Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Open accessThe DOI matches its Crossref record; 164 of the 164 references it cites were found in a registry or an index; 18 of the 128 sources its claims cite were checked for support.
Abstract
Untimely machinery breakdown will incur significant losses, especially to the manufacturing company as it affects the production rates. During operation, machines generate vibrations and there are unwanted vibrations that will disrupt the machine system, which results in faults such as imbalance, wear, and misalignment. Thus, vibration analysis has become an effective method to monitor the health and performance of the machine.
Overview
CoChat Summary
TL;DR
This systematic review synthesizes vibration analysis for machine monitoring and diagnosis across data acquisition, feature extraction, and AI-based fault recognition. It reports that AI-based techniques account for about 57% of reviewed methods, with RMS, FFT, WT, and SVM among the most used, and highlights deep learning/deep transfer learning and noncontact sensors as future directions.
Key findings
- AI-based techniques contribute about 57% of the overall vibration analysis methods reviewed; SVM is the most widely used AI method, attributed to high classification accuracy and low computational time.
- The most applied methods are RMS in the time domain, FFT in the frequency domain, and WT in the time-frequency domain; almost 80% of previous studies applied feature extraction/signal processing techniques such as envelope analysis, STFT, WT, and HHT, with or without AI.
- Accelerometer remains the best sensor option for vibration analysis; computer-based analyzers with DSP/FPGA are nearly as good as conventional analyzers, and noncontact sensors/LDV are expected to be widely applied in the future due to flexibility and independence from mass-loading effects.
- Deep learning/DNN can automatically extract fault features from raw vibration signals, while traditional time-domain features such as RMS and crest factor remain relevant and their application with AI is expected to continue increasing. Cited studies report accuracies including 93.33% for crest factor + SVM gear fault diagnosis, 99.3% for STFT + NMF rolling bearing fault detection, 100% for CEEMDAN + PSO-LSSVM rolling bearing diagnosis, and 95% for decision tree + fuzzy logic spur gear fault diagnosis.
Methods
- A Systematic Literature Review (SLR) approach was employed to collect relevant primary studies and answer five research questions; selected papers were classified and analyzed through content analysis.
- Results were classified into survey, simulation, and experiment/real-time deployments; more than 100 articles were discussed, covering data acquisition instruments, feature extraction methods, and AI-based fault recognition.
- The review follows the three main vibration analysis steps: data acquisition, signal processing/feature extraction, and fault recognition; due to the wide range of techniques, only widely used ones are discussed.
Limitations
- The paper states that a review of all literature is impossible and some papers might be omitted; only widely used techniques are discussed.
- The paper states that most reported studies applied vibration analysis on one test rig or machine and in controlled environments, so excellent results cannot be guaranteed on other machines or in industrial settings; AI data-driven methods may also face generalization issues when entirely new datasets are used.
- The paper states that most existing methods assume Gaussian vibration signals, while industrial signals are often corrupted by non-Gaussian noise not widely considered; Digital Twin modeling remains challenging due to nonlinear dynamics and uncertainty in smart machines.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 9 Not valid · 101 Not checked · 57 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Kurtosis feature can provide the information regarding the non-Gaussianity or impulsiveness of the vibration signals [68,69].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 7.4. Kurtosis.
What the sources say
- Partly supportedcites [68] 68. P. H. Westfall, "Kurtosis as p," e American Statistician, vol. 68, no. 3, pp. 191-195, 2014. sourceExperimental — accuracy not yet measured
Section 3 (“How Data Look”; page unavailable) says sample kurtosis primarily reflects outliers, supporting its use as an indicator of extreme or impulsive observations. Section 4 compares kurtosis with that of a normal distribution, but the paper does not examine vibration signals or establish kurtosis as a measure of their non-Gaussianity. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [69] 69. J. Hebda-Sobkowicz, R. Zimroz, and A. Wyłomańska, "Se- lection of the informative frequency band in a bearing fault diagnosis in the presence of non-Gaussian noise-comparison of recently developed methods," Applied Sciences, vol. 10, no. 8, p. 2657, 2020. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“FFT is also unable to investigate the transient features efficiently in time and can predict the fault but cannot determine the severity of fault [3].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 8.1. FFT.
What the sources say
- Partly supportedcites [3] 3. S. Kumar, M. Lokesha, K. Kumar, and K. Srinivas, "Vibration based fault diagnosis techniques for rotating mechanical components: review paper," in Proceedings of the Interna- tional Conference on Advances in Manufacturing, Materials and Energy Engineering, pp. 1-6, Karnataka, India, June 2018. sourceExperimental — accuracy not yet measured
The Review (p. 3) says FFT can predict a gear fault but cannot determine its severity. The Review (p. 6) says wavelet analysis detects transient components efficiently and outperforms FFT power-spectrum analysis, but it does not specifically say FFT is unable to investigate transient features efficiently in time. (LLM, conf=0.85)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 9.2. WVD.
What the sources say
- Could not verifycites [93] 93. Y. Wei, Y. Li, M. Xu, and W. Huang, "A review of early fault diagnosis approaches and their applications in rotating machinery," Entropy, vol. 21, no. 4, p. 409, 2019. sourceExperimental — accuracy not yet measured
Section 2.1.2 discusses wavelet transforms, and Section 3.2 discusses their applications, but neither addresses WVD or its use for determining time-frequency structures. Searches for “WVD,” “Wigner Ville distribution,” and “cross-term interference” found no passage stating the claimed reason for avoiding direct use of WVD. (LLM, conf=0.72)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In terms of noise, most of the reported existing methods can effectively distinguish noise from vibration signals.”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 11. Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
In the paper
“e results showed that NN performed better for nonstationary signals in the time-frequency domain compared to the frequency domain.”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 10.2. NN.
What the sources say
- Not matchedcites [137] 137. M. R. Castelino, H. S. Kumar, P. P. Srinivasa, and G. S. Vijay, "Artificial neural network-based vibration signal analysis of rotary machines-case studies," in Proceedings of the Inter- national Conference on Emerging Trends in Engineering, pp. 211-218, Karnataka, India, July 2014.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
43 more claims
Create a free account to see all 182 claims and every source verdict.
- It may state two separate claims as one. 77
- Probably not a substantial claim. 95
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 5.3. Velocity Transducer.
“most velocity transducers are prone to reliability problems at operational temperatures that exceed 121 ° C”
§ Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review > 762
“to reliability problems at operational frequency of more than 121 ° C”
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 1×
“, Huang et al. [108] introduced the HHT in 1998 to determine the characteristics of stationary, nonstationary, and transient signals.”
BackgroundA review on genetic algorithm: past, present, and future
Katoch, S., Chauhan, S. S., & Kumar, V. (2021) · Multimedia Tools and Applications · doi:10.1007/s11042-020-10139-6 · Cited by 4,655 · cited 1×
“GA. GA, derived from a study of a biological system, can solve both constrained and unconstrained optimization problems based on a natural selection process [164, 165].”
BackgroundDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
A complete ensemble empirical mode decomposition with adaptive noise
Torres, M. E., Colominas, M. A., Schlotthauer, G., & Flandrin, P. (2011) · 2011 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2011.5947265 · Cited by 2,801 · cited 1×
“However, in the low-frequency region, the energy leakage and modal aliasing problems still exist. is what motivates Torres et al. [110] to propose the complete EEMD with adaptive noise (CEEMDAN) method, which can produce better modal frequency spectrum separation outputs.”
MethodZadeh, L. A. (1988) · Computer · doi:10.1109/2.53 · Cited by 1,824
Theory of communication. Part 1: The analysis of information
Gabor, D. (1946) · Journal of the Institution of Electrical Engineers - Part III: Radio and Communication Engineering · doi:10.1049/ji-3-2.1946.0074 · Cited by 1,795 · cited 1×
“STFT. STFTwas pioneered by Gabor back in 1946 in the communication field [117].”
BackgroundFedHealth: A Federated Transfer Learning Framework for Wearable Healthcare
Chen, Y., Qin, X., Wang, J., Yu, C., & Gao, W. (2020) · IEEE Intelligent Systems · doi:10.1109/mis.2020.2988604 · Cited by 1,005 · cited 1×
“Compared to the NN and SVM method, the DNN approach can adaptively learn the hierarchical representation from raw data through multiple nonlinear transformations and approximate complex nonlinear functions instead of extracting the fault feature manually [141].”
MethodFeng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998 · cited 5×
“HHT consists of empirical mode decomposition (EMD) of signals and Hilbert transform, and by combining these two methods, a Hilbert spectrum can be obtained, where the faults in a running machine can be diagnosed [92].”
BackgroundMethodInfluentialFEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879 · cited 2×
“Time-frequency domain A study on applying the CWT method in the feature extraction of mechanical vibration signals conducted by [101].”
MethodPeng, Z. K., Tse, P. W., & Chu, F. L. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.01.006 · Cited by 840 · cited 1×
“Peng et al. [111] introduced a better version of HHT that incorporated the WPT technique to decompose the vibration signal into a set of narrowband signals. proposed method was shown to have a better resolution in the time and frequency domain compared to the wavelet-based scalogram.”
Method
Research works printed but not linked: 15
- Aherwar A., 2012, Vibration analysis techniques for gearbox diagnostic: a review, International Journal of Advances in Engineering & Technology, 3, 4
- Elango S., 2018, Vibration analysis of bearing by using mechanical stethoscope, International Journal of Advanced Science and Research, 3, 1137
- Norton H. N., 1989, Handbook of Transducers
- SalamiM.-J. E. GaniA. andPervezT. Machine condition monitoring and fault diagnosis using spectral analysis techniques Proceedings of the 1st International Conference on Mechatronics June 2001 Kuala Lumpur Malaysia 690–700.
- Doscher J., 1999, Adxl105: a lower-noise, wider-bandwidth accelerometer rivals performance of more expensive sensors, Analog Dialogue, 33, 27
- Fernandez A., 2020, Seismic Velocity Transducers
- SarhanA. A. MatsubaraA. IbarakiS. andKakinoY. Monitoring of cutting force using spindle displacement sensor Proceedings of the Japan – USA Symposium on Flexible Automation July 2004 Denver CO USA 1–4.
- HowardI. A review of rolling element bearing vibration’detection diagnosis and prognosis ” Report for the Defence Science and Technology Organization Canberra (Australia). Report no. DSTO-RR-0013 October. Victoria 1994 DSTO Aeronautical and Maritime Research Laboratory. Tech. Rep.
- LahdelmaS.andJuusoE. Signal processing in vibration analysis Proceedings of the 5th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies July 2008 Edinburgh Scotland 867–878.
- 10.1016/j.matpr.2017.02.140 · DOI · Paper page
- RunessonJ. Vibration analysis for condition monitoring of mechanical presses 2019 Lund University Lund Sweden Master’s Thesis.
- DalpiazG. RivolaA. andRubiniR. Gear fault monitoring: comparison of vibration analysis techniques Proceedings of the 3rd International Conference Acoustical and Vibratory Surveillance Methods and Diagnostics Techniques January 1998 Las Vegas NV USA 623–632.
- Randall R. B., 1987, Frequency Analysis
- SafizadehM. LakisA. andThomasM. Using short-time fourier transform in machinery diagnosis Proceedings of the 4th WSEAS International Conference on Electronic Signal Processing and Control April 2005 Rio de Janeiro Brazil 1–7.
- CastelinoM. R. KumarH. S. SrinivasaP. P. andVijayG. S. Artificial neural network-based vibration signal analysis of rotary machines-case studies Proceedings of the International Conference on Emerging Trends in Engineering July 2014 Karnataka India 211–218.
Cited by
Items 101–200 of 244
A Doppler Radar With a Sweeping Lock-in Demodulator for Machine Vibration Sensing
Wampler, L., Xia, F., Yeung, S. Y. F., Hirano, T., Alshehri, A. H., Furokawa, M., & Youcef‐Toumi, K. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3325820 · Cited by 4
“It is widely considered the best method of determining machine condition as it can identify issues nondestructively, in real-time, and without process interference [1], [2], [10], [11], [12].”
MethodMethod for Detecting Industrial Defects in Intelligent Manufacturing Using Deep Learning
Yu, B., & Xie, C.-L. (2024) · Computers, materials & continua/Computers, materials & continua (Print) · doi:10.32604/cmc.2023.046248 · Cited by 9
Carreon, A. H., DePaiva, J. M., & Veldhuis, S. C. (2024) · Applied Sciences · doi:10.3390/app14062593 · Cited by 3
Pandey, S., & Banerjee, A. (2024) · IEEE Transactions on Information Theory · doi:10.1109/tit.2024.3414336 · Cited by 3
Inverse-time protection method of pumped-storage unit vibration
Zhang, F., Xuguo, S., Dalin, Z., et al. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102486 · Cited by 3
Carreon, A. H., DePaiva, J. M., Barooah, R. K., & Veldhuis, S. C. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02461-9 · Cited by 3
“…al., 2019; Demetgül et al., 2022; Jameson & Vogl, 2018; Martin et al., 1991; Uhlmann et al., 2008; Vogl et al., 2019) and literature works that reviewed and applied time domain statistical features (Al-Naggar et al., 2021; Mohd Ghazali & Rahiman, 2021; Samanta & Al-Balushi, 2003; Sim et al., 2020).”
InfluentialFuzzy Based Open Switch Fault Diagnosis of Three Phase Voltage Source Inverter
Sonawane, V., & Patil, S. B. (2022) · International Conference on Computing Communication Control and automation · doi:10.1109/iccubea54992.2022.10010992 · Cited by 3
Identification of bearing fault in induction motor using random forest algorithm
KaliappanSivakumar, K., Ganesan, G., Chermakani, G. S., & Muthukumar, D. (2023) · E3S Web of Conferences · doi:10.1051/e3sconf/202338701005 · Cited by 4
Nirmal, W. C., Lakmal, H. K. I. S., & Fernando, K. J. P. (2025) · International Conference on Advanced Research in Computing (ICARC) · doi:10.1109/icarc64760.2025.10962877 · Cited by 2
“A number of sensors mounting methods were identified as non-mounted, stud mounted, magnet mounted and adhesive mounted [19].”
Ibrahim, R., Zemouri, R. M., Tahan, A. S., Kedjar, B., Merkhouf, A., & Al‐Haddad, K. (2025) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3571883 · Cited by 6
“These signals encompass current [4], [5], air-gap flux [6], [7], [8], [9], stray flux [8], vibration [10], [11], acoustics [11], and more.”
Guo, R., Zhang, J., Wen, Y., et al. (2025) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-025-05763-y · Cited by 2
“Combining TD and FD, TFD analysis methods are derived from analyzing signals in two dimensions, including STFT, wavelet transform (WT), and Hilbert–Huang transform (HHT), etc. [22].”
HVSR: A Hybrid Vibration Signal Recognizer for Robust and Accurate Signal Classification
Fan, X., Li, S., Gao, X., Wang, Y., Bofan, L., Zhang, W., & Cheng, J. (2025) · International Conference on Neural Networks, Information and Communication Engineering (NNICE) · doi:10.1109/nnice64954.2025.11063932 · Cited by 2
“Early works in the field of vibration signal analysis laid the foundation for modern diagnostic techniques by focusing on the application of the Fast Fourier Transform (FFT) to convert time-domain signals into their frequency-domain equivalents [1, 2].”
Mirza, F. K., Öz, U., Hekimoğlu, M., Aydemir, M. T., Pural, Y. E., Baykaş, T., & Pekcan, Ö. (2025) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-025-04779-z · Cited by 10
“…diagnostics (Al-Badour et al. 2011), materials analysis (Kerboua et al. 2008; Lou et al. 2009; Ma et al. 2024), and predictive maintenance (Mohd Ghazali and Rahiman 2021; Nie et al. 2024; Renwick and Babson 1985; Vishwakarma et al. 2017), where capturing multifaceted signal dynamics is…”
Mounted Accelerometer Frequency Response of Adhesive Products and Aluminum Frame Quick Mounts
Hummel, K., Hix, J. D., & Cárdenas, E. S. (2025) · Vibration · doi:10.3390/vibration8040061 · Cited by 2
“Benefits of utilizing piezoelectric accelerometers include high sensitivity, lightweight, compact, wide dynamic and frequency range, cost advantage, and they offer model variety [9,10,14].”
Carreon, A. H., & Veldhuis, S. C. (2025) · Processes · doi:10.3390/pr13124084 · Cited by 2
“Its practicality is illustrated by the capability to quantify the time-varying phenomenon in the frequency content of the evaluated signal [78,79] Nevertheless, the common theme between all these types of analysis methods revolves around the calculation and use of features to diagnose and/or…”
InfluentialLi, Y., & Wang, Q. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3655899 · Cited by 2
“…diagnostic methods, vibration analysis has developed into the dominant method in the field of mechanical fault diagnosis, due to the directness and convenience of signal acquisition, as well as the rich characterization information of equipment health status contained in the signal itself [7], [8].”
Riyandwita, B. W., Putra, M. F. J., & Wicaksono, A. (2026) · Applied Mechanics and Materials · doi:10.4028/p-oo4sal · Cited by 3
“FFT is an algorithm that enables the rapid and efficient computation of the Fourier transform [16], [17].”
Enhanced image denoising via colour component decomposition and bit-plane specific CNN models
jain, A., & Singh, P. (2026) · The Imaging Science Journal · doi:10.1080/13682199.2026.2651481 · Cited by 2
“The nature of the materials used in the sensor may also affect the level of noise, as different materials have different levels of sensitivity and noise characteristics [20,21].”
Basavankattimath, M. S., & Talapati, R. J. (2026) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-026-03299-5 · Cited by 2
“Ghazali and Rahi-man (Mohamad Hazwan Mohd Ghazali and Wan Rahiman 2021) reviewed current vibration analysis in a systematic manner for machine diagnostics and monitoring.”
Sapphire MEMS Fiber-Optic Sensor With a Ceramic-Housing Package for High-Temperature Vibration
Pang, X., Yao, G., Wang, Z., et al. (2026) · IEEE Photonics Technology Letters · doi:10.1109/lpt.2026.3682756 · Cited by 2
“…quantity for characterizing the operating state of engineering systems, and its high-accuracy measurement is crucial for structural health monitoring of large-scale civil infrastructures [1], reliability assessment of industrial equipment [2], and safety maintenance of transportation systems [3].”
Kazeem, R. A., & Akinlabi, E. T. (2024) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-024-02077-6 · Cited by 4
Inner and Outer Races Bearing Damage Detection using Low-cost Fault Detecting Sensors
Arrosida, H., Susanto, A., Asngali, B., et al. (2024) · International Journal of Innovative Science and Research Technology (IJISRT) · doi:10.38124/ijisrt/ijisrt24aug812 · Cited by 2
Bringing Bearing Fault Detection to Embedded Systems Using Low-Cost Machine Learning Techniques
Teixeira, N. S., Pastrana, M. A., Moura, H. G., et al. (2024) · IEEE Latin American Conference on Computational Intelligence (LA-CCI) · doi:10.1109/la-cci62337.2024.10814776 · Cited by 2
A Vibration Signal Detection System Based on Double Intensity Modulation
Wang, J., He, K.-R., Yu, J., et al. (2025) · Photonics · doi:10.3390/photonics12040364 · Cited by 2
Analytical Diagnostic and Control System of Energy and Mechanical Efficiency of Electric Drives
Korolev, N. (2025) · Energies · doi:10.3390/en18092266 · Cited by 2
Spectrogram Zeros Method for Rolling Bearing Fault Diagnosis Under Variable Rotating Speeds
Nguyen, T.-D., Pham, T.-T., Phuc, T.-L., et al. (2025) · IEEE Access · doi:10.1109/access.2025.3582280 · Cited by 2
Głąb, I. D., & Franiasz, J. (2025) · The Archives of Automotive Engineering/ Archiwum Motoryzacji · doi:10.14669/am/196325 · Cited by 2
Model-Based 3-D Vibration Measurement Using Stereo High-Frame-Rate Images
Qin, W., Wang, F., Hu, S., et al. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3593568 · Cited by 2
“Common contact sensors include accelerometers for high-frequency vibrations [7], [8], strain gauges for detecting small deformations [9], [10], and linear variable di ff erential trans-formers for precise displacement measurements [11], [12].”
Effect of Vibrations on Rotor Model Assembly Due to Modifications in Coupling Design
Basavankattimath, M. S., Madhusudan, N., & Suresh, H. N. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00564-2 · Cited by 2
Wrzochal, M. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11029-5 · Cited by 2
Asyrofi, M. A., Susilo, D. D., & Prabowo, A. R. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-0106-3_42 · Cited by 1
Bearing race fault detection using an optomechanical micro-resonator
Shi, W., Huo, Y., Tang, X., Zhang, J., Hu, H., Li, Y., Li, X., Cao, L., Zhao, Q., Yang, Z., et al. (2024) · Optics Express · doi:10.1364/oe.529334 · Cited by 1
Öcalan, G., & Türkoğlu, İ. (2024) · Journal of Polytechnic · doi:10.2339/politeknik.1388385 · Cited by 1
Sokolski, P. (2025) · Energies · doi:10.3390/en18071610 · Cited by 1
Fault Diagnosis in Rotating Machines using Vibration Signal Analysis and Machine Learning
Amjad, S., Faraz, M., & Naqvi, S. Z. H. (2024) · International Conference on Emerging Technologies · doi:10.1109/icet63392.2024.10935064 · Cited by 1
Fenga, L., & Biazzo, L. (2025) · Applied Stochastic Models in Business and Industry · doi:10.1002/asmb.70013 · Cited by 2
Li, Q., Wu, C., Wang, S., et al. (2025) · Structures · doi:10.1016/j.istruc.2025.109818 · Cited by 1
Jovančić, P., Aleksandrović, S., Madžarević, A., et al. (2025) · Journal of Measurements in Engineering · doi:10.21595/jme.2025.24823 · Cited by 1
Abdelati, M. H., Mourad, M. A.-F. E., Matar, A.-H., et al. (2025) · Journal of Engineering and Applied Science · doi:10.1186/s44147-025-00703-y · Cited by 1
“Studies such as those by Tama et al. [19] and Ghazali and Rahiman [20] acknowledged that background mechanical noise and non-ideal sensor placement could reduce diagnostic precision.”
Li, Q., Lin, D., Ma, R., Wang, S., Ding, X., & Qin, Z. (2025) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2025.2568896 · Cited by 1
Predictive Maintenance of Rolling Element Bearing Using Vibration and Machine Learning Techniques
Katke, P., Baddela, A., Bhagat, T., Gurav, P. M., Chaudhari, K., & Mangrulkar, A. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-981-96-5791-9_16 · Cited by 1
Suhas, M., Abisset‐Chavanne, E., & Rey, P.-A. (2025) · Applied Sciences · doi:10.3390/app152111532 · Cited by 2
An Upper-Probability-Based Softmax Ensemble Model for Multi-Sensor Bearing Fault Diagnosis
Jo, J.-H., Yoo, S.-B., Dai, M., et al. (2025) · Sensors · doi:10.3390/s25226887 · Cited by 1
“With the advancement of signal processing and deep learning techniques, vibration-based fault diagnosis methods—particularly those employing convolutional neural networks (CNNs) with attention mechanisms—have demonstrated superior performance in identifying faults in rotating systems [4–10].”
Soprani, D., Santos, K. F. D. O., Macedo, L. G. C., Villani, L. G., Junior, A. G. L., & Frizera, A. (2025) · Journal of Lightwave Technology · doi:10.1109/jlt.2025.3634028 · Cited by 3
“Feature extraction and dimensionality reduction, particularly feature selection, have been employed to improve accuracy and model efficiency [7], [10], [11].”
Efficiency enhancement of thresher by auto-controlling the cylinder clearance
Warghane, R. S., & Pillai, R. E. (2023) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-023-01912-5 · Cited by 1
“This is also used to determine the deflection at concave section (Ghazali and Rahiman 2021).”
MethodVibration Sensors for Detecting Critical Events: A Case Study in Ferrosilicon Production
Waszak, M., Moen, T., Hansen, A. H., et al. (2024) · IEEE Access · doi:10.1109/access.2024.3356067 · Cited by 1
“The lack of studies in an industrial setting is also reported in a review of more than 100 articles in [15].”
BackgroundBearing fault detection using a method involving absolute value spectrum and impulsivity evaluation
Bouaouiche, K., Menasria, Y., & Khalfa, D. (2024) · Diagnostyka · doi:10.29354/diag/188371 · Cited by 3
“However, vibration D IAGNOSTYKA , Vol. 25, No. 2 (2024) Bouaouiche K, Menasria Y, Khalifa D: Bearing fault detection using a method involving absolute value … 2 analysis is more feasible for fault monitoring and detection because it offers several signal processing methods [3].”
MethodSpindle Vibration Prediction for the CNC Machining Center Using ANFIS System
Janmanee, P., & Butdee, S. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-61797-3_18 · Cited by 1
CONSTANT OR PERIODIC ACOUSTIC MONITORING OF THE ANIMAL'S BODY
Tikhonenko, D., Kalachev, A. V., & Tikhonenko, Z. O. (2024) · International Conference Process Management and Scientific Developments · doi:10.34660/inf.2022.94.88.018 · Cited by 1
Haris, N. F. N., Chik, K. A. W., & Anuar, M. A. (2024) · IEEE Student Conference on Research and Development (SCOReD) · doi:10.1109/scored64708.2024.10872734 · Cited by 1
Mendis, S., Karunasena, G., & Wimalasiri, D. H. R. J. (2025) · International Research Conference on Smart Computing and Systems Engineering (SCSE) · doi:10.1109/scse65633.2025.11030978 · Cited by 1
Ichsan, M. M. (2024) · Preprints.org · doi:10.20944/preprints202401.1749.v1 · Cited by 1
Deep Learning in Monitoring the Behavior of Complex Technical Systems
Israfil, B. I. I. B. I. (2022) · Advances in Science Technology and Engineering Systems Journal · doi:10.25046/aj070502
Offshore Connectivity as Leverage of Mobility Technologies
Fasone, G. S. R., Gusmão, V. G., & Neta, L. M. M. D. S. (2023) · Offshore Technology Conference · doi:10.4043/32320-ms
Gear Fault Diagnosis Using SVM Based on Empirical Mode Decomposition
Akhil, V. M., Mangaji, P. P., Murthy, R. N., et al. (2023) · doi:10.1109/icrtec56977.2023.10111852
“It solves convex and optimization problems [13].”
BackgroundEarly Detection of Faillure in Conveyor Chain Systems by Wireless Sensor Node
Bouattour, G., Wang, L., Al-Hammouri, S., et al. (2023) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors56945.2023.10325118
“This can be guaranteed by the integration of sensors to avoid failure or the management of loads that cause drops in the chain elements [9].”
BackgroundVibration diagnostics of machine friction units: analysis of the current state and prospects
Lytvynov, O., & Dykha, A. (2023) · PROBLEMS OF TRIBOLOGY · doi:10.31891/2079-1372-2023-110-4-44-51
Afanaseva, O. (2024) · VESTNIK OF ASTRAKHAN STATE TECHNICAL UNIVERSITY SERIES MARINE ENGINEERING AND TECHNOLOGIES · doi:10.24143/2073-1574-2024-1-84-94
Method for automated diagnostics of the technical condition of a feed crusher
Novikov, M., Smelik, V., Gimaltdinov, I., et al. (2024) · BIO Web of Conferences · doi:10.1051/bioconf/202410503001
Martianis, E., Syam, B., Isranuri, I., & Sabri, M. (2024) · E3S Web of Conferences · doi:10.1051/e3sconf/202451903027 · Cited by 1
Driving into the Dynamics−Leveraging the Direct-Quadrature-Zero Transform for Mechanical SystemsPreprint
Campos-Salazar, J. M. (2024) · doi:10.36227/techrxiv.171467794.44603055/v1
Kaya, D., Mert, D., Kahraman, A., et al. (2024) · Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi · doi:10.17780/ksujes.1393274
Kompella, K. C. D., Meghana, V., Eruventi, M., & Srinu, K. (2024) · International Conference on Innovative Sustainable Technologies for Energy, Mechatronics, and Smart Systems (ISTEMS) · doi:10.1109/istems60181.2024.10560252
“Acoustic analysis involves injection and collection of signals into machine which detect the presence of faults but faces a major challenge in acquisition of signals [5].”
BackgroundAbdulrahem, H. A. (2024) · Thi-Qar University Journal for Engineering Sciences · doi:10.31663/utjes.14.1.673
“…Internet of Things (IoT) expands to include vibration-vulnerable equipment, including factories utilizing high voltage power equipment, power plants, and residential thermal power facilities, and at the core of it is the focus on the brushless fan vibration detection(Mohd Ghazali & Rahiman, 2021).”
BackgroundMnati, H. M., Hammami, M., Ksentini, O., et al. (2025) · International Review of Applied Sciences and Engineering · doi:10.1556/1848.2025.00944
Palamarchuk, I., Mushtruk, M. M., Stadnyk, I., et al. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-82746-4_70
Design of a Low-cost Wireless Sensor System for Mechanical Vibration Monitoring Up 40 Hz
Lara, M. C., Rodríguez, M. C., Villegas-Alcaraz, J. F., et al. (2024) · IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC) · doi:10.1109/ropec62734.2024.10876921
“…shear-building [1], rotating machinery [3] and maintenance rotating machinery [5] are some examples of mechanical systems that are in constant motion is not an easy task, in some cases, it must be a system that allows the transmission of signals wirelessly and generally reduce costs [6], [7], [8].”
Motion trapezoidal profile planning for reduced jerk and vibration residuals through FIR filters
Martin, B.-P., Jacob, G.-V., Rodríguez-Donate, C., et al. (2024) · IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC) · doi:10.1109/ropec62734.2024.10876976
Jovančić, P., Aleksandrović, S., Djenadić, S., Madžarević, A., Miletić, F., & Milenović, I. L. J. (2025) · Journal of Vibroengineering · doi:10.21595/jve.2025.24624
“Ghazali and Rahiman [28] reviewed the latest vibration analysis for equipment monitoring and diagnosis, including data acquisition, feature extraction, and fault recognition techniques using artificial intelligence.”
Advanced Vibration Analysis in Smart Factories
Mistri, S., Roy, S., & Kuo, H.-C. (2025) · International Journal of Latest Technology in Engineering Management & Applied Science · doi:10.51583/ijltemas.2025.140400053
Cheng, P., Li, X., Xu, Y., et al. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.113009
Abnormal detection method of hydro-turbine generator based on vision transformer
Zhu, C., Ma, L., Zhou, Y., et al. (2025) · Intelligent Decision Technologies · doi:10.1177/18724981251356644
Weibull Reliability Based on Random Vibration Performance for Fiber Optic Connectors
Barraza-Contreras, J. M., Piña‐Monarrez, M. R., Ramos, M. M. H., et al. (2025) · Vibration · doi:10.3390/vibration8030046
Design of a Mobile Robot based on Rocker-Bogie Mechanism for Exploration in Mines
Lugo-Figueroa, A., Baca-Rodriguez, J., Monacelli, É., et al. (2025) · IEEE International Conference on Advanced Robotics and its Social Impacts (ARSO) · doi:10.1109/arso64737.2025.11124946
Classification of defects in a gear system by applying artificial neural networks RNA
Rehai, L., Bellaouar, A., Chaib, R., et al. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16276-2
Lamarti, A., Hachim, A., & Bouchgl, J. (2025) · E3S Web of Conferences · doi:10.1051/e3sconf/202564901015
Advanced Fault Detection in Steam Turbines Using Welch’s Method and Probabilistic Modeling
Puerto-Santana, C., Lizarraga-Odriozola, N. L., Díaz-Rozo, J., et al. (2025) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2025.08.131
Chebotarev, D., Chernyaev, A., & Naumov, I. (2025) · International Russian Automation Conference (RusAutoCon) · doi:10.1109/rusautocon65989.2025.11177439
RFID Harmonics-Based Sub-Millimeter Vibration Sensing
Li, P., Liu, B., Li, J., Cao, S., & Yang, P. (2025) · ACM Transactions on Sensor Networks · doi:10.1145/3771278
Mangore, S. M. P., Shegokar, N. L., & Kanu, N. J. (2025) · Advances in Mechanical Engineering · doi:10.1177/16878132251384493
“43 These references collectively support the methodology and statistical parameters we have employed in our research.”
Nguyen, T.-D., Nguyen, T.-D., Nguyen, T.-T.-N., et al. (2025) · Lecture notes in networks and systems · doi:10.1007/978-3-032-03856-2_6
Mančić, M., Mančić, M., Jovanović, D., et al. (2025) · Springer proceedings in physics · doi:10.1007/978-3-032-10786-2_23
Signal Synchronization and Segmentation in CNC Lathe Machines
Chen, Y., Chou, C.-W., Huang, K.-C., et al. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-3-032-07675-5_16
Ramkishorekumar Reddy, P., & Meganathan, D. (2025) · Research Square · doi:10.21203/rs.3.rs-7733864/v1
Detección de Anomalías Vibratorias en Maquinaria Mediante Sensores MEMS de Bajo Costo
Salas, C. A. R., Leyva, L. E. S., Santos, I. B. L., et al. (2025) · Revista NeyArt · doi:10.61273/neyart.v3i5.141
Soprani, D., dos Santos, K. K. F., Macedo, L. G. C., Villani, L. G., Junior, A. G. L., & Frizera, A. (2025) · IEEE International Conference on Industry Applications · doi:10.1109/induscon66435.2025.11241881 · Cited by 1
Wang, Z., Hao, H., Zhu, B., et al. (2025) · IEEE International Symposium on Parallel and Distributed Processing with Applications (ISPA) · doi:10.1109/ispa67752.2025.00027
“A typical example is vibration sensor-based monitoring methods [16] [12] [9], which usually involve mounting accelerometers on the motor casing to extract spectral features of vibration signals for fault identification.”
Event-Based Visual Microphone Using Laser Speckle
Shirakawa, R., Sugimoto, S., Sogabe, Y., et al. (2025) · European Signal Processing Conference (EUSIPCO) · doi:10.23919/eusipco63237.2025.11226425
“A Visual Vibrometer [1]–[8] is a system that uses optical equipment to measure the minute vibrations present on the surface of an object; it is used for measuring the physical properties of materials [4], detecting abnormalities in equipment [6], and so on.”
Ma, Y., Liu, J., Liu, Y., Du, Z. W., & Zhang, Z. (2025) · International Conference on Industrial Artificial Intelligence (IAI) · doi:10.1109/iai68403.2025.11276957
“Time-frequency analysis obtains wavelet packet energy entropy and envelope spectrum entropy [16-17] .”
Fault Diagnosis of a Vehicle Cylinder Head: An AI Approach
Haque, I., Mohammadzaheri, M., Soltani, P., & Al-Lawati, L. (2026) · Emerging trends in mechatronics · doi:10.1007/978-981-95-3921-5_4
Arawade, S., & Piechowicz, J. (2026) · Research Square · doi:10.21203/rs.3.rs-8426114/v1
Ayala, L. A., Quiroz, L. F., & Herrera-Cabrera, A. (2026) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-025-02286-7
Event-Based Vibration Measurement via Dynamic Mode Decomposition
Okamoto, H., Kurihara, K., Maeda, Y., & Hamamoto, T. (2025) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors59705.2025.11330921
Performance Evaluation of Five-Axis CNC Milling via Spindle Current and Vibration Monitoring
Cardoso, B., Ferreira, J., Silva, T. E. F., et al. (2026) · Metals · doi:10.3390/met16010129
“RMS is particularly suitable for stationary conditions and is frequently used alongside Fast Fourier Transformation (FFT) for detecting frequency components associated with chatter [8,14].”
A novel method for the severity evaluation of a loose bolt based on the nonlinear output spectrum
Li, Q., Shi, B. K., Wang, S., et al. (2026) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2026.2623092
Yi, C.-P., Tsai, I.-H., Lin, Y.-J., et al. (2026) · IEEE Access · doi:10.1109/access.2026.3665560
“Traditional motor diagnostics have largely relied on vibration sensing, which offers high sensitivity to mechanical defects because such faults directly modulate the structural dynamics of rotating components [5], [6].”
Riyandwita, B. W., Dhipa, D. A., & Abryantoni, D. D. (2026) · Applied Mechanics and Materials · doi:10.4028/p-ylerd5
“This monitoring involves collecting data on frequency and amplitude, followed by detailed examination through vibration analysis techniques [17] .”
Ridwan, D. Z., & Brajangan, P. P. (2025) · doi:10.1109/bts-i2c67944.2025.11399347
“When labeled data are limited or uneven, tree-based methods (and their relatives) are also known to be robust a useful property for early stage fleet pilots and progressive rollouts [3].”
Metadata
- Authors
- Mohd Ghazali, M. H., & Rahiman, W.
- Affiliations
- Universiti Sains Malaysia (MY)
- Corresponding author
- Rahiman, Wan
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2021-01
- Volume
- 2021
- Issue
- 1
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W3200557187
- Cited by
- 249
- References
- 159
- Citations by year
- 2026: 60 · 2025: 83 · 2024: 61 · 2023: 25 · 2022: 19 · 2021: 1
- FWCI
- 3.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Funders
- Collaborative Research in Engineering, Science and Technology Centre (304/PELECT/6050424/C121)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Keywords
- vibration analysis, machine condition monitoring, fault diagnosis, vibration sensors, vibration signal acquisition, feature extraction, fault identification, artificial intelligence, deep learning, time-domain statistical features, unbalance, misalignment, wear, predictive maintenance, intelligent machines
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.