The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Fabrication and Mechanical Properties of Completely Biodegradable Hemp Fiber Reinforced Polylactic Acid Composites
Abstract
Biodegradable composite materials can be produced by the combination of biodegradable polymers and natural fibers. In this study, a new biodegradable composite of hemp fiber reinforced polylactic acid (PLA) was fabricated using the hot press method. Mechanical properties of composites with different fiber volume fractions were tested. The optimum fiber content was determined according to the test results. Effects of alkali treatment on the fiber surface morphology and the mechanical properties of the composites were investigated. Test results show that the composite with 40% volume fraction of alkali treated fiber has the best mechanical properties. The tensile strength, elastic modulus, and flexural strength of the composite with 40% treated fiber are 54.6 MPa, 8.5 Gpa, and 112.7 MPa respectively, which are much higher than those of PLA alone. The composites have lower densities, which were measured to be from 1.19 g/cm 3 to 1.25 g/cm 3. Specific strengths were also calculated. Surface morphologies of fiber and fracture surfaces of the composites were observed using the SEM method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 1×
“Therefore, natural fiber reinforced composite materials have led to a renewed interest [2].”
BackgroundNatural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Astm, I. (2007) · Medical Entomology and Zoology · Cited by 1,943
Aziz, S. H., & Ansell, M. P. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.10.001 · Cited by 682
Kenaf reinforced biodegradable composite
Nishino, T., Hirao, K., Kotera, M., Nakamae, K., & Inagaki, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00099-x · Cited by 676
Biodegradable composites based on l-polylactide and jute fibres
Plackett, D., Løgstrup Andersen, T., Batsberg Pedersen, W., & Nielsen, L. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00100-3 · Cited by 531
HUDA, M., DRZAL, L., MOHANTY, A., & MISRA, M. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489
Influence of natural fibres on the mechanical properties of biodegradable polymers
Wollerdorfer, M., & Bader, H. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)10015-2 · Cited by 429
Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate
Wang, H., Sun, X., & Seib, P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 279
Gassan, J. (2002) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00116-6 · Cited by 271
Cited by
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Hemp fiber and its composites – a review
Shahzad, A. (2012) · Journal of Composite Materials · doi:10.1177/0021998311413623 · Cited by 687
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Shalwan, A., & Yousif, B. F. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.07.014 · Cited by 607
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Recent advancement in the natural fiber polymer composites: A comprehensive review
Vigneshwaran, S., Sundarakannan, R., John, K. M., Joel Johnson, R. D., Prasath, K. A., Ajith, S., Arumugaprabu, V., & Uthayakumar, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124109 · Cited by 465
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Development and characterization of PLA-based green composites: A review
Bajpai, P. K., Singh, I., & Madaan, J. (2014) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705712439571 · Cited by 363
PLA based biocomposites for sustainable products: A review
Trivedi, A. K., Gupta, M. K., & Singh, H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.02.002 · Cited by 337
Industrial Hemp Fibers: An Overview
Manaia, J. P., Manaia, A. T., & Rodriges, L. (2019) · Fibers · doi:10.3390/fib7120106 · Cited by 317
“Hargitai et al. [90] found that the optimum volume fraction of hemp fiber-reinforced PP composites was between 40% and 50 wt % of fiber, and Hu and Lim [91] showed that the hemp fiber-reinforced PLA composites with 40 wt % volume fraction of alkali-treated fiber had the best mechanical properties.”
BackgroundAbdollahi, M., Alboofetileh, M., Rezaei, M., & Behrooz, R. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.02.006 · Cited by 307
Ramesh, M., Deepa, C., Kumar, L. R., Sanjay, M., & Siengchin, S. (2022) · Journal of Industrial Textiles · doi:10.1177/1528083720924730 · Cited by 299
Hemp as a potential raw material toward a sustainable world: A review
Ahmed, A. T. M. F., Islam, M. Z., Mahmud, M. S., Sarker, M. E., & Islam, M. R. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e08753 · Cited by 284
Latif, R., Wakeel, S., Zaman Khan, N., Noor Siddiquee, A., Lal Verma, S., & Akhtar Khan, Z. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684418802022 · Cited by 282
A review on mechanical behavior of natural fiber reinforced polymer composites and its applications
Jariwala, H., & Jain, P. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684419828524 · Cited by 258
A review on physico-mechanical properties of bast fibre reinforced polymer composites
Kiruthika, A. V. (2017) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.12.003 · Cited by 171
Dayo, A. Q., Gao, B.-C., Wang, J., Liu, W.-B., Derradji, M., Shah, A. H., & Babar, A. A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.024 · Cited by 158
Potential of Industrial Hemp for Phytoremediation of Heavy Metals
Placido, D. F., & Lee, C. C. (2022) · Plants · doi:10.3390/plants11050595 · Cited by 96
Finnerty, J., Rowe, S., Howard, T., Connolly, S., Doran, C., Devine, D. M., Gately, N. M., Chyzna, V., Portela, A., Bezerra, G. S. N., et al. (2023) · Journal of Composites Science · doi:10.3390/jcs7040141 · Cited by 66
Metadata
- Authors
- Hu, R., & Lim, J.-K.
- Venue
- Journal of Composite Materials
- Publisher
- SAGE Publications
- Published
- 2007-07
- Volume
- 41
- Issue
- 13
- Pages
- 1655-1669
- ISSN
- 0021-9983 (ISSN-L)
- 1530-793X
- OpenAlex
- W2085288345
- Cited by
- 334
- References
- 13
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.