Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Open accessThe DOI matches its Crossref record; 164 of the 164 references it cites were found in a registry or an index; 18 of the 128 sources its claims cite were checked for support.
Abstract
Untimely machinery breakdown will incur significant losses, especially to the manufacturing company as it affects the production rates. During operation, machines generate vibrations and there are unwanted vibrations that will disrupt the machine system, which results in faults such as imbalance, wear, and misalignment. Thus, vibration analysis has become an effective method to monitor the health and performance of the machine.
Overview
CoChat Summary
TL;DR
This systematic review synthesizes vibration analysis for machine monitoring and diagnosis across data acquisition, feature extraction, and AI-based fault recognition. It reports that AI-based techniques account for about 57% of reviewed methods, with RMS, FFT, WT, and SVM among the most used, and highlights deep learning/deep transfer learning and noncontact sensors as future directions.
Key findings
- AI-based techniques contribute about 57% of the overall vibration analysis methods reviewed; SVM is the most widely used AI method, attributed to high classification accuracy and low computational time.
- The most applied methods are RMS in the time domain, FFT in the frequency domain, and WT in the time-frequency domain; almost 80% of previous studies applied feature extraction/signal processing techniques such as envelope analysis, STFT, WT, and HHT, with or without AI.
- Accelerometer remains the best sensor option for vibration analysis; computer-based analyzers with DSP/FPGA are nearly as good as conventional analyzers, and noncontact sensors/LDV are expected to be widely applied in the future due to flexibility and independence from mass-loading effects.
- Deep learning/DNN can automatically extract fault features from raw vibration signals, while traditional time-domain features such as RMS and crest factor remain relevant and their application with AI is expected to continue increasing. Cited studies report accuracies including 93.33% for crest factor + SVM gear fault diagnosis, 99.3% for STFT + NMF rolling bearing fault detection, 100% for CEEMDAN + PSO-LSSVM rolling bearing diagnosis, and 95% for decision tree + fuzzy logic spur gear fault diagnosis.
Methods
- A Systematic Literature Review (SLR) approach was employed to collect relevant primary studies and answer five research questions; selected papers were classified and analyzed through content analysis.
- Results were classified into survey, simulation, and experiment/real-time deployments; more than 100 articles were discussed, covering data acquisition instruments, feature extraction methods, and AI-based fault recognition.
- The review follows the three main vibration analysis steps: data acquisition, signal processing/feature extraction, and fault recognition; due to the wide range of techniques, only widely used ones are discussed.
Limitations
- The paper states that a review of all literature is impossible and some papers might be omitted; only widely used techniques are discussed.
- The paper states that most reported studies applied vibration analysis on one test rig or machine and in controlled environments, so excellent results cannot be guaranteed on other machines or in industrial settings; AI data-driven methods may also face generalization issues when entirely new datasets are used.
- The paper states that most existing methods assume Gaussian vibration signals, while industrial signals are often corrupted by non-Gaussian noise not widely considered; Digital Twin modeling remains challenging due to nonlinear dynamics and uncertainty in smart machines.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 9 Not valid · 101 Not checked · 57 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Kurtosis feature can provide the information regarding the non-Gaussianity or impulsiveness of the vibration signals [68,69].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 7.4. Kurtosis.
What the sources say
- Partly supportedcites [68] 68. P. H. Westfall, "Kurtosis as p," e American Statistician, vol. 68, no. 3, pp. 191-195, 2014. sourceExperimental — accuracy not yet measured
Section 3 (“How Data Look”; page unavailable) says sample kurtosis primarily reflects outliers, supporting its use as an indicator of extreme or impulsive observations. Section 4 compares kurtosis with that of a normal distribution, but the paper does not examine vibration signals or establish kurtosis as a measure of their non-Gaussianity. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [69] 69. J. Hebda-Sobkowicz, R. Zimroz, and A. Wyłomańska, "Se- lection of the informative frequency band in a bearing fault diagnosis in the presence of non-Gaussian noise-comparison of recently developed methods," Applied Sciences, vol. 10, no. 8, p. 2657, 2020. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“FFT is also unable to investigate the transient features efficiently in time and can predict the fault but cannot determine the severity of fault [3].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 8.1. FFT.
What the sources say
- Partly supportedcites [3] 3. S. Kumar, M. Lokesha, K. Kumar, and K. Srinivas, "Vibration based fault diagnosis techniques for rotating mechanical components: review paper," in Proceedings of the Interna- tional Conference on Advances in Manufacturing, Materials and Energy Engineering, pp. 1-6, Karnataka, India, June 2018. sourceExperimental — accuracy not yet measured
The Review (p. 3) says FFT can predict a gear fault but cannot determine its severity. The Review (p. 6) says wavelet analysis detects transient components efficiently and outperforms FFT power-spectrum analysis, but it does not specifically say FFT is unable to investigate transient features efficiently in time. (LLM, conf=0.85)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 9.2. WVD.
What the sources say
- Could not verifycites [93] 93. Y. Wei, Y. Li, M. Xu, and W. Huang, "A review of early fault diagnosis approaches and their applications in rotating machinery," Entropy, vol. 21, no. 4, p. 409, 2019. sourceExperimental — accuracy not yet measured
Section 2.1.2 discusses wavelet transforms, and Section 3.2 discusses their applications, but neither addresses WVD or its use for determining time-frequency structures. Searches for “WVD,” “Wigner Ville distribution,” and “cross-term interference” found no passage stating the claimed reason for avoiding direct use of WVD. (LLM, conf=0.72)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In terms of noise, most of the reported existing methods can effectively distinguish noise from vibration signals.”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 11. Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
In the paper
“e results showed that NN performed better for nonstationary signals in the time-frequency domain compared to the frequency domain.”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 10.2. NN.
What the sources say
- Not matchedcites [137] 137. M. R. Castelino, H. S. Kumar, P. P. Srinivasa, and G. S. Vijay, "Artificial neural network-based vibration signal analysis of rotary machines-case studies," in Proceedings of the Inter- national Conference on Emerging Trends in Engineering, pp. 211-218, Karnataka, India, July 2014.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
43 more claims
Create a free account to see all 182 claims and every source verdict.
- It may state two separate claims as one. 77
- Probably not a substantial claim. 95
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 5.3. Velocity Transducer.
“most velocity transducers are prone to reliability problems at operational temperatures that exceed 121 ° C”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 762
“to reliability problems at operational frequency of more than 121 ° C”
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 1×
“, Huang et al. [108] introduced the HHT in 1998 to determine the characteristics of stationary, nonstationary, and transient signals.”
BackgroundA review on genetic algorithm: past, present, and future
Katoch, S., Chauhan, S. S., & Kumar, V. (2021) · Multimedia Tools and Applications · doi:10.1007/s11042-020-10139-6 · Cited by 4,655 · cited 1×
“GA. GA, derived from a study of a biological system, can solve both constrained and unconstrained optimization problems based on a natural selection process [164, 165].”
BackgroundDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
A complete ensemble empirical mode decomposition with adaptive noise
Torres, M. E., Colominas, M. A., Schlotthauer, G., & Flandrin, P. (2011) · 2011 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2011.5947265 · Cited by 2,801 · cited 1×
“However, in the low-frequency region, the energy leakage and modal aliasing problems still exist. is what motivates Torres et al. [110] to propose the complete EEMD with adaptive noise (CEEMDAN) method, which can produce better modal frequency spectrum separation outputs.”
MethodZadeh, L. A. (1988) · Computer · doi:10.1109/2.53 · Cited by 1,824
Theory of communication. Part 1: The analysis of information
Gabor, D. (1946) · Journal of the Institution of Electrical Engineers - Part III: Radio and Communication Engineering · doi:10.1049/ji-3-2.1946.0074 · Cited by 1,795 · cited 1×
“STFT. STFTwas pioneered by Gabor back in 1946 in the communication field [117].”
BackgroundFedHealth: A Federated Transfer Learning Framework for Wearable Healthcare
Chen, Y., Qin, X., Wang, J., Yu, C., & Gao, W. (2020) · IEEE Intelligent Systems · doi:10.1109/mis.2020.2988604 · Cited by 1,005 · cited 1×
“Compared to the NN and SVM method, the DNN approach can adaptively learn the hierarchical representation from raw data through multiple nonlinear transformations and approximate complex nonlinear functions instead of extracting the fault feature manually [141].”
MethodFeng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998 · cited 5×
“HHT consists of empirical mode decomposition (EMD) of signals and Hilbert transform, and by combining these two methods, a Hilbert spectrum can be obtained, where the faults in a running machine can be diagnosed [92].”
BackgroundMethodInfluentialFEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879 · cited 2×
“Time-frequency domain A study on applying the CWT method in the feature extraction of mechanical vibration signals conducted by [101].”
MethodPeng, Z. K., Tse, P. W., & Chu, F. L. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.01.006 · Cited by 840 · cited 1×
“Peng et al. [111] introduced a better version of HHT that incorporated the WPT technique to decompose the vibration signal into a set of narrowband signals. proposed method was shown to have a better resolution in the time and frequency domain compared to the wavelet-based scalogram.”
MethodRANDALL, R. B., ANTONI, J., & CHOBSAARD, S. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1415 · Cited by 761 · cited 2×
“…and simplicity compared to the improved synchronous average (ISA), the cepstrum prewhitening (CPW), and the generalized synchronous average (GSA) [86] Used the envelope analysis to diagnose bearing faults squared envelope method is more suitable to analyze the cyclostationary signals compared to…”
BackgroundSAMANTA, B., & AL-BALUSHI, K. R. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1462 · Cited by 760 · cited 4×
“[63] Incorporated the RMS and kurtosis values in NN to diagnose the rolling element bearings fault +e proposed method can effectively diagnose the condition using only a few features of vibration data but the fault types and severity level cannot be determined [71] Applied the kurtosis and SVM method to diagnose rolle…”
BackgroundMethodInfluentialA roller bearing fault diagnosis method based on EMD energy entropy and ANN
Yu, Y., YuDejie, & Junsheng, C. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.11.002 · Cited by 559 · cited 1×
“[146] Applied the combination of EMD and NNmethods to diagnose the roller bearing fault +e proposed method can successfully diagnose roller bearing fault but has an end effect complication [147] Combined the WPT, GA, NN, and SVM methods to diagnose fault in diesel engine +e proposed method produced 100% classification…”
MethodDigital Twin for rotating machinery fault diagnosis in smart manufacturing
Wang, J., Ye, L., Gao, R. X., Li, C., & Zhang, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1552032 · Cited by 552 · cited 1×
“However, producing an effective and proper Digital Twin model remains a challenge due to the nonlinear dynamics, and uncertainty that occurs in the operating smart machines [175].”
BackgroundWavelet packet feature extraction for vibration monitoring
Yen, G. G., & Lin, K.-C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.847906 · Cited by 545
OPTIMISATION OF BEARING DIAGNOSTIC TECHNIQUES USING SIMULATED AND ACTUAL BEARING FAULT SIGNALS
HO, D., & RANDALL, R. B. (2000) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1304 · Cited by 531 · cited 1×
“Regarding bearing failure, the noise components make the envelope analysis difficult to determine the fault. introduction of the squared envelope analysis method has solved this problem, where a squared envelope can be computed as shown in [82].”
MethodKurtosis as Peakedness, 1905–2014. R.I.P.
Westfall, P. H. (2014) · The American Statistician · doi:10.1080/00031305.2014.917055 · Cited by 518
An international review of laser Doppler vibrometry: Making light work of vibration measurement
Rothberg, S. J., Allen, M. S., Castellini, P., Di Maio, D., Dirckx, J. J. J., Ewins, D. J., Halkon, B. J., Muyshondt, P., Paone, N., Ryan, T., et al. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2016.10.023 · Cited by 516 · cited 1×
“Currently, a higher power infrared (invisible) fiber laser is more popular in LDV compared to the He-Ne laser. introduction of this technology has fulfilled the goal of achieving long-range measurements without compromising the signal quality [54].”
MethodFault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Goyal, D., & Pabla, B. S. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-015-9145-0 · Cited by 508 · cited 8×
“It is usually used in measuring low-frequency vibration of less than 10 Hz, but it can also measure vibration up to 300 Hz [45].”
BackgroundMethodInfluentialGas Turbine Engineering Handbook
(2012) · Elsevier eBooks · doi:10.1016/c2009-0-64242-2 · Cited by 492
Rolling element bearing fault diagnosis using convolutional neural network and vibration image
Hoang, D.-T., & Kang, H.-J. (2019) · Cognitive Systems Research · doi:10.1016/j.cogsys.2018.03.002 · Cited by 450 · cited 1×
“Hoang and Kang [142] applied the CNN technique, which is a class of DNN that is most commonly applied for image analysis, to diagnose the rolling element bearing in rotary machines.”
MethodVibration analysis of rotating machinery using time–frequency analysis and wavelet techniques
Al-Badour, F., Sunar, M., & Cheded, L. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.01.017 · Cited by 353 · cited 1×
“Al-Badour et al. [98] employed the CWT and WPT in detecting faults in rotating machinery.”
MethodPractical Machinery Vibration Analysis and Predictive Maintenance
(2004) · Elsevier eBooks · doi:10.1016/b978-0-7506-6275-8.x5000-0 · Cited by 341
Staszewski, W. J., Worden, K., & Tomlinson, G. R. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1997.0102 · Cited by 329 · cited 1×
“Staszewski et al. [105] performed the fault detection analysis on the gearbox using the original WVD method and its weighted form, and they claimed that compared to the original WVD, its weighted form can reduce interference in the time-frequency domain, with a cost of a reduction in the frequency…”
MethodFault diagnosis of low speed bearing based on relevance vector machine and support vector machine
Widodo, A., Kim, E. Y., Son, J.-D., Yang, B.-S., Tan, A. C. C., Gu, D.-S., Choi, B.-K., & Mathew, J. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.09.033 · Cited by 324 · cited 1×
“An envelope analysis approach has also been applied by Widodo et al. [84] to preprocess the vibration signals of low-speed bearing, and thus, determining the bearing characteristic frequencies. method is then compared with the acoustic emission (AE) signal analysis, and during the fault recognition…”
MethodGearbox fault detection using Hilbert and wavelet packet transform
Fan, X., & Zuo, M. J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.08.032 · Cited by 323 · cited 1×
“Also, the proposed method produced a better result compared to FFT when the data are corrupted by noise [102] Combined the Hilbert transform and WPT to detect gearbox fault +e proposed method is capable of detecting early gar fault”
MethodBAYDAR, N., & BALL, A. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1338 · Cited by 323 · cited 1×
“Baydar and Ball [107] used the smooth pseudo WVD technique on acoustic and vibration signals to diagnose the gearbox condition, and the results showed that acoustic signals were more effective in early fault detection, compared to vibration signals.”
MethodRUBINI, R., & MENEGHETTI, U. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2000.1330 · Cited by 323 · cited 1×
“Rubini and Meneghetti [83] compared the envelope analysis with the wavelet transform (WT) method in diagnosing the incipient faults in ball bearings. results demonstrated that after 30 min (48000 cycles), the envelope analysis is no longer able to diagnose the presence of the fault whereas the…”
Intelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension
Yang, J., Zhang, Y., & Zhu, Y. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.10.005 · Cited by 275 · cited 1×
“[133] Used the SVM method to diagnose rolling bearing element fault based on the fractal dimensions SVM trained with 11 time domain statistical features and three fractal dimensions provides better results compared to the SVM trained with only fractal dimensions or with time domain statistical features [134] Applied t…”
MethodLeite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274 · cited 1×
“[85] to detect the bearing fault in induction motor, and the proposed method can efficiently detect fault without any information regarding the model.”
MethodForecasting Energy Use in Buildings Using Artificial Neural Networks: A Review
Runge, J., & Zmeureanu, R. (2019) · Energies · doi:10.3390/en12173254 · Cited by 268 · cited 1×
“NN is made up of a large number of richly interconnected artificial processing neurons called nodes, connected to each other in layers forming a network [136].”
BackgroundMicro hydro power: promising solution for off-grid renewable energy source
Hoq, T., Nawshad, U. A., Islam, N., et al. (2011) · Cited by 261
A Review of Early Fault Diagnosis Approaches and Their Applications in Rotating Machinery
Wei, Y., Li, Y., Xu, M., & Huang, W. (2019) · Entropy · doi:10.3390/e21040409 · Cited by 232 · cited 3×
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
BackgroundInfluentialAlShorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., & AlShorman, A. (2020) · Shock and Vibration · doi:10.1155/2020/8843759 · Cited by 215 · cited 1×
“One of the reasons why SVM is widely applied in vibration analysis for machine diagnosis is due to its compatibility with large and complex datasets such as data collected in the manufacturing industry [129].”
BackgroundA DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis
Betta, G., Liguori, C., Paolillo, A., & Pietrosanto, A. (2002) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2002.807987 · Cited by 211
Artificial neural networks and genetic algorithm for bearing fault detection
Samanta, B., Al-Balushi, K. R., & Al-Araimi, S. A. (2006) · Soft Computing · doi:10.1007/s00500-005-0481-0 · Cited by 182 · cited 2×
“[145] presented a combination of ANN and SVM with GA for bearing fault detection.”
MethodFault diagnosis of angle grinders and electric impact drills using acoustic signals
Glowacz, A., Tadeusiewicz, R., Legutko, S., Caesarendra, W., Irfan, M., Liu, H., Brumercik, F., Gutten, M., Sulowicz, M., Antonino Daviu, J. A., et al. (2021) · Applied Acoustics · doi:10.1016/j.apacoust.2021.108070 · Cited by 178 · cited 1×
“Real-time machine monitoring can be achieved using vibration analysis and there are many well-developed signal processing techniques that can be applied. limitations of vibration analysis are noise contamination and proper mounting position of the vibration sensors [6].”
Igba, J., Alemzadeh, K., Durugbo, C., & Eiriksson, E. T. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.01.006 · Cited by 177 · cited 4×
“Igba et al. [39] installed the piezoelectric accelerometer sensor on the operational turbines to obtain the vibration data for time domain analysis.”
BackgroundMethodInfluentialAbboud, D., Antoni, J., Sieg-Zieba, S., & Eltabach, M. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.06.033 · Cited by 177 · cited 4×
“…that do not require bandpass filtering but applying both approaches without prior knowledge can lead to false result in detecting bearing faults [81] Applied the envelope analysis to diagnose faults in rotating machines under variable speed conditions Squared envelope method is an optimal…”
BackgroundInfluentialCondition based maintenance of machine tools—A review
Goyal, D., & Pabla, B. S. (2015) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2015.05.004 · Cited by 175 · cited 6×
“It also requires electronic integration in order to obtain velocity and displacement data because it is AC coupled [37].”
BackgroundMethodInfluentialChen, W., Li, J., Wang, Q., & Han, K. (2021) · Measurement · doi:10.1016/j.measurement.2020.108901 · Cited by 173 · cited 1×
“Chen et al. [114] proposed a combination of CEEMDAN and particle swarm optimization least squares support vector machine (PSO-LSSVM) to improve the diagnosis accuracy of rolling bearings. diagnosis accuracy of several rolling bearings fault types was improved by this method to 100%.”
MethodXing, S., Lei, Y., Wang, S., & Jia, F. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972461 · Cited by 170
Giantomassi, A., Ferracuti, F., Iarlori, S., Ippoliti, G., & Longhi, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2370936 · Cited by 168 · cited 1×
“…the condition of the automatic packaging machine and found that WT is able to determine the variation of vibration frequency content within the machine cycle. advantage of CWT is that it has a finer scale parameter compared to the DWT method, but in terms of computational, DWT is more efficient [97].”
MethodVentilation Diagnosis of Angle Grinder Using Thermal Imaging
Glowacz, A. (2021) · Sensors · doi:10.3390/s21082853 · Cited by 165 · cited 1×
“However, it is very challenging to properly capture the acoustic signals due to several factors such as environmental conditions, different parameter of recording software, and reflected acoustic signals [5].”
BackgroundBartelmus, W., Chaari, F., Zimroz, R., & Haddar, M. (2010) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2010.03.002 · Cited by 160 · cited 1×
“[60] applied the RMS values as a diagnostic feature to diagnose gearbox fault, where the models of the behavior of gearboxes that correlate the transmission error function and load variation are presented.”
MethodStatistical Spectral Analysis for Fault Diagnosis of Rotating Machines
Ciabattoni, L., Ferracuti, F., Freddi, A., & Monteriu, A. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2762623 · Cited by 160 · cited 1×
“[89] proposed a novel statistical spectrum analysis (SSA) where the spectral content of vibration signals was calculated using FFT and then transformed into statistical spectral images in diagnosing faults of rotating machines.”
MethodChen, F., Tang, B., & Chen, R. (2012) · Measurement · doi:10.1016/j.measurement.2012.06.009 · Cited by 157 · cited 2×
“For the fuzzy control, the GA can be used to tune the associated membership function parameters as well as generating the fuzzy rules. applications of GA can also be observed in Table 6 [168–170]. advantages and disadvantages of each fault recognition method can be seen in Table 10.”
MethodHajnayeb, A., Ghasemloonia, A., Khadem, S. E., & Moradi, M. H. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.02.065 · Cited by 153 · cited 1×
“Hajnayeb et al. [167] claimed that removing some features from the input features will result in quicker and more accurate diagnosis systems.”
BackgroundGao, H., Liang, L., Chen, X., & Xu, G. (2014) · Chinese Journal of Mechanical Engineering · doi:10.3901/cjme.2014.1103.166 · Cited by 146 · cited 2×
“STFT method has also been applied in fault diagnosis of hydroelectric machine [120], induction motor [121], and rolling element bearing [122] (refer to Table 6).”
MethodBurriel-Valencia, J., Puche-Panadero, R., Martinez-Roman, J., Sapena-Bano, A., & Pineda-Sanchez, M. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2647458 · Cited by 144 · cited 1×
“To avoid cross-term effects, Burriel-Valencia et al. [119] implemented the STFT method for fault diagnosis of induction machines, where the spectrums in the frequency domain in the relevant frequency band are filtered. proposed method greatly reduced the computing time and memory resources.”
MethodFuzzy logic applied to opinion mining: A review
Serrano-Guerrero, J., Romero, F. P., & Olivas, J. A. (2021) · Knowledge-Based Systems · doi:10.1016/j.knosys.2021.107018 · Cited by 141 · cited 1×
“Compared to conventional logic, fuzzy logic aims at modeling the imprecise modes of reasoning to make rational decisions in an environment of uncertainty and imprecision [153, 154].”
BackgroundSemi-supervised gear fault diagnosis using raw vibration signal based on deep learning
Li, X., Li, J., Qu, Y., & He, D. (2019) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2019.04.018 · Cited by 137
Vibration-based fault diagnosis of pump using fuzzy technique
Wang, J., & Hu, H. (2005) · Measurement · doi:10.1016/j.measurement.2005.07.015 · Cited by 136 · cited 1×
“[160] Proposed the fuzzy logic method to diagnose the operation of rotating machines +e proposedmethod can easily diagnose the operational status of the rotating system [161] Applied the fuzzy logic method to monitor and diagnose the condition of the pump +e proposed method can successfully identify and classify the f…”
MethodSait, A. S., & Sharaf-Eldeen, Y. I. (2011) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-1-4419-9428-8_25 · Cited by 132 · cited 1×
“Aherwar [14] Discussed a variety of vibration analysis approaches in diagnosing the rotating machinery including the AI methods No discussion on the data acquisition system and the review was conducted in 2012; thus, it lacks the latest AI methods such as deep learning Sait and SharafEldeen [15] Presented a review of…”
MethodA new hybrid deep signal processing approach for bearing fault diagnosis using vibration signals
He, M., & He, D. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.12.088 · Cited by 127 · cited 1×
“…signal as the input It was found that CNN trained with a higher number of kernels in the first layer produced slightly better performance [151] Proposed a hybrid deep signal processing method to diagnose bearing faults in the machine, where the signal processing, feature extraction, and…”
MethodTabrizi, A. A., Garibaldi, L., Fasana, A., & Marchesiello, S. (2014) · Meccanica · doi:10.1007/s11012-014-9968-z · Cited by 119 · cited 1×
“Tabrizi et al. [131] combined the SVM with the WPT (for signal preprocessing) and EEMD (for feature extraction) methods to detect small defects on roller bearings under different operating conditions.”
MethodVibration Analysis Techniques for Rotating Machinery and its effect on Bearing Faults
Adamsab, K., & Shivakumar, S. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.02.036 · Cited by 119 · cited 1×
“Khadersab and Shivakumar [40] used the piezoelectric accelerometer to obtain vibration data from rotating machinery to analyze the bearing faults.”
MethodDou, D., & Shishuai, Z. (2016) · Applied Soft Computing · doi:10.1016/j.asoc.2016.05.015 · Cited by 118 · cited 1×
“AI can be defined as any task performed by a program or a machine that is difficult enough that it requires intelligence to accomplish it [127].”
BackgroundMachine Fault Signature Analysis
Jayaswal, P., Wadhwani, A. K., & Mulchandani, K. B. (2008) · International Journal of Rotating Machinery · doi:10.1155/2008/583982 · Cited by 111 · cited 1×
“To obtain a diagnostic system with excellent sensitivity, the rules and membership functions can be tuned [155].”
BackgroundDeb Majumder, B., Roy, J. K., & Padhee, S. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2882239 · Cited by 104
Peeters, C., Guillaume, P., & Helsen, J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.12.036 · Cited by 104 · cited 2×
“…and NN method to detect and diagnose gear fault NN can diagnose gear faults with high accuracy, provided that proper measured data are used [79] Used two cepstrum analysis approaches, namely, automated cepstrum editing procedure (ACEP) and cepstrum prewhitening (CPW) to detect bearing…”
BackgroundMethodAn investigation on gearbox fault detection using vibration analysis techniques: A review
Aherwar, A. (2012) · Australian Journal of Mechanical Engineering · doi:10.7158/m11-830.2012.10.2 · Cited by 101 · cited 1×
“Aherwar [14] Discussed a variety of vibration analysis approaches in diagnosing the rotating machinery including the AI methods No discussion on the data acquisition system and the review was conducted in 2012; thus, it lacks the latest AI methods such as deep learning Sait and SharafEldeen [15] Presented a review of…”
MethodVibration Analysis & Condition Monitoring for Rotating Machines: A Review
Vishwakarma, M., Purohit, R., Harshlata, V., & Rajput, P. (2017) · Materials Today: Proceedings · doi:10.1016/j.matpr.2017.02.140 · Cited by 100 · cited 3×
“In frequency domain analysis, the amplitude is plotted against frequency and compared to the time domain, and the detection of the resonant frequency component is easier. is one of the reasons why frequency domain methods are favorable in detecting faults in the machine [59].”
BackgroundMethodShangguan, D., Chen, L., & Ding, J. (2020) · Symmetry · doi:10.3390/sym12081307 · Cited by 94 · cited 1×
“According to [173, 174], the Digital Twin model can map various characteristics of the physical machine into the virtual world to produce a digital replica of the machine that is transferable, detachable, modifiable, reproducible, repeatable, and erasable.”
MethodA Morphological Hilbert-Huang Transform Technique for Bearing Fault Detection
Osman, S., & Wang, W. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2598019 · Cited by 93
Ertunç, H. M., Ocak, H., & Aliustaoğlu, C. (2012) · Neural Computing and Applications · doi:10.1007/s00521-012-0912-7 · Cited by 89
Fan, W., Zhou, Q., Li, J., & Zhu, Z. (2018) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2720177 · Cited by 86 · cited 1×
“[101] Applied a denoising method based on WT to diagnose rolling bearing and gearbox +e proposed method is more effective and has more advantages compared to Donoho’s soft-thresholding denoising method [103] Proposed an orthonomal DWT (ODWT) method to monitor and diagnose bearing faults at an early stage +e proposed m…”
MethodSaucedo-Dorantes, J. J., Delgado-Prieto, M., Ortega-Redondo, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J. (2016) · Shock and Vibration · doi:10.1155/2016/5467643 · Cited by 80 · cited 2×
“According to Saucedo-Dorantes et al. [8], the percentage of fault diagnosis techniques conducted with the means of vibration analysis exceeds 82%.”
MethodFibre optic displacement sensor for the measurement of amplitude and frequency of vibration
Binu, S., Mahadevan Pillai, V. P., & Chandrasekaran, N. (2007) · Optics & Laser Technology · doi:10.1016/j.optlastec.2006.12.008 · Cited by 78 · cited 1×
“…(FODS) for industrial applications that is immune to electromagnetic interference. capability of a fiber optic displacement sensor in capturing the amplitude and frequency of vibration was studied by Binu et al. [51], and based on the results, this sensor can solve many sensing problems in aircraft.”
BackgroundClimente-Alarcon, V., Antonino-Daviu, J. A., Riera-Guasp, M., Puche-Panadero, R., & Escobar, L. (2012) · Electric Power Systems Research · doi:10.1016/j.epsr.2012.05.001 · Cited by 78 · cited 2×
“It is a specific case of the Cohen class distributions which yields a time-frequency energy density computed by correlating the signal with a time and frequency translation of itself [104].”
MethodLi, H., Zhang, Y., & Zheng, H. (2009) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-009-0730-8 · Cited by 76 · cited 2×
“Other applications of cepstrum analysis can be discovered in Table 6 [78, 79].”
BackgroundResultKolar, D., Lisjak, D., Pająk, M., & Pavković, D. (2020) · Sensors · doi:10.3390/s20144017 · Cited by 75 · cited 1×
“…a basis for intelligent fault diagnosis of machines proposed method is able to achieve a high diagnosis accuracy even with new working conditions [150] Used the CNN method with 1D image of raw three-axis accelerometer signal as the input It was found that CNN trained with a higher number of…”
MethodWu, J.-D., & Hsu, C.-C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.02.026 · Cited by 74 · cited 2×
“Lasurt et al. [157] compared the performance of fuzzy logic with NN in fault diagnosis of electrical machines, and they claimed that fuzzy logic performs better in detecting different faults for a wide range of operating conditions, compared to NN. Wu and Hsu [158] combined the method of DWT and fuzzy logic to detect…”
MethodFault diagnostics of spur gear using decision tree and fuzzy classifier
Krishnakumari, A., Elayaperumal, A., Saravanan, M., & Arvindan, C. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9307-8 · Cited by 73 · cited 2×
“[62] in fault diagnostics of the spur gear.”
BackgroundMethodDalpiaz, G., & Rivola, A. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1996.0067 · Cited by 72 · cited 3×
“Dalpiaz and Rivola [94] applied the WT method in monitoring the condition of the automatic packaging machine and found that WT is able to determine the variation of vibration frequency content within the machine cycle. advantage of CWT is that it has a finer scale parameter compared to the DWT method, but in terms of c…”
MethodContreras-Medina, L. M., Romero-Troncoso, R. D. J., Cabal‐Yépez, E., Rangel‐Magdaleno, J., & Almaraz, J. R. M. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2021642 · Cited by 72
Huang, S., Wang, X., Li, C., & Kang, C. (2019) · Measurement · doi:10.1016/j.measurement.2019.01.026 · Cited by 69 · cited 13×
“+us, the ensemble EMD (EEMD) method was introduced to overcome the limitation of EMD by introducing Gaussian white noise to the EMD [92, 109].”
MethodInfluentialZou, J., & Chen, J. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.07.002 · Cited by 65 · cited 1×
“According to Zou and Chen [96], the WT technique is highly sensitive to stiffness variation compared to WVD.”
MethodHebda-Sobkowicz, J., Zimroz, R., & Wyłomańska, A. (2020) · Applied Sciences · doi:10.3390/app10082657 · Cited by 65 · cited 1×
“Kurtosis feature can provide the information regarding the non-Gaussianity or impulsiveness of the vibration signals [68, 69].”
BackgroundMachinery Diagnosis Based on Wavelet Packets
Liu, B., Ling, S.-F., & Meng, Q. (1997) · Journal of Vibration and Control · doi:10.1177/107754639700300102 · Cited by 64
A LabVIEW based data acquisition system for vibration monitoring and analysis
Gani, A., & Salami, M. J. E. (2003) · Student Conference on Research and Development · doi:10.1109/scored.2002.1033055 · Cited by 64
Ameid, T., Menacer, A., Talhaoui, H., & Harzelli, I. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0143-2 · Cited by 58 · cited 2×
“Other applications of FFTcan also be seen in Table 6 [23, 73].”
BackgroundResultTransfer Learning Strategies for Deep Learning-based PHM Algorithms
Yang, F., Zhang, W., Tao, L., & Ma, J. (2020) · Applied Sciences · doi:10.3390/app10072361 · Cited by 53 · cited 1×
“…obtained when solving a problem and apply it to different but related problems so that the amount of data collection and training costs can be reduced [144]. proposed method is robust, and there is no requirement for further training when supplied with new datasets from different working conditions.”
BackgroundRangel-Magdaleno, J., Peregrina-Barreto, H., Ramirez-Cortes, J., Morales-Caporal, R., & Cruz-Vega, I. (2016) · Shock and Vibration · doi:10.1155/2016/3530464 · Cited by 48 · cited 1×
“[99] applied the DWTmethod to detect the incipient broken bar in the induction motor, and the detection accuracies achieved are 96.”
MethodWu, C., Chen, T., Jiang, R., Ning, L., & Jiang, Z. (2017) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-015-1070-4 · Cited by 45 · cited 1×
“A classification tree kernel-based SVM has also been employed together with CWT to identify bearing faults, and this combination proves to be a promising method and superior to other SVM methods with common kernels in diagnosing the rolling element bearing fault [132].”
MethodSelf-organization of nodes in mobile ad hoc networks using evolutionary games and genetic algorithms
Kusyk, J., Sahin, C. S., Umit Uyar, M., Urrea, E., & Gundry, S. (2011) · Journal of Advanced Research · doi:10.1016/j.jare.2011.04.006 · Cited by 45 · cited 1×
“GA. GA, derived from a study of a biological system, can solve both constrained and unconstrained optimization problems based on a natural selection process [164, 165].”
BackgroundMartins, D. H. C. D. S. S., Pestana-Viana, D., Lima, A. A. D., Pinto, M. F., Tarrataca, L. D. T. J., Silva, F. L. E., Gutiérrez, R. H. R., Prego, T. D. M., Monteiro, U. A. B. V., & Haddad, D. B. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06873-2 · Cited by 44
Application of artificial neural networks for response surface modelling in HPLC method development
Korany, M. A., Mahgoub, H., Fahmy, O. T., & Maher, H. M. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.04.001 · Cited by 38 · cited 1×
“+e presence of hidden layers gives the NN an ability to explain nonlinear systems, and the higher the number of hidden layers, the deeper the NN [139].”
BackgroundRolling Bearing Diagnosing Method Based on Time Domain Analysis and Adaptive FuzzyC-Means Clustering
Fu, S., Liu, K., Xu, Y., & Liu, Y. (2016) · Shock and Vibration · doi:10.1155/2016/9412787 · Cited by 38
Vibration Monitoring of Rotating Machines Using MEMS Accelerometer
Bikash Chaudhury, S., Sengupta, M., & Mukherjee, K. (2014) · International Journal of Scientific Engineering and Research · doi:10.70729/j2013358 · Cited by 38 · cited 3×
“MEMS accelerometer usually consists of movable proof mass with plates, supported by a mechanical suspension system to the frame [41].”
BackgroundMethodInfluentialFeature‐based fault diagnosis system of induction motors using vibration signal
Han, T., Yang, B., & Yin, Z. (2007) · Journal of Quality in Maintenance Engineering · doi:10.1108/13552510710753069 · Cited by 37 · cited 1×
“Han et al. [166] used the GA in the process of diagnosing the induction motor and found that GA helps the diagnosis system to perform better by choosing critical features and optimizing the network structure.”
MethodA summary of vibration analysis techniques for fault detection and diagnosis in bearing
Boudiaf, A., Abederrazek, D., Bendjma, H., Balaska, A., & Dahane, A. (2016) · International Conference on Modelling, Identification and Control · doi:10.1109/icmic.2016.7804187 · Cited by 37 · cited 1×
“[13] Presented the vibration analysis techniques in terms of their capabilities, advantages, and disadvantages in monitoring rolling element bearings Only discussed four types of vibration analysis techniques”
BackgroundRanjan, R., Ghosh, S. K., & Kumar, M. (2020) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/0954408920910290 · Cited by 37 · cited 1×
“Several available diagnosis methods have been applied over the years including oil analysis, vibration signal analysis, particle analysis, corrosion monitoring, acoustic signal analysis, and wear debris analysis [3, 4].”
MethodThanagasundram, S., & Schlindwein, F. S. (2006) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/09544062c07405 · Cited by 36
Rangel-Magdaleno, J. D. J., Romero-Troncoso, R. D. J., Osornio-Rios, R. A., Cabal-Yepez, E., & Dominguez-Gonzalez, A. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2047130 · Cited by 36 · cited 1×
“[27] has conducted a vibration analysis on the CNC machine using an FPGA device.”
MethodWu, T. Y., Chung, Y. L., & Liu, C. H. (2010) · Journal of Vibration and Acoustics · doi:10.1115/1.4000782 · Cited by 34 · cited 1×
“[112] employed the HHT approach in diagnosing the looseness faults of rotating machinery, and the proposed technique is successful in determining the faults at different components of the machine.”
MethodGear fault diagnosis using Autogram analysis
Afia, A., Rahmoune, C., & Benazzouz, D. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018812534 · Cited by 34 · cited 1×
“become nondominant in the spectrum, which makes the machine diagnosis and monitoring process more difficult [171, 172].”
BackgroundA multi-application FFT analyzer based on a DSP architecture
Betta, G., Liguori, C., & Pietrosanto, A. (2001) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.930461 · Cited by 33
DIRECTIONAL WIGNER DISTRIBUTION FOR ORDER ANALYSIS IN ROTATING/RECIPROCATING MACHINES
Han, Y.-S., & Lee, C. (1999) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1998.1202 · Cited by 32 · cited 1×
“Directional Wigner distribution (dWD) was specifically developed for transient complex-valued signal analysis and applied in rotating or reciprocating machines by [106].”
MethodArchitecture Exploration for a High-Performance and Low-Power Wireless Vibration Analyzer
Shahzad, K., Cheng, P., & Oelmann, B. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2226238 · Cited by 32 · cited 3×
“To overcome these limitations, dedicated hardware such as Digital Signal Processor (DSP) or Field Programmable Gate Array (FPGA) was used alongside a personal computer and sensor for user control and result display [18].”
BackgroundMethodInfluentialOnline fault diagnosis of large electrical machines using vibration signal-a review
Sadeghi, I., Ehya, H., Faiz, J., et al. (2017) · doi:10.1109/optim.2017.7975013 · Cited by 32 · cited 1×
“[16] Discussed on the fault diagnosis in large electrical machines using vibration signals Most of the vibration analysis techniques are not discussed in this article Shock and Vibration 3”
BackgroundA normalized Hilbert-Huang transform technique for bearing fault detection
Osman, S., & Wang, W. (2016) · Journal of Vibration and Control · doi:10.1177/1077546314548909 · Cited by 31 · cited 1×
“Osman and Wang [113] proposed a normalized HHT (NHHT) technique to tackle the problem of selecting the appropriate distinctive IMF components, especially for bearing health condition monitoring.”
MethodVibration Analysis in Turbomachines Using Machine Learning Techniques
Pinheiro, A. A., Brandao, I. M., & Da Costa, C. (2019) · European Journal of Engineering Research and Science · doi:10.24018/ejers.2019.4.2.1128 · Cited by 31 · cited 2×
“…from both classes that are closer to the hyper-plane and influence the position and orientation of the hyperplane are called support vectors. learning and test data for the SVM are obtained from the feature extraction process and after training the SVM algorithm, the SVM matrix was obtained [128].”
MethodNowicki, J., Hebda-Sobkowicz, J., Zimroz, R., & Wyłomańska, A. (2021) · Applied Acoustics · doi:10.1016/j.apacoust.2021.107974 · Cited by 31 · cited 1×
“, some fault signatures are often covered by the machine natural frequencies and submerged by high non-Gaussian noise, and as a result, the faulty frequencies Shock and Vibration become nondominant in the spectrum, which makes the machine diagnosis and monitoring process more difficult [171, 172].”
BackgroundRodríguez-Donate, C., Romero-Troncoso, R. D. J., García-Pérez, A., et al. (2008) · International Symposium on Industrial Embedded Systems · doi:10.1109/sies.2008.4577701 · Cited by 31 · cited 1×
“Rodriguez-Donate et al. [28] developed an online monitoring system for the induction motor with the implementation of FPGA, and they found that the FPGA-based system has better processing speed compared to DSP and all the peripheral digital structures and processing unit can be included in a single…”
MethodCondition monitoring of low-speed bearings — a review
Kim, Y. H., Tan, A. C. C., & Kosse, V (2008) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2008.11464558 · Cited by 30 · cited 2×
“A combination of time domain signal analysis and FFT is normally associated with diagnosing the low-speed machine to produce more accurate results but the major concern is its reliance on the magnitude of the fault having an effect on the carrier frequency [11].”
BackgroundLasurt, I., Stronach, A. F., & Penman, J. (2002) · PeachFuzz 2000. 19th International Conference of the North American Fuzzy Information Processing Society - NAFIPS (Cat. No.00TH8500) · doi:10.1109/nafips.2000.877411 · Cited by 30 · cited 1×
“Lasurt et al. [157] compared the performance of fuzzy logic with NN in fault diagnosis of electrical machines, and they claimed that fuzzy logic performs better in detecting different faults for a wide range of operating conditions, compared to NN. Wu and Hsu [158] combined the method of DWT and…”
MethodA Comparative Study of Laser Doppler Vibrometers for Vibration Measurements on Pavement Materials
Hasheminejad, N., Vuye, C., Van den bergh, W., Dirckx, J., & Vanlanduit, S. (2018) · Infrastructures · doi:10.3390/infrastructures3040047 · Cited by 30 · cited 1×
“…optical measurement instrument that can be applied to determine the vibration velocities of any points on the surface of a particular machine [52, 53]. working mechanism of LDV is based on the laser Doppler concept where a frequency-modulated coherent laser beam is reflected from a vibrating…”
BackgroundDetecting faults in rotating machines
Kovaleski, J. L., Susin, A. A., Negreiros, M., & Marçal, R. F. M. (2000) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/5289.887456 · Cited by 30
A PC-based vibration analyzer for condition monitoring of process machinery
Ansari, S. A., & Baig, R. (1998) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.744177 · Cited by 29 · cited 4×
“…and SVM method to diagnose roller bearing fault accuracy of the proposed method is 93.75% and can be applied even with a limited number of samples [23] Used the FFTand PSD methods to monitor the condition of the machine A PC-based vibration analyzer, incorporating the proposed method was…”
BackgroundMethodInfluentialVibration based Fault Diagnosis Techniques for Rotating Mechanical Components: Review Paper
Kumar, S., Lokesha, M., Kumar, K., & Srinivas, K. R. (2018) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/376/1/012109 · Cited by 29 · cited 5×
“Several available diagnosis methods have been applied over the years including oil analysis, vibration signal analysis, particle analysis, corrosion monitoring, acoustic signal analysis, and wear debris analysis [3, 4].”
BackgroundMethodInfluentialRobust wind turbine gearbox fault detection
Sheldon, J., Mott, G., Lee, H., & Watson, M. (2014) · Wind Energy · doi:10.1002/we.1567 · Cited by 28 · cited 1×
“Sheldon et al. [61] used the RMS feature in diagnosing wind turbine gearbox and stated that applying the RMS feature is not recommended in detecting early stages of bearing failure.”
MethodQian, W., Li, S., Wang, J., Xin, Y., & Ma, H. (2018) · 2018 Prognostics and System Health Management Conference (PHM-Chongqing) · doi:10.1109/phm-chongqing.2018.00180 · Cited by 28 · cited 1×
“A combination of transfer learning and DNN has been employed by Qian et al. [143] in diagnosing the rotating machines under different working conditions.”
MethodVibration-based gearbox fault diagnosis using deep neural networks
Chen, Z., Chen, X., Li, C., Sánchez, R., & Qin, H. (2017) · Journal of Vibroengineering · doi:10.21595/jve.2016.17267 · Cited by 28
Vibration analysis in reciprocating compressors
Kacani, V. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/232/1/012016 · Cited by 28 · cited 1×
“A velocity transducer was applied by Rossi [48] to measure the frame vibration of compressor, which usually comprises of frequencies below 10 Hz.”
MethodLoughlin, P. J., & Bernard, G. D. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1997.0096 · Cited by 25 · cited 1×
“A fault that is able to change the vibration signature significantly over a short period of time can be determined by this method [88].”
MethodGangsar, P., & Tiwari, R. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9893-4 · Cited by 25 · cited 1×
“Several statistical parameters are usually extracted from the time domain signal so that the most significant parameter, which can effectively differentiate between healthy and defective machine vibration signals, can be chosen [56].”
BackgroundContreras-Medina, L. M., Romero-Troncoso, R. D. J., Almaraz, J. R. M., & Rodríguez-Donate, C. (2008) · IEEE International Symposium on Industrial Embedded Systems (SIES) · doi:10.1109/sies.2008.4577705 · Cited by 24 · cited 1×
“Contreras-Medina et al. [42] used a low-cost MEMS accelerometer in detecting machinery failures.”
MethodMollazade, K., Ahmadi, H., Omid, M., & Alimardani, R. (2008) · Zenodo · doi:10.5281/zenodo.1055694 · Cited by 23
Banerjee, T. P., Das, S., Roychoudhury, J., et al. (2010) · Advances in intelligent and soft computing · doi:10.1007/978-3-642-13161-5_28 · Cited by 22 · cited 2×
“+e STFTmethod has also been applied in fault diagnosis of hydroelectric machine [120], induction motor [121], and rolling element bearing [122] (refer to Table 6).”
BackgroundMethodSupport vector classification for fault diagnostics of an electrical machine
Poyhonen, S., Negrea, M., Arkkio, A., Hyotyniemi, H., & Koivo, H. (2003) · 6th International Conference on Signal Processing, 2002. · doi:10.1109/icosp.2002.1180133 · Cited by 20 · cited 2×
“[130] implemented the SVM technique to diagnose faults in an electrical machine, and the results showed that the classification accuracy was high, except for the detection of eccentric rotors.”
BackgroundMethodFault diagnosis of Massey Ferguson gearbox using Power Spectral Density
Heidarbeigi, K., Ahmadi, H., & Omid, M. (2008) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2008.4799995 · Cited by 20 · cited 2×
“…to detect rolling bearing element fault proposed method is able to determine the fault types and severity and yields 99.3% accuracy, superior to NN [125] Applied the PSD method to diagnose Massey Ferguson gearbox proposed method can reliably and quickly diagnose gearbox fault [126] Used the PSD…”
BackgroundMethodInfluentialAsymmetric penalty sparse model based cepstrum analysis for bearing fault detections
Liu, Y., Jiang, Z., Haizhou, H., & Xiang, J. (2020) · Applied Acoustics · doi:10.1016/j.apacoust.2020.107288 · Cited by 20 · cited 1×
“Cepstrum analysis was developed in the 1960s and can be defined as the power spectrum of the logarithm of the power spectrum [74].”
MethodSalido, J. M. F., & Murakami, S. (2004) · Applied Soft Computing · doi:10.1016/j.asoc.2004.02.004 · Cited by 18 · cited 1×
“However, this is the only available alternative when collecting the fault data is not possible [156].”
BackgroundShrivastava, A., & Wadhwani, S. (2014) · International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2014) · doi:10.1109/icraie.2014.6909160 · Cited by 18 · cited 2×
“Shrivastava and Wadhwani [58] used statistical parameters such as peak, RMS, crest factor, and kurtosis to diagnose the rotating electrical machine.”
BackgroundMethodAiswarya, N., Suja Priyadharsini, S., & Moni, K. S. (2016) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2016.1264285 · Cited by 18 · cited 2×
“such as harmonics, sidebands, or echoes [66].”
MethodIslam, M. M. M., & Kim, J.-M. (2018) · Lecture notes in computer science · doi:10.1007/978-3-319-89656-4_12 · Cited by 18 · cited 1×
“…[147] Combined the WPT, GA, NN, and SVM methods to diagnose fault in diesel engine proposed method produced 100% classification accuracy [148] Proposed a CNN approach that makes use of cyclic spectrum maps (CSMs) of raw vibration signal to diagnose the motor bearing in the rotating…”
MethodImproving empirical mode decomposition for vibration signal analysis
Rezaee, M., & Osguei, A. T. (2016) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406216630004 · Cited by 16 · cited 2×
“…the HHT and FT methods to diagnose machine fault HHT outperforms FT, where FT can only differentiate characteristic frequency in low-frequency band [116] Proposed a new local mean parameter to improve the HHT method to detect gearbox fault Introducing the new parameter improves the HHTprocess and…”
MethodGear fault diagnosis based on SVM and multi-sensor information fusion
Chen, A. (2010) · Journal of Central South University(Science and Technology) · Cited by 15
Moosavian, A., Ahmadi, H., & Tabatabaeefar, A. (2012) · Journal of Vibroengineering · Cited by 14
A novel PVDF based high-Gn shock accelerometer
Wu, Z., Xian-Zhong, S., Jiang, Z., et al. (2005) · Journal of Physics Conference Series · doi:10.1088/1742-6596/13/1/025 · Cited by 13 · cited 1×
“Changes in the charge produced depend on this acceleration [35, 36].”
BackgroundGearbox Fault Diagnosis Using Power Spectral Analysis
Heydarzadeh, M., Madani, N., & Nourani, M. (2016) · IEEE International Workshop on Signal Processing Systems (SiPS) · doi:10.1109/sips.2016.50 · Cited by 13 · cited 2×
“…superior to NN [125] Applied the PSD method to diagnose Massey Ferguson gearbox proposed method can reliably and quickly diagnose gearbox fault [126] Used the PSD and SVM methods to diagnose gearbox faults proposed method achieved an accuracy of 98.82% and 97.16% for spur and helical gearbox…”
BackgroundMethodInfluentialA comparison of uniaxial and triaxial accelerometers for the assessment of physical activity in dogs
Cheung, K. W., Starling, M. J., & McGreevy, P. D. (2014) · Journal of Veterinary Behavior · doi:10.1016/j.jveb.2013.11.003 · Cited by 12 · cited 1×
“Compared to the uniaxial accelerometer, triaxial accelerometer has a higher memory capacity but much more expensive [34].”
BackgroundBi, F., & Liu, Y. (2016) · Transactions of Tianjin University · doi:10.1007/s12209-016-2675-1 · Cited by 12 · cited 1×
“…NN methods to diagnose the roller bearing fault proposed method can successfully diagnose roller bearing fault but has an end effect complication [147] Combined the WPT, GA, NN, and SVM methods to diagnose fault in diesel engine proposed method produced 100% classification accuracy [148] Proposed…”
MethodZhu, Y., Yan, Q., & Lu, J. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1795927 · Cited by 12 · cited 2×
“Further implementation of SVM in vibration analysis for machine diagnosis can be found in Table 6 [90, 133–135].”
MethodThe Practicalities of Menu Use: Improvisation in Screen-Based Activity
Luff, P., & Heath, C. (1993) · Journal of Intelligent Systems · doi:10.1515/jisys.1993.3.2-4.251 · Cited by 11
Liu, Q. (2007) · Proceedings of the CSEE · Cited by 9
Vibration analysis using wavelet transform and fuzzy logic for shaft misalignment
Umbrajkaar, A. M., & Krishnamoorthy, A. (2018) · Journal of Vibroengineering · doi:10.21595/jve.2018.19611 · Cited by 9 · cited 1×
“[160] Proposed the fuzzy logic method to diagnose the operation of rotating machines +e proposedmethod can easily diagnose the operational status of the rotating system [161] Applied the fuzzy logic method to monitor and diagnose the condition of the pump +e proposed method can successfully identify and classify the f…”
MethodA REVIEW OF VIBRATION MACHINE DIAGNOSTICS BY USING ARTIFICIAL INTELLIGENCE METHODS
Zurita, G., Sánchez, V., & Cabrera, D. (2016) · INVESTIGACION & DESARROLLO · doi:10.23881/idupbo.016.1-8i · Cited by 8
Automatic Classification of Rotating Machinery Defects Using Machine Learning (ML) Algorithms
Zoungrana, W.-B., Chehri, A., & Zimmermann, A. (2021) · Smart Innovation, Systems and Technologies · doi:10.1007/978-981-15-5784-2_16 · Cited by 8 · cited 1×
“+e machine’s condition can be determined by the vibration amplitude and frequency, as both can reveal the severity and source of the machine problem, respectively [9].”
BackgroundLabVIEW Based Implementation of Fuzzy Logic for Vibration Analysis to Identify Machinery Faults
Mukane, R. V., Gurav, N., Sondkar, S., & Fernandes, N. C. (2017) · International Conference on Computing Communication Control and automation · doi:10.1109/iccubea.2017.8463707 · Cited by 8 · cited 1×
“Mukane et al. [159] applied the FFT method for signal processing and fuzzy logic for fault recognition in identifying machinery faults.”
MethodDigital Systems Design Based on DSP Algorithms in FPGA for Fault Identification in Rotary Machines
Kashiwagi, M., da Costa, C., & Mathias, M. H. (2014) · Journal of Mechanics & Industry Research · doi:10.12966/jmir.03.01.2014 · Cited by 7
Boyce, M. P. (2012) · Gas Turbine Engineering Handbook · doi:10.1016/b978-0-12-383842-1.00020-2 · Cited by 7
A Low-Cost Real-Time Virtual Spectrum Analyzer
Bilski, P., & Winiecki, W. (2006) · Conference proceedings - IEEE Instrumentation/Measurement Technology Conference · doi:10.1109/imtc.2005.1604569 · Cited by 6
Ma, X., Li, M., Ye, L., Ma, X., Yu, K., Zhu, L., & Song, Y. (2019) · Integrated Ferroelectrics · doi:10.1080/10584587.2019.1592610 · Cited by 5 · cited 1×
“…optical measurement instrument that can be applied to determine the vibration velocities of any points on the surface of a particular machine [52, 53]. working mechanism of LDV is based on the laser Doppler concept where a frequency-modulated coherent laser beam is reflected from a vibrating…”
BackgroundA low-cost fiber based displacement sensor for industrial applications
Saimon, S. M., Ngajikin, N. H., Omar, M. S., et al. (2019) · TELKOMNIKA (Telecommunication Computing Electronics and Control) · doi:10.12928/telkomnika.v17i2.9754 · Cited by 5 · cited 1×
“[50] developed a low-cost fiber optic displacement sensor (FODS) for industrial applications that is immune to electromagnetic interference.”
BackgroundFaults detection based on fuzzy concepts for vibrations monitoring in gas turbine
Alili, B., Hafaifa, A., & Iratni, A. (2020) · Diagnostyka · doi:10.29354/diag/129581 · Cited by 5
Semil, R., & Jaiswal, P. (2019) · International Journal of Recent Technology and Engineering (IJRTE) · doi:10.35940/ijrte.b2828.078219 · Cited by 5
A novel analysis (I -KAZ 3D) for three axial vibration signal in bearing condition monitoring
Nuawi, N. Z., Abdullah, S., Ismail, A. R., et al. (2008) · International Conference on System Science and Simulation in Engineering · Cited by 4
Fault diagnosis of single point cutting tool using spectrum, cepstrum and wavelet analysis
Aralikatti, S. S., Ravikumar, K. N., & Kumar, H. (2019) · AIP Conference Proceedings · doi:10.1063/1.5141218 · Cited by 3 · cited 2×
“Compared to the cepstrum analysis, spectrum analysis does not provide any information regarding the time localization of frequency component [77].”
Method(2019) · International Journal of Engineering and Advanced Technology · doi:10.35940/ijeat.f8492.088619 · Cited by 3
Roller Bearing Fault Diagnosis Based on IMF Kurtosis and SVM
Zhu, K., Song, X. G., & Xue, D. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.694-697.1160 · Cited by 3 · cited 2×
“…can effectively diagnose the condition using only a few features of vibration data but the fault types and severity level cannot be determined [71] Applied the kurtosis and SVM method to diagnose roller bearing fault accuracy of the proposed method is 93.75% and can be applied even with a…”
BackgroundMethodInfluentialApplication of the Hilbert – Huang Transform for Machine Fault Diagnostics
Xuan, Z. Y., & Ge, M. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.182-183.1484 · Cited by 3 · cited 2×
“…method to monitor and diagnose bearing faults at an early stage proposed method outperforms the EEMD and Hilbert envelope spectrum analysis method [115] Applied the HHT and FT methods to diagnose machine fault HHT outperforms FT, where FT can only differentiate characteristic frequency in…”
MethodLiu, L. (2005) · Journal of Hydroelectric Engineering · Cited by 3
Rubbing Detection of Sliding Bearings in Early Stage by Frequency Modulation Analysis
Sako, T., Tokumo, K., & Yoshie, O. (2014) · Electronics and Communications in Japan · doi:10.1002/ecj.11559 · Cited by 2 · cited 1×
“To detect the rubbing phenomenon of the sliding bearing in the machine, the cepstrum analysis method was applied by Sako et al. [76].”
MethodGear Incipient Diagnosing Based on EEMD and Genetic-Support Vector Machine
Xiao, C. Y., Shi, B. Q., Hao, Z. J., et al. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.397-400.2104 · Cited by 2 · cited 1×
“…fault proposed method yielded a better diagnostic accuracy compared to the SVM and NN method, in addition to strong generalization capability [169] Combined the GA, SVM, and EEMD methods to diagnose gear faults Incorporating the GA to select the parameter of SVM can improve the…”
MethodTian, G., Wang, S., & Zhang, C. (2012) · 2022 IEEE 20th International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2012.6301231 · Cited by 2 · cited 2×
“…the higher-order spectrum analysis and SVM to diagnose faults in power electronic circuit proposed method achieved the accuracy of up to 99% [91] Applied the power spectrum analysis (PSA) and SVM to diagnose rolling bearing fault Using the PSA with SVM classifier gives better result compared…”
BackgroundMethodA Novel Analysis (I-KAZ 3D) for Three Axial Vibration Signal in Bearing Condition Monitoring
Nuawi, M. Z. (2008) · Cited by 2
A New Dual-Channel Analyzer for Vibration of Rotary Machine
He, Q., & Du, D. (2008) · ASME Power Conference · doi:10.1115/power2008-60017 · Cited by 1 · cited 1×
“Nuawi et al. [20] used a four-channel vibration analyzer in the monitoring process of bearing condition and the application of a dual-channel analyzer for machine monitoring can be seen in [21, 22].”
Vibrations Analysis of 4 Jaw Flexible Coupling Considering Unbalancing in Two Planes
Kumar, S., Sehgal, R., Kumar, R., et al. (2012) · Cited by 1
Wavelet packet feature extraction for vibration monitoring
Yen, G. Y., & Lin, K.-C. (n.d.) · Proceedings of the 1999 IEEE International Conference on Control Applications (Cat. No.99CH36328) · doi:10.1109/cca.1999.801206
Gearbox Fault Detection Using Hilbert and TT-Transform
Fan, X., & Zuo, M. J. (2005) · Key Engineering Materials · doi:10.4028/www.scientific.net/kem.293-294.79
A multi-application FFT analyzer based on a DSP architecture
Betta, G., Liguori, C., & D'Apuzzo, M. (n.d.) · IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309) · doi:10.1109/imtc.1999.776961
Research works printed but not linked: 15
- Aherwar A., 2012, Vibration analysis techniques for gearbox diagnostic: a review, International Journal of Advances in Engineering & Technology, 3, 4
- Elango S., 2018, Vibration analysis of bearing by using mechanical stethoscope, International Journal of Advanced Science and Research, 3, 1137
- Norton H. N., 1989, Handbook of Transducers
- SalamiM.-J. E. GaniA. andPervezT. Machine condition monitoring and fault diagnosis using spectral analysis techniques Proceedings of the 1st International Conference on Mechatronics June 2001 Kuala Lumpur Malaysia 690–700.
- Doscher J., 1999, Adxl105: a lower-noise, wider-bandwidth accelerometer rivals performance of more expensive sensors, Analog Dialogue, 33, 27
- Fernandez A., 2020, Seismic Velocity Transducers
- SarhanA. A. MatsubaraA. IbarakiS. andKakinoY. Monitoring of cutting force using spindle displacement sensor Proceedings of the Japan – USA Symposium on Flexible Automation July 2004 Denver CO USA 1–4.
- HowardI. A review of rolling element bearing vibration’detection diagnosis and prognosis ” Report for the Defence Science and Technology Organization Canberra (Australia). Report no. DSTO-RR-0013 October. Victoria 1994 DSTO Aeronautical and Maritime Research Laboratory. Tech. Rep.
- LahdelmaS.andJuusoE. Signal processing in vibration analysis Proceedings of the 5th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies July 2008 Edinburgh Scotland 867–878.
- 10.1016/j.matpr.2017.02.140 · DOI · Paper page
- RunessonJ. Vibration analysis for condition monitoring of mechanical presses 2019 Lund University Lund Sweden Master’s Thesis.
- DalpiazG. RivolaA. andRubiniR. Gear fault monitoring: comparison of vibration analysis techniques Proceedings of the 3rd International Conference Acoustical and Vibratory Surveillance Methods and Diagnostics Techniques January 1998 Las Vegas NV USA 623–632.
- Randall R. B., 1987, Frequency Analysis
- SafizadehM. LakisA. andThomasM. Using short-time fourier transform in machinery diagnosis Proceedings of the 4th WSEAS International Conference on Electronic Signal Processing and Control April 2005 Rio de Janeiro Brazil 1–7.
- CastelinoM. R. KumarH. S. SrinivasaP. P. andVijayG. S. Artificial neural network-based vibration signal analysis of rotary machines-case studies Proceedings of the International Conference on Emerging Trends in Engineering July 2014 Karnataka India 211–218.
Cited by
A Review on Vibration Monitoring Techniques for Predictive Maintenance of Rotating Machinery
Romanssini, M., de Aguirre, P. C. C., Compassi-Severo, L., & Girardi, A. G. (2023) · Eng · doi:10.3390/eng4030102 · Cited by 159
Varghese, H., Hakkeem, H. M. A., Chauhan, K., Thouti, E., Pillai, S., & Chandran, A. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107339 · Cited by 148
Vibration signal-based early fault prognosis: Status quo and applications
Lv, Y., Zhao, W., Zhao, Z., Li, W., & Ng, K. K. H. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101609 · Cited by 135
An In-Depth Study of Vibration Sensors for Condition Monitoring
Hassan, I. U., Panduru, K., & Walsh, J. (2024) · Sensors · doi:10.3390/s24030740 · Cited by 189
“Real-time Monitoring: Continuous monitoring provides real-time analysis of equipment performance [72] as well as frequent alerts for any defects or deviations from standard operating conditions.”
BackgroundMethodAI for tribology: Present and future
Yin, N., Yang, P., Liu, S., Pan, S., & Zhang, Z. (2024) · Friction · doi:10.1007/s40544-024-0879-2 · Cited by 109
“Its main purpose is to promptly detect faults in situ and implement preventive measures [279–281].”
Metadata
- Authors
- Mohd Ghazali, M. H., & Rahiman, W.
- Affiliations
- Universiti Sains Malaysia (MY)
- Corresponding author
- Rahiman, Wan
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2021-01
- Volume
- 2021
- Issue
- 1
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W3200557187
- Cited by
- 249
- References
- 159
- Citations by year
- 2026: 60 · 2025: 83 · 2024: 61 · 2023: 25 · 2022: 19 · 2021: 1
- FWCI
- 3.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Funders
- Collaborative Research in Engineering, Science and Technology Centre (304/PELECT/6050424/C121)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Keywords
- vibration analysis, machine condition monitoring, fault diagnosis, vibration sensors, vibration signal acquisition, feature extraction, fault identification, artificial intelligence, deep learning, time-domain statistical features, unbalance, misalignment, wear, predictive maintenance, intelligent machines
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.