rexnord Technical Services: Bearing Data Set
Cited by
Items 201–248 of 248
Zhang, M., Li, X. J., Xu, S. H., & Meng, X. Y. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac60d4 · Cited by 2
“Eren et al [18] directly used the original rolling bearing vibration data to diagnose faults via 1-CNN. Wu et al [19] developed an improved 1-CNN that learns features from the raw time signals.”
Fault diagnosis method of rotating machinery based on MSResNet feature fusion and CAM
Du, L. (2024) · Journal of Vibroengineering · doi:10.21595/jve.2024.24157 · Cited by 2
“In the field of fault, the collected one-dimensional vibration signal is usually used as the input of CNN. Eren [9] successfully applied this one-dimensional vibration signal to 1 DCNN to diagnose rolling bearings.”
MethodFault Diagnosis Method of Rolling Bearing Based on MSCNN-CAM
Wang, H., Lu, S., Yu, L., Li, S., Guo, Z., Du, W., & Xue, G. (2024) · Prognostics and System Health Management Conference · doi:10.1109/phm61473.2024.00065 · Cited by 1
“Eren [5] successfully applied 1DCNN to the fault diagnosis of rolling bearings.”
MethodHybrid Deep Learning Model for Robust Blade Fault Diagnosis in Multistage Rotor Systems
Imam, S. A., Lim, M. H., Abdelrhman, A. M., Ahmad, I., & Leong, M. S. (2025) · Journal of Engineering · doi:10.1155/je/7764382 · Cited by 1
Vargas, S. M., Genchi, S. A., Vitale, A. J., & Delrieux, C. A. (2025) · Remote Sensing · doi:10.3390/rs17213584 · Cited by 1
Chawalitanont, A., Bashyal, A., & Wicaksono, H. (2025) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2025.10.010 · Cited by 1
Semiconductor Bearing Fault Recognition
Akhavan, M., & Salamati, H. (2021) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.35940/ijeat.f3090.10110121 · Cited by 1
MSCNN Based Remaining Useful Life Prediction for Bearings
Jia, W., & Du, X. (2021) · IEEE International Conference on Electronic Technology, Communication and Information (ICETCI) · doi:10.1109/icetci53161.2021.9563505 · Cited by 1
Deep Learning Based Gesture Recognition System Using EMG Spectrogram Data
Amin, P., & Khan, A. M. (2023) · Lecture notes in networks and systems · doi:10.1007/978-981-99-3758-5_29 · Cited by 1
Cai, C., Guo, X., Xue, Y., & Ren, J. (2024) · Structural durability & health monitoring · doi:10.32604/sdhm.2024.045831 · Cited by 1
Ruiru, Q., & Xiaoqiang, Z. (2024) · Multimedia Tools and Applications · doi:10.1007/s11042-024-19838-w · Cited by 4
“Eren et al. [19] introduced CNN to the field of fault diagnosis by using a one-dimensional convolutional neural network to train a deep learning model directly on the original signals.”
1D-CNN Based Multi-label Aircraft Electrical Signal Classification Method
Wu, C., Wan, W., Shi, X., Liu, J., Zhang, J., Li, K., & Wang, L. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-97-7139-4_74 · Cited by 1
Subha, K. J., Jeyaraj, J. P. G., Bennet, M. A., & Kumar, T. R. D. (2024) · International Conference on Intelligent Cyber Physical Systems and Internet of Things (ICoICI) · doi:10.1109/icoici62503.2024.10696773 · Cited by 1
“Using One-Dimensional CNNs, we combine the feature extraction and classification stages of bearing defect detection, resulting in systems that are more effective and have lower computing complexity [6].”
MethodComparison of time-domain and time-scale data in bearing fault detection
Ozcan, I. H., Eren, L., İnce, T., Bilir, B., & Aşkar, M. (2019) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/acemp-optim44294.2019.9007212 · Cited by 1
“WAVELET PACKET DECOMPOSITION Wavelet transform techniques have been applied to motor fault detection applications successfully [6-16].”
MethodInfluentialSelf-citationAmin, P., & Khan, A. M. (2021) · IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER) · doi:10.1109/discover52564.2021.9663596 · Cited by 1
Lee, S., Tak, Y., Yang, H., Yang, J., Lim, G.-M., Kim, K., Choi, B.-K., & Kwon, J.-W. (2020) · arXiv (Cornell University) · Cited by 1
Blucher Engineering Proceedings
(2021) · doi:10.5151/cbgdp2021-proceedings · Cited by 1
Ma, Y., Mustapha, F. B., Ishak, M. R., Rahim, S. B. A., & Mustapha, M. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4354049 · Cited by 1
Ruiru, Q., & Zhao, X. (2023) · Research Square · doi:10.21203/rs.3.rs-2627489/v1 · Cited by 1
Huang, W., Zhou, K. Q., Zhang, J., Peng, L., & Du, G. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4718412 · Cited by 1
Khan, A. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4906643 · Cited by 1
Software-modeling complex for automation tests of low and medium power turbo electric tests
Кавалеров, Б. В., Kilin, G. A., & Ждановский, Е. О. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201914005012
Vibrations-Based Machine Fault Diagnosis and Prognosis Using Convolutional Neural Networks
Hendriks, J. (2021) · uO Research (University of Ottawa) · doi:10.20381/ruor-26299 · Cited by 1
Intelligent Fault Diagnosis Based on Dynamic Convolutional Depth Domain Adaptive NetworkPreprint
Zhou, H., Cheng, P., Shao, S., Zhao, Y., & Yang, X. (2021) · Research Square · doi:10.21203/rs.3.rs-903138/v1
“Nowadays, machine learning models such as artificial neural network (ANN), support vector machine (SVM), convolutional neural network (CNN), and autoencoder (AE)[2-8] have been applied successfully in machine fault diagnosis and have achieved some remarkable results.”
BackgroundSemiconductor Bearing Fault Recognition
Mishra, N., Chaturvedi, I., & Mehta, J. (2021) · International Journal of Engineering and Advanced Technology · doi:10.35940/ijeat.f3090.1011121
Deep learning for vibration-based data-driven defect diagnosis of structural systems
Tang, H., Xie, Y., & Ran, L. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-817784-6.00018-7
Rezaeianjouybari, B. (2021) · MOspace Institutional Repository (University of Missouri) · doi:10.32469/10355/90086
Khan, A. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4511627
Fault Diagnosis for Time Series Signal based on Transfer Learning in Time-Frequency Domain
Lo, W.-C., Lee, C. K. M., Wong, C., & Huang, J. (2023) · International Symposium on System Security, Safety, and Reliability (ISSSR) · doi:10.1109/isssr58837.2023.00072
“Various ML models, from statistical learning (or shallow learning) to Deep Learning (DL), were reported [2-3].”
BackgroundSub-macroscopic inclusion classification in bearing steels based on LFCN and ultrasonic testing
Zhang, N., Chen, X., & Wang, Y. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad6788
“Eren [47] and Avci et al [48] applied 1D CNNs to classify raw bearing vibration signals, which all showed excellent performances.”
Zhang, Q., Tang, L., Qin, J., Duan, J., & Zhou, Y. (2024) · Entropy · doi:10.3390/e26110956
“Eren et al. [11] used CNN for fault diagnosis of gearbox bearings and gears, achieving a 6% improvement in classification accuracy.”
Impact of Adipose Thickness on Channel Analysis-based Tumor Detection in Capsule Endoscopy
Särestöniemi, M., Taparugssanagorn, A., Thaweesukolrat, N., Iinatti, J., & Myllylä, T. (2025) · International Symposium on Medical Information and Communication Technology · doi:10.1109/ismict64722.2025.11059421
Bearing Fault Diagnosis via Adaptive Feature Fusion Networks
Gong, Y., Hu, H., Liu, Z., Song, Y., Yang, J., & Duan, Q. (2025) · International Symposium on Autonomous Systems (ISAS) · doi:10.1109/icaisisas64483.2025.11052178
Wu, L., Liu, X., Palamarciuc, I., Bajwa, R. S., Zhang, Y., & Dwyer-Joyce, R. S. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5439145
Rolling Bearing Fault Diagnosis Method Based on Multi-Scale Adaptive Domain Adversarial Learning
Yang, D., Li, W., & Yan, B. (2025) · Chinese Control Conference (CCC) · doi:10.23919/ccc64809.2025.11179237
“Reference [4], convolutional layers were applied to the discriminator of a fault diagnosis model to extract deeper-level details.”
Hosseinzadeh, M., Barbiroli, M., Prete, S. D., & Fuschini, F. (2025) · Sensors · doi:10.3390/s25226809 · Cited by 1
“More recent works have also highlighted their effectiveness in identifying damage in mechanical components such as bearings [50,51].”
Research on Vehicle State Recognition Based on Improved CNN
Hu, H., Feng, F., Zhu, J., Song, C., Wen, Z., & Liu, H. (2025) · International Conference on Equipment Intelligent Operation and Maintenance (ICEIOM) · doi:10.1109/iceiom65271.2025.11239831
“Li Tao et al. [15] proposed a Particle Swarm Optimization (PSO)-optimized adaptive CNN for rotating machinery fault diagnosis, achieving high accuracy.”
Namdari, H., Bakhshipour, A. E., Ashrafi, S. M., & Haghighi, A. (2025) · Sustainable Water Resources Management · doi:10.1007/s40899-025-01316-2
“A 1D CNN is a specialized type of convolutional neural network that uses one-dimensional arrays instead of two-dimensional matrices in its convolution and pooling layers to generate feature maps (Eren 2017 ; Kiranyaz et al. 2018; Azizjon et al. 2020 ).”
A bearing fault detection method using pseudo-labeling CNN models and multiple frequency analysis
Wang, Z., Tian, J., Yang, B., Xiao, W., & Li, L. (2025) · Robotic Intelligence and Automation · doi:10.1108/ria-08-2025-0247
Robust Peak Detection of Shifting Fault Characteristic Frequencies for Bearing
Wardhana, I., Gouiaa-Mtibaa, A., Vrignat, P., & Kratz, F. (2025) · International Conference on Applied Automation and Industrial Diagnostics (ICAAID) · doi:10.1109/icaaid68975.2025.11358038
“Bearing fault frequencies are grouped into four zones: shaft speed, bearing defect frequency, bearing natural resonances, and high-frequency zones [3], as shown in Fig.”
Wu, L., Liu, X., Palamarciuc, I., Bajwa, R. S., Zhang, Y., & Dwyer-Joyce, R. S. (2026) · Wear · doi:10.1016/j.wear.2026.206592 · Cited by 1
Jin, H., Zhou, Y., Wang, H., Lu, Q., Fan, Z., & Liu, Y. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3677990
Modélisation des séries temporelles par apprentissage profond
Haykal, V. (2019) · theses.fr (ABES) · doi:10.70675/5f7a222bzd740z48a2z9951z429c68aa91a3
Aviña, S., Yparrea-Arreola, R. I., Rocha-Martinez, M. N., & Alvarado, M. G. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6839608
Research on Intelligent Bearing Fault Diagnosis Based on Meta-CGAN
Wang, K., Luo, K., Dong, F., Ma, Y.-K., Han, M.-H., & Ma, Y.-B. (2026) · Chinese Control and Decision Conference (CCDC) · doi:10.1109/ccdc69976.2026.11560162
“End-to-end feature learning methods such as convolutional neural network (CNN) [9], long short-term memory network (LSTM) [10][11], and deep belief network (DBN) [12] can automatically extract deep representations from raw data, reducing reliance on manual expertise, and have achieved significant…”
Patel, R. K., Yadav, S., & Singh, V. P. (2026) · International Conference on Computational Intelligence and Communication Networks (CICN) · doi:10.1109/cicn70047.2026.11594387
“Using the CWRU open-access bearing dataset, Hoang and Kang [14] employed a unique CNN model that converts a 1D signal into a 2D signal and achieved a defect detection accuracy close to 100%.”
Sonkar, N., Devmishra, K., Ranawat, N. S., Miglani, A., & Kankar, P. K. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2026.116255
苗金林, Guo, Q., Yang, H., Yang, X., Zhang, H., Hao, J., & Tan, H. (2026) · Electronics · doi:10.3390/electronics15204798
Metadata
- Authors
- Eren, L.
- Affiliations
- İzmir University of Economics (TR)
- Corresponding author
- Eren, Levent
- ORCID
- Eren, Levent
- Venue
- Mathematical Problems in Engineering
- Publisher
- Wiley
- Published
- 2017-01
- Volume
- 2017
- Issue
- 1
- ISSN
- 1024-123X (ISSN-L)
- 1563-5147
- OpenAlex
- W2737404945
- Cited by
- 250
- References
- 36
- Citations by year
- 2026: 12 · 2025: 31 · 2024: 38 · 2023: 23 · 2022: 40 · 2021: 41 · 2020: 35 · 2019: 22 · 2018: 8
- FWCI
- 11.17
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Mathematical Problems in Engineering (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical Fault Detection and Protection
- Keywords
- bearing fault detection, 1D convolutional neural network, vibration signal analysis, end-to-end feature extraction, computational complexity reduction, real-time fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.