Effects of Quaternary Ammonium Chain Length on Antibacterial Bonding Agents
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
The objectives of this study were to synthesize new quaternary ammonium methacrylates (QAMs) with systematically varied alkyl chain lengths (CL) and to investigate, for the first time, the CL effects on antibacterial efficacy, cytotoxicity, and dentin bond strength of bonding agents. QAMs were synthesized with CL of 3 to 18 and incorporated into Scotchbond Multi-Purpose (SBMP) bonding agent. The cured resins were inoculated with Streptococcus mutans. Bacterial early attachment was investigated at 4 hrs. Biofilm colony-forming units (CFU) were measured after 2 days. With CL increasing from 3 to 16, the minimum inhibitory concentration and minimum bactericidal concentration were decreased by 5 orders of magnitude. Incorporating QAMs into SBMP reduced bacterial early attachment, with the least colonization at CL = 16. Biofilm CFU for CL = 16 was 4 log lower than SBMP control (p < .05). All groups had similar dentin bond strengths (p > .1). The new antibacterial materials had fibroblast/odontoblast viability similar to that of commercial controls. In conclusion, increasing the chain length of new QAMs in bonding agents greatly increased the antibacterial efficacy. A reduction in Streptococcus mutans biofilm CFU by 4 log could be achieved, without compromising bond strength and cytotoxicity. New QAM-containing bonding agents are promising for a wide range of restorations to inhibit biofilms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Increasing the alkyl chain length and quaternary amine charge density of dentin bonding agent resin greatly enhanced antibacterial and anti-biofilm activity without compromising dentin bond strength.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [68]
Experimental — accuracy not yet measuredIn the citing paper
“In the investigation of the structure-property relationship of QACs [67], [68], those with a chain length of 12 or 16 were found to possess higher antibacterial potency.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [68]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of saliva: Normal composition, flow, and function
Humphrey, S. P., & Williamson, R. T. (2001) · The Journal of Prosthetic Dentistry · doi:10.1067/mpr.2001.113778 · Cited by 2,400 · cited 1×
“Human saliva flow is 1,000 to 1,500 mL/ day (Humphrey and Williamson, 2001).”
BackgroundResin composite—State of the art
Ferracane, J. L. (2011) · Dental Materials · doi:10.1016/j.dental.2010.10.020 · Cited by 2,188 · cited 1×
“Composites are the principal materials for tooth-cavity restorations (Ferracane, 2011) which are bonded in cavities via adhesives (Ferracane et al., 2010; Spencer et al., 2010; Pashley et al., 2011).”
BackgroundDesigning surfaces that kill bacteria on contact
Tiller, J. C., Liao, C.-J., Lewis, K., & Klibanov, A. M. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.111143098 · Cited by 1,196 · cited 5×
“Sample absorbance was measured at 501 nm (Tiller et al., 2001).”
BackgroundMethodInfluentialState of the art etch-and-rinse adhesives
Pashley, D. H., Tay, F. R., Breschi, L., Tjäderhane, L., Carvalho, R. M., Carrilho, M., & Tezvergil-Mutluay, A. (2011) · Dental Materials · doi:10.1016/j.dental.2010.10.016 · Cited by 1,105 · cited 1×
“Composites are the principal materials for tooth-cavity restorations (Ferracane, 2011) which are bonded in cavities via adhesives (Ferracane et al., 2010; Spencer et al., 2010; Pashley et al., 2011).”
BackgroundThe global increase in dental caries. A pending public health crisis.
Er, B., Garcı́a-Godoy, F., & Volpe, A. R. (2009) · PubMed · Cited by 730
Murata, H., Koepsel, R. R., Matyjaszewski, K., & Russell, A. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.012 · Cited by 722 · cited 1×
“Long cationic polymers can penetrate bacterial cells to disrupt membranes, like a needle bursting a balloon (Tiller et al., 2001; Murata et al., 2007).”
BackgroundStructures of Novel Antimicrobial Agents for Textiles - A Review
Simoncic, B., & Tomsic, B. (2010) · Textile Research Journal · doi:10.1177/0040517510363193 · Cited by 604 · cited 3×
“…activity relies solely on a positively charged ammonium group coupling with a negatively charged bacterial membrane to disrupt membrane functions, alter the balance of essential ions (i.e., K+, Na+, Ca2+, and Mg2+), interrupt protein activity, and damage bacterial DNA (Simoncic and Tomcis, 2010).”
BackgroundInfluentialBeyth, N., Yudovin-Farber, I., Bahir, R., Domb, A. J., & Weiss, E. I. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.03.003 · Cited by 470 · cited 3×
“Quaternary ammonium can cause bacteria lysis by binding to membranes (Beyth et al., 2006).”
BackgroundAdhesive/Dentin Interface: The Weak Link in the Composite Restoration
Spencer, P., Ye, Q., Park, J., Topp, E. M., Misra, A., Marangos, O., Wang, Y., Bohaty, B. S., Singh, V., Sene, F., et al. (2010) · Annals of Biomedical Engineering · doi:10.1007/s10439-010-9969-6 · Cited by 470 · cited 1×
“Composites are the principal materials for tooth-cavity restorations (Ferracane, 2011) which are bonded in cavities via adhesives (Ferracane et al., 2010; Spencer et al., 2010; Pashley et al., 2011).”
BackgroundAntibacterial properties of resin composites and dentin bonding systems
Imazato, S. (2003) · Dental Materials · doi:10.1016/s0109-5641(02)00102-1 · Cited by 447
(2000) · PubMed · Cited by 390
Cheng, L., Weir, M. D., Xu, H. H. K., Antonucci, J. M., Kraigsley, A. M., Lin, N. J., Lin-Gibson, S., & Zhou, X. (2012) · Dental Materials · doi:10.1016/j.dental.2012.01.005 · Cited by 354 · cited 4×
“The 2-day biofilms on disks were harvested by sonicating/vortexing, serially diluted, and spread onto agar plates for CFU analysis (Cheng et al., 2012b).”
BackgroundMethodInfluentialSelf-citationAntonucci, J. M., Zeiger, D. N., Tang, K., Lin-Gibson, S., Fowler, B. O., & Lin, N. J. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.004 · Cited by 287 · cited 4×
“With a ratio of 1:1 for fluorescein molecules to accessible quaternary ammonium groups, the surface charge density was calculated as the total molecules of charge/surface (sum of top, bottom, and side areas of disks) (Antonucci et al., 2012).”
BackgroundMethodInfluentialBiofilms, a new approach to the microbiology of dental plaque
ten Cate, J. M. (2006) · Odontology · doi:10.1007/s10266-006-0063-3 · Cited by 263 · cited 2×
“Caries is a dietary carbohydrate-modified bacterial infectious disease caused by biofilm acids (ten Cate, 2006).”
BackgroundLin, J., Qiu, S., Lewis, K., & Klibanov, A. M. (2002) · Biotechnology Progress · doi:10.1021/bp025597w · Cited by 251 · cited 1×
“A previous study revealed that long polymeric chains with positive charges and hydrophobicity effectively killed bacteria (Lin et al., 2002).”
BackgroundAntibacterial activity of dentine primer containing MDPB after curing
Imazato, S., Ehara, A., Torii, M., & Ebisu, S. (1998) · Journal of Dentistry · doi:10.1016/s0300-5712(97)00013-4 · Cited by 202 · cited 3×
“and agitated for 1 hr to remove uncured monomers (Imazato et al., 1998), then sterilized with ethylene oxide (AN-74i,”
BackgroundMethodPreparation and evaluation of a novel glass-ionomer cement with antibacterial functions
Xie, D., Weng, Y., Guo, X., Zhao, J., Gregory, R. L., & Zheng, C. (2011) · Dental Materials · doi:10.1016/j.dental.2011.02.006 · Cited by 188 · cited 3×
“Indeed, a recent study on glass ionomers showed stronger antibacterial activity with longer chain length (Xie et al., 2011).”
BackgroundAnti-biofilm dentin primer with quaternary ammonium and silver nanoparticles
Cheng, L., Zhang, K., Melo, M. A. S., Weir, M. D., Zhou, X., & Xu, H. H. K. (2012) · Journal of Dental Research · doi:10.1177/0022034512444128 · Cited by 183
Self-citationLi, F., Chen, J., Chai, Z., Zhang, L., Xiao, Y., Fang, M., & Ma, S. (2009) · Journal of Dentistry · doi:10.1016/j.jdent.2008.12.004 · Cited by 182 · cited 4×
“When QAM is incorporated into resin, upon photo-polymerization the QAM is copolymerized by forming covalent bonds with the polymer network (Imazato, 2003; Li et al., 2009; Antonucci et al., 2012).”
BackgroundMethodInfluentialZhang, K., Melo, M. A. S., Cheng, L., Weir, M. D., Bai, Y., & Xu, H. H. K. (2012) · Dental Materials · doi:10.1016/j.dental.2012.04.027 · Cited by 181 · cited 2×
“SBMP adhesive also contained 10% QAM (Zhang et al., 2012).”
BackgroundSelf-citationEvaluation of bacterial adhesion of Streptococcus mutans on dental restorative materials
Montanaro, L., Campoccia, D., Rizzi, S., Donati, M. E., Breschi, L., Prati, C., & Arciola, C. R. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.11.031 · Cited by 169 · cited 2×
“An incubation time of 4 hrs was chosen to test the early attachment and contact-killing effects, because the initial biofilm formation in oral cavity usually occurred in 2 to 4 hrs (Montanaro et al., 2004).”
BackgroundMethodSakaguchi, R. L. (2005) · Dental Materials · doi:10.1016/j.dental.2004.10.008 · Cited by 168 · cited 1×
“secondary caries is a primary reason for dental restoration failure (Mjör and Toffeneti, 2000; Sakaguchi, 2005).”
BackgroundCheng, L., Weir, M. D., Zhang, K., Arola, D. D., Zhou, X., & Xu, H. H. K. (2013) · Journal of Dentistry · doi:10.1016/j.jdent.2013.01.004 · Cited by 164 · cited 2×
“This yielded DMADDM as a clear liquid, which was verified via Fourier transform infrared spectroscopy (Cheng et al., 2013).”
MethodSelf-citationAntibacterial effect of bactericide immobilized in resin matrix
Namba, N., Yoshida, Y., Nagaoka, N., Takashima, S., Matsuura-Yoshimoto, K., Maeda, H., Van Meerbeek, B., Suzuki, K., & Takashiba, S. (2009) · Dental Materials · doi:10.1016/j.dental.2008.08.012 · Cited by 158
Minimally invasive management of dental caries
Lynch, C. D., FRAZIER, K. B., McConnell, R. J., Blum, I. R., & WILSON, N. H. F. (2011) · The Journal of the American Dental Association · doi:10.14219/jada.archive.2011.0243 · Cited by 155 · cited 1×
“Antibacterial primers/adhesives would be especially useful for minimal-intervention dentistry with less removal of tooth structures (Lynch et al., 2011), which could leave behind more bacteria and carious tissues in the tooth cavity.”
BackgroundEconomic Impact of Regulating the Use of Amalgam Restorations
Beazoglou, T., Eklund, S., Heffley, D., Meiers, J., Brown, L. J., & Bailit, H. (2007) · Public Health Reports® · doi:10.1177/003335490712200513 · Cited by 151 · cited 1×
“Secondary caries is the main reason for restoration failures, costing tens of billions of dollars annually (Beazoglou et al., 2007).”
BackgroundSynthesis and characterization of antibacterial dental monomers and composites
Xu, X., Wang, Y., Liao, S., Wen, Z. T., & Fan, Y. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32683 · Cited by 144 · cited 1×
“Indeed, previous studies investigated the copolymerization of quaternary ammonium methacrylates (QAMs) to develop antibacterial resins (Imazato, 2003; Li et al., 2009; Xie et al., 2011; Antonucci et al., 2012; Xu et al., 2012; Zhang et al., 2012).”
BackgroundBactericidal activity and cytotoxicity of antibacterial monomer MDPB
Imazato, S., Ebi, N., Tarumi, H., Russell, R. R. B., Kaneko, T., & Ebisu, S. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00247-6 · Cited by 143 · cited 4×
“Each monomer, except BisGMA, was dissolved in medium at concentrations of: 0, 0.5, 1, 2, 5, 10, 20, 40, 60, and 100 μg/mL (Imazato et al., 1999).”
BackgroundMethodInfluentialZhang, K., Cheng, L., Wu, E. J., Weir, M. D., Bai, Y., & Xu, H. H. K. (2013) · Journal of Dentistry · doi:10.1016/j.jdent.2013.03.011 · Cited by 109 · cited 2×
“aging, which indicated copolymerization (Zhang et al., 2013), further study is needed to investigate how well QAMs were copolymerized in bonding agents.”
BackgroundHuang, L., Xiao, Y.-H., Xing, X.-D., Li, F., Ma, S., Qi, L.-L., & Chen, J.-H. (2011) · Archives of Oral Biology · doi:10.1016/j.archoralbio.2010.10.011 · Cited by 103 · cited 4×
“Cells were cultured for 48 hrs, and the viability was measured via the MTT assay (Huang et al., 2011).”
BackgroundMethodInfluentialAn Audit on the Placement and Replacement of Restorations in a General Dental Practice
Frost, P. M. (2002) · Primary Dental Care · doi:10.1308/135576102322547548 · Cited by 74 · cited 1×
“Replacing failed restorations accounts for 50% to 70% of all restorations performed (Frost, 2002; Bagramian et al., 2009).”
BackgroundDegree of conversion of resin blends in relation to ethanol content and hydrophilicity
Cadenaro, M., Breschi, L., Antoniolli, F., Navarra, C. O., Mazzoni, A., Tay, F. R., Lenarda, R. D., & Pashley, D. H. (2008) · Dental Materials · doi:10.1016/j.dental.2008.01.012 · Cited by 70 · cited 1×
“With a short CL, the adhesive would be more hydrophilic, slightly compromising its conversion degree (Cadenaro et al., 2008).”
BackgroundHiraishi, N., Yiu, C. K. Y., King, N. M., & Tay, F. R. (2010) · Journal of Dentistry · doi:10.1016/j.jdent.2010.03.005 · Cited by 68 · cited 1×
“Therefore, it is beneficial for primer/ adhesive to be antibacterial (Imazato et al., 1998; Imazato, 2003; Li et al., 2009; Hiraishi et al., 2010; Cheng et al., 2012b).”
BackgroundLi, F., Liu, X., Zhang, L., Kang, J.-J., & Chen, J. (2012) · PubMed · doi:10.3290/j.jad.a21853 · Cited by 58 · cited 2×
“After storage in water at 37°C for 24 hrs, each tooth was vertically sectioned into 0.9 x 0.9 mm composite-dentin beams (Li et al., 2012).”
BackgroundMethodInfluentialLin, N. J., Cheng, L., Weir, M. D., Xu, H. H. K., Antonucci, J. M., Kraigsley, A. M., Lin‐Gibson, S., & Zhou, X. (2012) · Dental Materials · Cited by 24
Introduction to and outcomes of the conference on adhesion in dentistry
Ferracane, J. L., Hilton, T. J., & Sakaguchi, R. L. (2010) · Dental Materials · doi:10.1016/j.dental.2009.12.003 · Cited by 19 · cited 1×
“Composites are the principal materials for tooth-cavity restorations (Ferracane, 2011) which are bonded in cavities via adhesives (Ferracane et al., 2010; Spencer et al., 2010; Pashley et al., 2011).”
Background
Cited by
Jiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
Antibacterial quaternary ammonium compounds in dental materials: A systematic review
Makvandi, P., Jamaledin, R., Jabbari, M., Nikfarjam, N., & Borzacchiello, A. (2018) · Dental Materials · doi:10.1016/j.dental.2018.03.014 · Cited by 333
Advanced smart biomaterials and constructs for hard tissue engineering and regeneration
Zhang, K., Wang, S., Zhou, C., Cheng, L., Gao, X., Xie, X., Sun, J., Wang, H., Weir, M. D., Reynolds, M. A., et al. (2018) · Bone Research · doi:10.1038/s41413-018-0032-9 · Cited by 317
Antibacterial surface design – Contact kill
Kaur, R., & Liu, S. (2016) · Progress in Surface Science · doi:10.1016/j.progsurf.2016.09.001 · Cited by 305
Advancing antimicrobial strategies for managing oral biofilm infections
Jiao, Y., Tay, F. R., Niu, L.-N., & Chen, J.-H. (2019) · International Journal of Oral Science · doi:10.1038/s41368-019-0062-1 · Cited by 280
“In an investigation of the structure–property relationship of QAMs, those with a chain length of 12 or 16 were found to possess higher antibacterial potency.(41) Moreover, changing the position of the functional groups in QAMs alters their anti-caries effects after their incorporation into dental resin.”
Background
Metadata
- Authors
- Li, F., Weir, M. D., & Xu, H. H. K.
- Affiliations
- University of Maryland, Baltimore (US)
- ORCID
- Venue
- Journal of Dental Research
- Publisher
- SAGE Publications
- Published
- 2013-10
- Volume
- 92
- Issue
- 10
- Pages
- 932-938
- ISSN
- 0022-0345 (ISSN-L)
- 1544-0591
- PMC
- PMC3775374
- OpenAlex
- W2124945708
- Cited by
- 230
- References
- 36
- Citations by year
- 2026: 12 · 2025: 22 · 2024: 19 · 2023: 15 · 2022: 19 · 2021: 28 · 2020: 27 · 2019: 22 · 2018: 21 · 2017: 19 · 2016: 14 · 2015: 7 · 2014: 5
- FWCI
- 11.94
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Dental Research (publishedVersion)
- Europe PMC (PubMed Central) (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Funders
- University of Michigan
- National Natural Science Foundation of China (R01DE17974, 81100772)
- National Institutes of Health
- School of Dentistry, University of Maryland (R01 DE17974)
- National Institute of Dental and Craniofacial Research (R01DE017974)
- Topics
- Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Health Sciences › Dentistry › Periodontics › Oral microbiology and periodontitis research
- Keywords
- quaternary ammonium methacrylate, alkyl chain length, dentin bonding, Streptococcus mutans, dental plaque, minimum inhibitory concentration, minimum bactericidal concentration, cytotoxicity, fibroblast viability, dentin bond strength
- MeSH terms
- Quaternary Ammonium Compounds, Anti-Bacterial Agents, Bacterial Adhesion, Cell Survival, Fibroblasts, Materials Testing, Odontoblasts, Streptococcus mutans, Colony Count, Microbial, Dentin-Bonding Agents, Biofilms, Resin Cements
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.