The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application
Open accessAbstract
Additive manufacturing (AM) is rapidly gaining acceptance in the healthcare sector. Three-dimensional (3D) virtual surgical planning, fabrication of anatomical models, and patient-specific implants (PSI) are well-established processes in the surgical fields. Polyetheretherketone (PEEK) has been used, mainly in the reconstructive surgeries as a reliable alternative to other alloplastic materials for the fabrication of PSI. Recently, it has become possible to fabricate PEEK PSI with Fused Filament Fabrication (FFF) technology. 3D printing of PEEK using FFF allows construction of almost any complex design geometry, which cannot be manufactured using other technologies. In this study, we fabricated various PEEK PSI by FFF 3D printer in an effort to check the feasibility of manufacturing PEEK with 3D printing. Based on these preliminary results, PEEK can be successfully used as an appropriate biomaterial to reconstruct the surgical defects in a “biomimetic” design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 15-year study of osseointegrated implants in the treatment of the edentulous jaw
Adell, R., Lekholm, U., Rockler, B., & Brånemark, P.-I. (1981) · International Journal of Oral Surgery · doi:10.1016/s0300-9785(81)80077-4 · Cited by 4,816
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
PEEK biomaterials in trauma, orthopedic, and spinal implants
Kurtz, S. M., & Devine, J. N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.013 · Cited by 2,388
Novel bioactive materials with different mechanical properties
Kokubo, T., Kim, H.-M., & Kawashita, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00044-9 · Cited by 1,914
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Navarro, M., Michiardi, A., Castaño, O., & Planell, J. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0151 · Cited by 1,513
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Innovations in 3D printing: a 3D overview from optics to organs
Schubert, C., van Langeveld, M. C., & Donoso, L. A. (2014) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2013-304446 · Cited by 753
Current Strategies to Improve the Bioactivity of PEEK
Ma, R., & Tang, T. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15045426 · Cited by 491
Extrusion-based additive manufacturing of PEEK for biomedical applications
Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 406
Underlying mechanisms at the bone–biomaterial interface.
Schwartz, Z., & Boyan, B. D. (1994) · Journal of Cellular Biochemistry · doi:10.1002/jcb.240560310 · Cited by 397
Emerging Applications of Bedside 3D Printing in Plastic Surgery
Chae, M. P., Rozen, W. M., McMenamin, P. G., Findlay, M. W., Spychal, R. T., & Hunter-Smith, D. J. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00025 · Cited by 377
3D modeling, custom implants and its future perspectives in craniofacial surgery
Parthasarathy, J. (2014) · Annals of Maxillofacial Surgery · doi:10.4103/2231-0746.133065 · Cited by 377
3D-printed patient-specific applications in orthopedics
Wong, K. C. (2016) · Orthopedic Research and Reviews · doi:10.2147/orr.s99614 · Cited by 361
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Hoang, D., Perrault, D., Stevanovic, M., & Ghiassi, A. (2016) · Annals of Translational Medicine · doi:10.21037/atm.2016.12.18 · Cited by 317
Nanomodified Peek Dental Implants: Bioactive Composites and Surface Modification—A Review
Najeeb, S., Khurshid, Z., Matinlinna, J. P., Siddiqui, F., Nassani, M. Z., & Baroudi, K. (2015) · International Journal of Dentistry · doi:10.1155/2015/381759 · Cited by 175
Rohner, D., Hutmacher, D. W., Cheng, T. K., Oberholzer, M., & Hammer, B. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10037 · Cited by 171
Medical rapid prototyping applications and methods
Hieu, L. C., Zlatov, N., Sloten, J. V., Bohez, E. L. J., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y. (2005) · Assembly Automation · doi:10.1108/01445150510626415 · Cited by 152
Rana, M., Chui, C. H. K., Wagner, M., Zimmerer, R. M., Rana, M., & Gellrich, N. (2015) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.joms.2015.02.014 · Cited by 146
Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates
Winder, J. R., Cooke, R. S., Gray, J., et al. (1999) · Journal of Medical Engineering & Technology · doi:10.1080/030919099294401 · Cited by 139
Nonresorbable polymers in bone surgery
Eschbach, L. (2000) · Injury · doi:10.1016/s0020-1383(00)80019-4 · Cited by 129
Tuomi, J., Paloheimo, K., Vehviläinen, J., Björkstrand, R., Salmi, M., Huotilainen, E., Kontio, R. K., Rouse, S., Gibson, I., & Mäkitie, A. A. (2014) · Surgical Innovation · doi:10.1177/1553350614524838 · Cited by 89
Three dimensional printing: A review on the utility within medicine and otolaryngology
Kaye, R. J., Goldstein, T. A., Zeltsman, D., Grande, D. A., & Smith, L. P. (2016) · International Journal of Pediatric Otorhinolaryngology · doi:10.1016/j.ijporl.2016.08.007 · Cited by 76
Conversion of RP models to investment castings
Dickens, P., Stangroom, R., Greul, M., Holmer, B., Hon, K. K. B., Hovtun, R., Neumann, R., Nöken, S., & Wimpenny, D. I. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510104401 · Cited by 67
Craniofacial Reconstruction by a Cost-Efficient Template-Based Process Using 3D Printing
Msallem, B., Beiglboeck, F. M., Honigmann, P., Jaquiéry, C., & Thieringer, F. M. (2017) · Plastic & Reconstructive Surgery Global Open · doi:10.1097/gox.0000000000001582 · Cited by 65
Self-citationJiya, T. U., Smit, T. H., Deddens, J. A., & Mullender, M. G. (2009) · Spine · doi:10.1097/brs.0b013e318194ed00 · Cited by 49
DIAGNOSING CLEFT LIP PATHOLOGY IN 3D ULTRASOUND: A LANDMARKING-BASED APPROACH
Vezzetti, E., Speranza, D., Marcolin, F., & Fracastoro, G. (2015) · Image Analysis & Stereology · doi:10.5566/ias.1339 · Cited by 21
Cited by
Additive Manufacturing Processes in Medical Applications
Salmi, M. (2021) · Materials · doi:10.3390/ma14010191 · Cited by 500
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Fused filament fabrication of peek: A review of process-structure-property relationships
Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240
Metadata
- Authors
- Honigmann, P., Sharma, N., Okolo, B., Popp, U., Msallem, B., & Thieringer, F. M.
- Venue
- BioMed Research International
- Publisher
- Wiley
- Published
- 2018
- Volume
- 2018
- Pages
- 1-8
- ISSN
- 1110-7243 (ISSN-L)
- 2314-6133
- 2314-6141
- OpenAlex
- W2793102437
- Cited by
- 275
- References
- 32
- FWCI
- 9.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.