The DOI matches its Crossref record; 164 of the 164 references it cites were found in a registry or an index; 18 of the 128 sources its claims cite were checked for support.
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Open accessAbstract
Untimely machinery breakdown will incur significant losses, especially to the manufacturing company as it affects the production rates. During operation, machines generate vibrations and there are unwanted vibrations that will disrupt the machine system, which results in faults such as imbalance, wear, and misalignment. Thus, vibration analysis has become an effective method to monitor the health and performance of the machine.
Overview
CoChat Summary
TL;DR
This systematic review synthesizes vibration analysis for machine monitoring and diagnosis across data acquisition, feature extraction, and AI-based fault recognition. It reports that AI-based techniques account for about 57% of reviewed methods, with RMS, FFT, WT, and SVM among the most used, and highlights deep learning/deep transfer learning and noncontact sensors as future directions.
Key findings
- AI-based techniques contribute about 57% of the overall vibration analysis methods reviewed; SVM is the most widely used AI method, attributed to high classification accuracy and low computational time.
- The most applied methods are RMS in the time domain, FFT in the frequency domain, and WT in the time-frequency domain; almost 80% of previous studies applied feature extraction/signal processing techniques such as envelope analysis, STFT, WT, and HHT, with or without AI.
- Accelerometer remains the best sensor option for vibration analysis; computer-based analyzers with DSP/FPGA are nearly as good as conventional analyzers, and noncontact sensors/LDV are expected to be widely applied in the future due to flexibility and independence from mass-loading effects.
- Deep learning/DNN can automatically extract fault features from raw vibration signals, while traditional time-domain features such as RMS and crest factor remain relevant and their application with AI is expected to continue increasing. Cited studies report accuracies including 93.33% for crest factor + SVM gear fault diagnosis, 99.3% for STFT + NMF rolling bearing fault detection, 100% for CEEMDAN + PSO-LSSVM rolling bearing diagnosis, and 95% for decision tree + fuzzy logic spur gear fault diagnosis.
Methods
- A Systematic Literature Review (SLR) approach was employed to collect relevant primary studies and answer five research questions; selected papers were classified and analyzed through content analysis.
- Results were classified into survey, simulation, and experiment/real-time deployments; more than 100 articles were discussed, covering data acquisition instruments, feature extraction methods, and AI-based fault recognition.
- The review follows the three main vibration analysis steps: data acquisition, signal processing/feature extraction, and fault recognition; due to the wide range of techniques, only widely used ones are discussed.
Limitations
- The paper states that a review of all literature is impossible and some papers might be omitted; only widely used techniques are discussed.
- The paper states that most reported studies applied vibration analysis on one test rig or machine and in controlled environments, so excellent results cannot be guaranteed on other machines or in industrial settings; AI data-driven methods may also face generalization issues when entirely new datasets are used.
- The paper states that most existing methods assume Gaussian vibration signals, while industrial signals are often corrupted by non-Gaussian noise not widely considered; Digital Twin modeling remains challenging due to nonlinear dynamics and uncertainty in smart machines.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 9 Not valid · 101 Not checked · 57 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Kurtosis feature can provide the information regarding the non-Gaussianity or impulsiveness of the vibration signals [68,69].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 7.4. Kurtosis.
What the sources say
- Partly supportedcites [68] 68. P. H. Westfall, "Kurtosis as p," e American Statistician, vol. 68, no. 3, pp. 191-195, 2014. sourceExperimental — accuracy not yet measured
Section 3 (“How Data Look”; page unavailable) says sample kurtosis primarily reflects outliers, supporting its use as an indicator of extreme or impulsive observations. Section 4 compares kurtosis with that of a normal distribution, but the paper does not examine vibration signals or establish kurtosis as a measure of their non-Gaussianity. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [69] 69. J. Hebda-Sobkowicz, R. Zimroz, and A. Wyłomańska, "Se- lection of the informative frequency band in a bearing fault diagnosis in the presence of non-Gaussian noise-comparison of recently developed methods," Applied Sciences, vol. 10, no. 8, p. 2657, 2020. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“FFT is also unable to investigate the transient features efficiently in time and can predict the fault but cannot determine the severity of fault [3].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 8.1. FFT.
What the sources say
- Partly supportedcites [3] 3. S. Kumar, M. Lokesha, K. Kumar, and K. Srinivas, "Vibration based fault diagnosis techniques for rotating mechanical components: review paper," in Proceedings of the Interna- tional Conference on Advances in Manufacturing, Materials and Energy Engineering, pp. 1-6, Karnataka, India, June 2018. sourceExperimental — accuracy not yet measured
The Review (p. 3) says FFT can predict a gear fault but cannot determine its severity. The Review (p. 6) says wavelet analysis detects transient components efficiently and outperforms FFT power-spectrum analysis, but it does not specifically say FFT is unable to investigate transient features efficiently in time. (LLM, conf=0.85)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 9.2. WVD.
What the sources say
- Could not verifycites [93] 93. Y. Wei, Y. Li, M. Xu, and W. Huang, "A review of early fault diagnosis approaches and their applications in rotating machinery," Entropy, vol. 21, no. 4, p. 409, 2019. sourceExperimental — accuracy not yet measured
Section 2.1.2 discusses wavelet transforms, and Section 3.2 discusses their applications, but neither addresses WVD or its use for determining time-frequency structures. Searches for “WVD,” “Wigner Ville distribution,” and “cross-term interference” found no passage stating the claimed reason for avoiding direct use of WVD. (LLM, conf=0.72)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In terms of noise, most of the reported existing methods can effectively distinguish noise from vibration signals.”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 11. Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
In the paper
“e results showed that NN performed better for nonstationary signals in the time-frequency domain compared to the frequency domain.”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 10.2. NN.
What the sources say
- Not matchedcites [137] 137. M. R. Castelino, H. S. Kumar, P. P. Srinivasa, and G. S. Vijay, "Artificial neural network-based vibration signal analysis of rotary machines-case studies," in Proceedings of the Inter- national Conference on Emerging Trends in Engineering, pp. 211-218, Karnataka, India, July 2014.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
43 more claims
Create a free account to see all 182 claims and every source verdict.
- It may state two separate claims as one. 77
- Probably not a substantial claim. 95
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 5.3. Velocity Transducer.
“most velocity transducers are prone to reliability problems at operational temperatures that exceed 121 ° C”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 762
“to reliability problems at operational frequency of more than 121 ° C”
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 1×
“, Huang et al. [108] introduced the HHT in 1998 to determine the characteristics of stationary, nonstationary, and transient signals.”
BackgroundA review on genetic algorithm: past, present, and future
Katoch, S., Chauhan, S. S., & Kumar, V. (2021) · Multimedia Tools and Applications · doi:10.1007/s11042-020-10139-6 · Cited by 4,655 · cited 1×
“GA. GA, derived from a study of a biological system, can solve both constrained and unconstrained optimization problems based on a natural selection process [164, 165].”
BackgroundDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
A complete ensemble empirical mode decomposition with adaptive noise
Torres, M. E., Colominas, M. A., Schlotthauer, G., & Flandrin, P. (2011) · 2011 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2011.5947265 · Cited by 2,801 · cited 1×
“However, in the low-frequency region, the energy leakage and modal aliasing problems still exist. is what motivates Torres et al. [110] to propose the complete EEMD with adaptive noise (CEEMDAN) method, which can produce better modal frequency spectrum separation outputs.”
MethodZadeh, L. A. (1988) · Computer · doi:10.1109/2.53 · Cited by 1,824
Theory of communication. Part 1: The analysis of information
Gabor, D. (1946) · Journal of the Institution of Electrical Engineers - Part III: Radio and Communication Engineering · doi:10.1049/ji-3-2.1946.0074 · Cited by 1,795 · cited 1×
“STFT. STFTwas pioneered by Gabor back in 1946 in the communication field [117].”
BackgroundFedHealth: A Federated Transfer Learning Framework for Wearable Healthcare
Chen, Y., Qin, X., Wang, J., Yu, C., & Gao, W. (2020) · IEEE Intelligent Systems · doi:10.1109/mis.2020.2988604 · Cited by 1,005 · cited 1×
“Compared to the NN and SVM method, the DNN approach can adaptively learn the hierarchical representation from raw data through multiple nonlinear transformations and approximate complex nonlinear functions instead of extracting the fault feature manually [141].”
MethodFeng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998 · cited 5×
“HHT consists of empirical mode decomposition (EMD) of signals and Hilbert transform, and by combining these two methods, a Hilbert spectrum can be obtained, where the faults in a running machine can be diagnosed [92].”
BackgroundMethodInfluentialFEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879 · cited 2×
“Time-frequency domain A study on applying the CWT method in the feature extraction of mechanical vibration signals conducted by [101].”
MethodPeng, Z. K., Tse, P. W., & Chu, F. L. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.01.006 · Cited by 840 · cited 1×
“Peng et al. [111] introduced a better version of HHT that incorporated the WPT technique to decompose the vibration signal into a set of narrowband signals. proposed method was shown to have a better resolution in the time and frequency domain compared to the wavelet-based scalogram.”
Method
Research works printed but not linked: 15
- Aherwar A., 2012, Vibration analysis techniques for gearbox diagnostic: a review, International Journal of Advances in Engineering & Technology, 3, 4
- Elango S., 2018, Vibration analysis of bearing by using mechanical stethoscope, International Journal of Advanced Science and Research, 3, 1137
- Norton H. N., 1989, Handbook of Transducers
- SalamiM.-J. E. GaniA. andPervezT. Machine condition monitoring and fault diagnosis using spectral analysis techniques Proceedings of the 1st International Conference on Mechatronics June 2001 Kuala Lumpur Malaysia 690–700.
- Doscher J., 1999, Adxl105: a lower-noise, wider-bandwidth accelerometer rivals performance of more expensive sensors, Analog Dialogue, 33, 27
- Fernandez A., 2020, Seismic Velocity Transducers
- SarhanA. A. MatsubaraA. IbarakiS. andKakinoY. Monitoring of cutting force using spindle displacement sensor Proceedings of the Japan – USA Symposium on Flexible Automation July 2004 Denver CO USA 1–4.
- HowardI. A review of rolling element bearing vibration’detection diagnosis and prognosis ” Report for the Defence Science and Technology Organization Canberra (Australia). Report no. DSTO-RR-0013 October. Victoria 1994 DSTO Aeronautical and Maritime Research Laboratory. Tech. Rep.
- LahdelmaS.andJuusoE. Signal processing in vibration analysis Proceedings of the 5th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies July 2008 Edinburgh Scotland 867–878.
- 10.1016/j.matpr.2017.02.140 · DOI · Paper page
- RunessonJ. Vibration analysis for condition monitoring of mechanical presses 2019 Lund University Lund Sweden Master’s Thesis.
- DalpiazG. RivolaA. andRubiniR. Gear fault monitoring: comparison of vibration analysis techniques Proceedings of the 3rd International Conference Acoustical and Vibratory Surveillance Methods and Diagnostics Techniques January 1998 Las Vegas NV USA 623–632.
- Randall R. B., 1987, Frequency Analysis
- SafizadehM. LakisA. andThomasM. Using short-time fourier transform in machinery diagnosis Proceedings of the 4th WSEAS International Conference on Electronic Signal Processing and Control April 2005 Rio de Janeiro Brazil 1–7.
- CastelinoM. R. KumarH. S. SrinivasaP. P. andVijayG. S. Artificial neural network-based vibration signal analysis of rotary machines-case studies Proceedings of the International Conference on Emerging Trends in Engineering July 2014 Karnataka India 211–218.
Cited by
A Review on Vibration Monitoring Techniques for Predictive Maintenance of Rotating Machinery
Romanssini, M., de Aguirre, P. C. C., Compassi-Severo, L., & Girardi, A. G. (2023) · Eng · doi:10.3390/eng4030102 · Cited by 159
Varghese, H., Hakkeem, H. M. A., Chauhan, K., Thouti, E., Pillai, S., & Chandran, A. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107339 · Cited by 148
Vibration signal-based early fault prognosis: Status quo and applications
Lv, Y., Zhao, W., Zhao, Z., Li, W., & Ng, K. K. H. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101609 · Cited by 135
An In-Depth Study of Vibration Sensors for Condition Monitoring
Hassan, I. U., Panduru, K., & Walsh, J. (2024) · Sensors · doi:10.3390/s24030740 · Cited by 189
“Real-time Monitoring: Continuous monitoring provides real-time analysis of equipment performance [72] as well as frequent alerts for any defects or deviations from standard operating conditions.”
BackgroundMethodAI for tribology: Present and future
Yin, N., Yang, P., Liu, S., Pan, S., & Zhang, Z. (2024) · Friction · doi:10.1007/s40544-024-0879-2 · Cited by 109
“Its main purpose is to promptly detect faults in situ and implement preventive measures [279–281].”
Bagri, I., Tahiry, K., Hraiba, A., Touil, A., & Mousrij, A. (2024) · Vibration · doi:10.3390/vibration7040054 · Cited by 95
Zhong, J., Zheng, Y., Ruan, C., Chen, L., Bao, X., & Lyu, L. (2024) · Information Fusion · doi:10.1016/j.inffus.2024.102761 · Cited by 64
Afanaseva, O., Bezyukov, O. K., Первухин, Д. А., & Tukeev, D. L. (2023) · Inventions · doi:10.3390/inventions8030071 · Cited by 55
Machine Learning Meets Compressed Sensing in Vibration-Based Monitoring
Zonzini, F., Carbone, A., Romano, F., Zauli, M., & Marchi, L. D. (2022) · Sensors · doi:10.3390/s22062229 · Cited by 48
Edge-to-Cloud IIoT for Condition Monitoring in Manufacturing Systems with Ubiquitous Smart Sensors
Li, Z., Fei, F., & Zhang, G. (2022) · Sensors · doi:10.3390/s22155901 · Cited by 48
Chennana, A., Megherbi, A. C., Bessous, N., Sbaa, S., Teta, A., Belabbaci, E. O., Rabehi, A., Guermoui, M., & Agajie, T. F. (2025) · Scientific Reports · doi:10.1038/s41598-025-93133-y · Cited by 57
Health monitoring of CNC machining processes using machine learning and wavelet packet transform
Hussain, A., Janjua, T. A. M., Malik, A. N., Najib, A., & Khan, S. A. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111326 · Cited by 40
Yu, H., Xi, Z., Zhang, Y., et al. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108182 · Cited by 37
Khalil, A. F., & Rostam, S. (2024) · Engineering Technology & Applied Science Research · doi:10.48084/etasr.6813 · Cited by 37
“The vibration signals from rotating equipment can be gathered easily during operation, reflecting their operating conditions in real-time, thus, current trends in machinery fault diagnostics mainly rely on vibration signal analysis [7].”
BackgroundGómez-Gil, F. J., Martínez-Martínez, V., Ruiz-Gonzalez, R., Martínez-Martínez, L., & Gil, J. (2024) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2023.108556 · Cited by 43
Research and Development of Fault Diagnosis Methods for Liquid Rocket Engines
Wang, T., Ding, L., & Yu, H. (2022) · Aerospace · doi:10.3390/aerospace9090481 · Cited by 33
“With the continuous development and improvement of related fault detection approaches, the related technical achievements that have been obtained are related to practical engineering applications.”
BackgroundLi, D.-Y., Pang, Z., Chen, Y., Yang, K., Shao, J.-Y., Luo, Y.-C., Zeng, Y., He, C., & Gao, Y.-T. (2025) · Mechanical systems and signal processing · doi:10.1016/j.ymssp.2025.113226 · Cited by 47
Fault Diagnosis of Crack on Gearbox Using Vibration-Based Approaches
Mohammed, S. A., Ghazaly, N. M., & Abdo, J. (2022) · Symmetry · doi:10.3390/sym14020417 · Cited by 28
Wan, A., Tong, X., AL-Bukhaiti, K., Zhou, Z., Su, Y., Cheng, X., & Ji, X. (2025) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062251347475 · Cited by 28
“22,24 The successful prediction of Faults 2, 5, and 6 (Figures 6–8) demonstrates the model’s capability to handle diverse fault severities, which could translate to systems exhibiting analogous temporal and spectral vibration patterns.”
Establishment of a Feeding Rate Prediction Model for Combine Harvesters
Liang, Z., Qin, Y., & Su, Z. (2024) · Agriculture · doi:10.3390/agriculture14040589 · Cited by 26
Physical Variable Measurement Techniques for Fault Detection in Electric Motors
Aguayo-Tapia, S., Avalos-Almazan, G., Rangel‐Magdaleno, J., et al. (2023) · Energies · doi:10.3390/en16124780 · Cited by 25
Zhou, J., Chen, C., Guo, J., Wang, L., Liu, Z., & Feng, C. (2023) · Measurement · doi:10.1016/j.measurement.2023.113395 · Cited by 26
Ma, L., Li, Z., Yang, S., & Wang, J. (2025) · Vibration · doi:10.3390/vibration8040056 · Cited by 41
“These observations high-light the indispensable role of precise vibration measurement and analysis in various engineering disciplines [11].”
Ewert, P., Kowalski, C. T., & Jaworski, M. (2022) · Electronics · doi:10.3390/electronics11111748 · Cited by 27
Wu, T., Zhang, W., Zhang, B., & Luo, H. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109792 · Cited by 21
The Fault Diagnosis of Rolling Bearings Based on FFT-SE-TCN-SVM
Wu, Y., Dai, J., Yang, X., et al. (2025) · Actuators · doi:10.3390/act14030152 · Cited by 17
Aldeoes, Y. N., Mahajan, P., & Sondkar, S. (2024) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-024-02036-z · Cited by 18
Diversi, R., Lenzi, A., Speciale, N., & Barbieri, M. (2025) · Sensors · doi:10.3390/s25041130 · Cited by 27
“Although vibration analysis remains the most widely used method [5,7,8], motor current signature analysis (MCSA) has gained increasing attention in recent years [9–17].”
Niola, V., Cosenza, C., Fornaro, E., Malfi, P., Melluso, F., Nicolella, A., Savino, S., & Spirto, M. (2025) · Applied Sciences · doi:10.3390/app15042135 · Cited by 20
Ovacıklı, A. K., Yağcıoğlu, M., Demircioğlu, S., Kocatekin, T., & Birtane, S. (2025) · Applied Sciences · doi:10.3390/app15137580 · Cited by 23
Ibrahim, R., Zemouri, R. M., Kedjar, B., Merkhouf, A., Tahan, A. S., Al‐Haddad, K., & Lafleur, F. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3281311 · Cited by 18
“In[20]and[21],existingvibrationmonitoringtech-niquesforvariouscomponentsofthesynchronousmachinewere reviewed.”
Recent Advances in Vibration Analysis for Predictive Maintenance of Modern Automotive Powertrains
Shah, R., Mittal, V., & Lotwin, M. (2025) · Vibration · doi:10.3390/vibration8040068 · Cited by 23
Factory-Based Vibration Data for Bearing-Fault Detection
Lundström, A., & O’Nils, M. (2023) · Data · doi:10.3390/data8070115 · Cited by 15
Lakshmipathi, J., Devaraj, S., Marikkannan, S., Gnanasekaran, S., Ramasamy, S., Rakkiyannan, J., & Xu, Y. (2022) · Applied Sciences · doi:10.3390/app122312100 · Cited by 16
Ship Diesel Engine Fault Diagnosis Using Data Science and Machine Learning
Pająk, M., Kluczyk, M., Muślewski, Ł., Lisjak, D., & Kolar, D. (2023) · Electronics · doi:10.3390/electronics12183860 · Cited by 27
Bearing Fault Diagnosis Based on Artificial Intelligence Methods: Machine Learning and Deep Learning
Ghorbel, A., Eddai, S., Limam, B., Féki, N., & Haddar, M. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09488-3 · Cited by 24
A novel intelligent approach based on WOAGWO-VMD and MPA-LSSVM for diagnosis of bearing faults
Taibi, A., Ikhlef, N., & Touati, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08852-7 · Cited by 13
“According to Mohd Ghazali and Rahiman [5], the vibrational diagnosis technique represents more than 82% of the overall other techniques used in fault diagnosis.”
MethodHighly Reliable Multicomponent MEMS Sensor for Predictive Maintenance Management of Rolling Bearings
Landi, E., Prato, A., Fort, A., et al. (2023) · Micromachines · doi:10.3390/mi14020376 · Cited by 13
“Metrological characterizations and suitable calibration procedures of sensors used in the monitoring networks are needed to guarantee the reliability of the measurements [20], providing high quality [21] and trustworthy information [22], ensuring a learning process based on reliable and accurate data [23]; moreover, i…”
MethodQi, R., Zhao, T., Wei, B., Peng, B., Chen, Z., & Wang, X. (2025) · Measurement · doi:10.1016/j.measurement.2025.118441 · Cited by 15
Vibration-based SHM of Dębica railway steel bridge with optimized ANN and ANFIS
Nguyen, D. C., Salamak, M., Katunin, A., Poprawa, G., Przystałka, P., & Hypki, M. (2024) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2024.108505 · Cited by 16
Siddiqui, M. M. U. Z., & Tabassum, A. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00816-5 · Cited by 25
“This enables the instant detection of aberrant vibration patterns and departures from baseline signatures [246].”
Detection of defects in a bearing by analysis of vibration signals
Bouaouiche, K., Menasria, Y., & Khalfa, D. (2023) · Diagnostyka · doi:10.29354/diag/162230 · Cited by 11
“Conditional maintenance consists of several techniques applied to the industrial environment, but the vibration signal analysis is a better technique for diagnosing bearings, gears, and other components of rotating machines [1].”
BackgroundSenjoba, L., Ikeda, H., Toriya, H., Adachi, T., & Kawamura, Y. (2024) · Applied Sciences · doi:10.3390/app14093621 · Cited by 11
Non-destructive testing methods for condition monitoring: A review of techniques and tools
Hassan, I. U., Panduru, K., & Walsh, P. J. (2025) · Procedia Computer Science · doi:10.1016/j.procs.2025.03.055 · Cited by 15
A vibration-based machine learning approach for roller gap detection in biomass pellet production
Nielsen, M. K., Nielsen, S. K., & Tambo, T. (2024) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2024.11.007 · Cited by 11
Barella, B. P., Rosa, R. G., Oliveira, G. M. B., & Fernandes, H. (2024) · Quantitative InfraRed Thermography Journal · doi:10.1080/17686733.2024.2432079 · Cited by 10
Robust and Superhydrophobic CelluMOF Triboelectric Materials Enabled by H‐Bond/Ionic Coordinations
Wu, Z., Cai, C., Meng, X., Liu, Y., Liu, T., & Zhao, Z. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202514745 · Cited by 11
Kumar, A., Sathujoda, P., & Bhalla, N. A. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1248/1/012027 · Cited by 10
“Condition monitoring techniques are; vibration monitoring[4], temperature monitoring, noise monitoring, current monitoring, oil and debris monitoring, conductivity and insulation monitoring and corrosion”
BackgroundDhakar, A., Singh, B., & Gupta, P. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad5497 · Cited by 13
Condition-Based Monitoring on High-Precision Gearbox for Robotic Applications
Hajj, M. A. A., Quaglia, G., & Schulz, I. (2022) · Shock and Vibration · doi:10.1155/2022/6653723 · Cited by 10
A Deployable Edge Computing Solution for Machine Condition Monitoring
Zhao, X., & Wang, P. E. (2024) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc60896.2024.10560795 · Cited by 11
“For vibration monitoring, MEMS accelerometers are commonly adopted because of their high sensitivity, cost-effectiveness, and strong reliability [21].”
BackgroundXie, F., Fan, Q., Li, G., Wang, Y., Sun, E., & Zhou, S. (2024) · Entropy · doi:10.3390/e26090810 · Cited by 9
Electric Vehicle Motor Fault Detection with Improved Recurrent 1D Convolutional Neural Network
Kumar, P., Prince, P., Sinha, A. K., & Kim, H. S. (2024) · Mathematics · doi:10.3390/math12193012 · Cited by 16
Salem, B., Abdullah, M. N., Mustapha, F. B., et al. (2025) · Drones · doi:10.3390/drones9020102 · Cited by 9
Park, J. G., Park, J. G., Kim, B., et al. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.111224 · Cited by 9
Dubaish, A. A., & Jaber, A. A. (2023) · Engineering and Technology Journal · doi:10.30684/etj.2023.142462.1535 · Cited by 14
Tan, Y., Ali, M., Su, Z., et al. (2025) · Measurement · doi:10.1016/j.measurement.2025.117528 · Cited by 8
Advanced Sensor Technologies in Cutting Applications: A Review
Hassan, M., Kirwin, R. M., Rakurty, C. S., & Mahajan, A. (2026) · Sensors · doi:10.3390/s26030762 · Cited by 12
“One major challenge is signal complexity, as vibration data often contains noise from multiple sources, making accurate fault diagnosis difficult [42].”
Shakir, S., & Jaber, A. A. (2024) · FME Transaction · doi:10.5937/fme2401103s · Cited by 8
“An ADXL335 three-axis accelerometer [40] was then mounted on the top edge of the bearing housing using two M3 bolts, guaranteeing its stability throughout the test operation.”
MethodSimulation and Measurement of Strain Waveform under Vibration Using Fiber Bragg Gratings
Смайлов, Н., Koshkinbayev, S., Aidana, B., et al. (2024) · Sensors · doi:10.3390/s24196194 · Cited by 8
Self-powered Fault Diagnosis Using Vibration Energy Harvesting and Machine Learning
Sato, T., Funato, M., Imai, K., et al. (2022) · Sensors and Materials · doi:10.18494/sam3907 · Cited by 8
The Random Vibrations of the Active Body of the Cultivators
Cârdei, P., Constantin, N., Muraru, V. M., et al. (2023) · Agriculture · doi:10.3390/agriculture13081565 · Cited by 8
Ninawe, S., & Deshmukh, R. B. (2024) · Journal of Vibration and Control · doi:10.1177/10775463241262117 · Cited by 7
“These methods consider a machine ’ s operation under steady-state conditions, which may result in inaccurate data because mechanical failures in rotary machinery systems can be non-stationary and produce transient impulses (Malla and Panigrahi, 2019; Mohd Ghazali and Rahiman, 2021).”
Mehamud, I., Björling, M., Marklund, P., et al. (2024) · Advanced Sustainable Systems · doi:10.1002/adsu.202400575 · Cited by 7
Liu, H., Sun, Y., Chen, D., et al. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3527622 · Cited by 7
“The improvements based on classical K-SVD methods [31], [32], [33], [34], [35], [36], [37], [38], [39], [40] are primarily aimed at processing rotating signals, often removing high-frequency spectral components [2], [29], [53].”
Chi, C., Song, H., Cai, Q., et al. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3552845 · Cited by 7
“C HARACTERISTIC information in the operation of mechanical equipment is hidden in the vibration signal, and vibration analysis technology is commonly used in the structural safety monitoring of mechanical equipment and equipment fault diagnosis [1].”
Morgan, W. J., & Chu, H.-Y. (2021) · Applied Sciences · doi:10.3390/app12010196 · Cited by 9
Diagnosis of rotating machine defects by vibration analysis
Bouaouiche, K., Menasria, Y., & Khalfa, D. (2023) · ACTA IMEKO · doi:10.21014/actaimeko.v12i1.1438 · Cited by 10
Bearing Fault Identification for High-Speed Wind Turbines using CNN
Hamid, M. A., Ibrahim, R. A., Abdel-Geliel, M., et al. (2023) · doi:10.1109/icsmartgrid58556.2023.10171018 · Cited by 7
“Feature extraction/signal processing stages can be divided into time, frequency, and time-frequency domain analysis [26].”
BackgroundIncremental transfer learning for robot drilling state monitoring under multiple working conditions
Shi, J., Zhao, X., Tao, B., et al. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02432-0 · Cited by 7
Vibration-based delamination evaluation in GFRP composite plates using random forest
Saleh, O. N., Jaber, A. A., & Hussein, R. M. (2025) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-025-00804-4 · Cited by 6
“Damage in the mentioned type of structures generally causes changes in some of the structural dynamics and modal characteristics, and that is how failure can be detected by measuring these changes (Mohd Ghazali and Rahiman 2021).”
Wu, G., Huang, Z., Long, Z., et al. (2025) · ISA Transactions · doi:10.1016/j.isatra.2025.05.035 · Cited by 6
Fan, H., Gao, J., Cao, X., & Zhang, X. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3618944 · Cited by 6
“However, under low rotational speed and variable load conditions, motor fault features are difficult to extract accurately, limiting the diagnostic performance of traditional methods [4].”
Chen, X., Wang, C., Qiang, X., Fan, H., & Pan, L. (2025) · Applied Mathematical Modelling · doi:10.1016/j.apm.2025.116511 · Cited by 8
A wearable augmented reality system for intelligent maintenance of mechanical equipment
Xu, H., Liu, X., Wu, X. Y., Li, J., & Li, Y. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16750-x · Cited by 8
“…followed by comprehensive operational details, including the date of data acquisition, alarm levels indicating equipment anomalies, maintenance guidance applicable during malfunctions, sampling frequency, and key time domain indicators [42–46] for each measurement point (as summarized in Table 2).”
A dual fiber grating acceleration sensor based on elastic ring structure of “8” shape
Li, K., Zhao, Q., Du, J., et al. (2024) · Optical Fiber Technology · doi:10.1016/j.yofte.2024.104037 · Cited by 6
Anomaly Detection Method for Rocket Engines Based on Convex Optimized Information Fusion
Sun, H., Cheng, Y., Jiang, B., Lü, F., & Wang, N. (2024) · Sensors · doi:10.3390/s24020415 · Cited by 7
Predictive Analysis of Induction Motor using Current, Vibration and Acoustic Signals
Babu, E., Francis, J., Thomas, E., et al. (2022) · International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC) · doi:10.1109/parc52418.2022.9726688 · Cited by 6
Le, T.-T.-H., Adiputra, A. A., Yun, J., & Kim, H. (2025) · IEEE Access · doi:10.1109/access.2025.3565812 · Cited by 9
“Industrial environments are characterized by their complexity and variability, factors such as background noise, varying operating conditions, and the presence of multiple types of machinery that contribute to the difficulty of identifying abnormal sound patterns [10], [11].”
Vibration Analysis for Diagnosis of Diesel Engines with Air Flow Sensor Failure
Helali, A., Belkacem, I., Abdellaoui, J., & Zegnani, A. (2025) · Technologies · doi:10.3390/technologies13090380 · Cited by 8
Karabacak, Y. E., & Özmen, N. G. (2022) · Konya Journal of Engineering Sciences · doi:10.36306/konjes.1049489 · Cited by 5
Velaga, S. K., Saurav, Ashwin, M., et al. (2023) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455423501845 · Cited by 5
Overview of Maintenance Management Strategies in the Industry
Adaramola, B., Kayode, J. F., Monye, S. I., & Afolalu, S. A. (2024) · International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) · doi:10.1109/seb4sdg60871.2024.10629938 · Cited by 5
“You should be aware that the cost of implementing this PdM strategy is higher than the cost of implementing the other strategies [36] v. Motor circuit analysis: Electronic signature analysis (ESA), which analyzes a motor's supply voltage and operating current, is used in motor circuit analysis to…”
MethodContextual Knowledge-Informed Deep Domain Generalization for Bearing Fault Diagnosis
Lundström, A., O’Nils, M., & Qureshi, F. Z. (2024) · IEEE Access · doi:10.1109/access.2024.3520624 · Cited by 6
“Because of this, methods ranging from physics-based [2] to machine learning-based [3] have been suggested and recently, deep learning (DL) has become prominent in developing solutions for fault detection, based on vibration data [4], [5], [6].”
Zhang, H., Gong, F., Miao, Y., Yan, B., Li, Q., & Park, G. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.113287 · Cited by 5
Machine Learning Motor Vibration Monitoring System with a Service Estimation Date
Ibrahim, S. Y., Ilyas, M. A., Li, Q., Khan, M. K. A. A., & Othman, M. B. (2023) · Advances in transdisciplinary engineering · doi:10.3233/atde230583 · Cited by 5
Lorenz, A., Siewertsen, B., Clemmensen, V. K., Petersen, J. B., Friederich, J., & Lazarova‐Molnar, S. (2022) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea54703.2022.10006127 · Cited by 4
Shao, Z., Mei, X., Liu, T., Li, J., & Tang, H. (2024) · Sensors · doi:10.3390/s24165416 · Cited by 5
Comparison of vibration emissions in electric and conventional cars
Cebulska, W., & Hadryś, D. (2025) · Silniki Spalinowe/Combustion Engines · doi:10.19206/ce-204690 · Cited by 3
“The higher the sampling rate, the more accurately the signal is recorded [5, 6, 11, 16].”
Muc, А., & Bielecka, A. (2025) · Energies · doi:10.3390/en18195140 · Cited by 3
A review of monitoring wear and lubrication state by triboelectrification
Yang, S., Xing, P., Sui, Y., et al. (2025) · Measurement Science and Technology · doi:10.1088/1361-6501/ae0751 · Cited by 3
Krishnendu, K. B., & Pradhan, P. M. (2025) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3645014 · Cited by 3
“Through the diagnosis of MVS such as displacement, acceleration, or velocity, bearing anomalies can be detected without physical disassembly of the equipment [4].”
Bilgin, G. (2026) · Sensors · doi:10.3390/s26072195 · Cited by 4
“The entropy gain during the transition from level 7 to 8 is only 8.3% of that observed during the transition from level 6 to 7 [67].”
InfluentialHybrid Vibration Sensor for Equipment Monitoring and Diagnostics
Васильевич, Б. И., Бочкарев, И. В., Khramshin, V. R., & Gasiyarov, V. R. (2024) · Sensors · doi:10.3390/s24113535 · Cited by 3
“…electric signals U ( ω 0 ) and U (2 ω 0 ) from, respectively, the outputs of selective amplifiers 9 and 10, were fed to the inputs of, respectively, quadrature detectors 12 and 11, whose synchronization inputs received synchronization voltages U C ( ω 0 ) and U C (2 ω 0 ) from generator 7.”
BackgroundMethodInfluentialThe Levenberg–Marquardt Procedure for Modeling Accelerometers Used in the Energy Industry
Tomczyk, K., Ostrowska, K., Sładek, J. A., et al. (2024) · Energies · doi:10.3390/en17236072 · Cited by 3
Estimating track geometry irregularities from in-service train accelerations using deep learning
Jin, Z., Zhang, W., Yin, Z., Zhang, N., & Geng, X. (2025) · Automation in Construction · doi:10.1016/j.autcon.2025.106114 · Cited by 5
Wang, S., Ma, T., Liang, X., Gao, S., & Han, Q. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500303 · Cited by 7
Hoang, N.-P., Nguyen, T.-D., Nguyen, T.-D., et al. (2025) · Processes · doi:10.3390/pr13061663 · Cited by 3
Hamrouni, C., & Alutaybi, A. (2025) · Sound&Vibration · doi:10.59400/sv2112 · Cited by 3
Vibroacoustic Signal-Based Diagnosis for Rotor Faults in Large Synchronous Machines - an Overview
Ibrahim, R., Tahan, A. S., Kedjar, B., Al‐Haddad, K., Zemouri, R. M., & Merkhouf, A. (2023) · International Conference on Renewable Energies for Developing Countries (REDEC) · doi:10.1109/redec58286.2023.10208168 · Cited by 4
“To address this issue, vibration analysis is often employed as a reliable method for achieving real-time machine monitoring, and there are numerous well-established signal processing techniques that can be used [5].”
BackgroundMethod
Metadata
- Authors
- Mohd Ghazali, M. H., & Rahiman, W.
- Affiliations
- Universiti Sains Malaysia (MY)
- Corresponding author
- Rahiman, Wan
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2021-01
- Volume
- 2021
- Issue
- 1
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W3200557187
- Cited by
- 249
- References
- 159
- Citations by year
- 2026: 60 · 2025: 83 · 2024: 61 · 2023: 25 · 2022: 19 · 2021: 1
- FWCI
- 3.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Funders
- Collaborative Research in Engineering, Science and Technology Centre (304/PELECT/6050424/C121)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Keywords
- vibration analysis, machine condition monitoring, fault diagnosis, vibration sensors, vibration signal acquisition, feature extraction, fault identification, artificial intelligence, deep learning, time-domain statistical features, unbalance, misalignment, wear, predictive maintenance, intelligent machines
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.