The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Cable manipulation with a tactile-reactive gripper
Open accessAbstract
Cables are complex, high-dimensional, and dynamic objects. Standard approaches to manipulate them often rely on conservative strategies that involve long series of very slow and incremental deformations, or various mechanical fixtures such as clamps, pins, or rings. We are interested in manipulating freely moving cables, in real time, with a pair of robotic grippers, and with no added mechanical constraints. The main contribution of this paper is a perception and control framework that moves in that direction, and uses real-time tactile feedback to accomplish the task of following a dangling cable. The approach relies on a vision-based tactile sensor, GelSight, that estimates the pose of the cable in the grip, and the friction forces during cable sliding. We achieve the behavior by combining two tactile-based controllers: (1) cable grip controller, where a PD controller combined with a leaky integrator regulates the gripping force to maintain the frictional sliding forces close to a suitable value; and (2) cable pose controller, where an linear–quadratic regulator controller based on a learned linear model of the cable sliding dynamics keeps the cable centered and aligned on the fingertips to prevent the cable from falling from the grip. This behavior is possible with the use of reactive gripper fitted with GelSight-based high-resolution tactile sensors. The robot can follow 1 m of cable in random configurations within two to three hand regrasps, adapting to cables of different materials and thicknesses. We demonstrate a robot grasping a headphone cable, sliding the fingers to the jack connector, and inserting it. To the best of the authors’ knowledge, this is the first implementation of real-time cable following without the aid of mechanical fixtures. Videos are available at http://gelsight.csail.mit.edu/cable/
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Probabilistic roadmaps for path planning in high-dimensional configuration spaces
Kavraki, L. E., Svestka, P., Latombe, J.-C., & Overmars, M. H. (1996) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.508439 · Cited by 6,343 · cited 1×
“Motion planning for DLOs has traditionally used sampling-based approaches such as a probabilistic roadmap (PRM) (Kavraki et al., 1996) or Rapidly-exploring Random Trees (RRTs) (LaValle, 1998).”
MethodLearning from Demonstrations Through the Use of Non-rigid Registration
Schulman, J., Ho, J., Lee, C., & Abbeel, P. (2016) · Springer Tracts in Advanced Robotics · doi:10.1007/978-3-319-28872-7_20 · Cited by 133
Learning Rope Manipulation Policies Using Dense Object Descriptors Trained on Synthetic Depth Data
Sundaresan, P., Grannen, J., Thananjeyan, B., Balakrishna, A., Laskey, M., Stone, K., Gonzalez, J. E., & Goldberg, K. (2020) · 2020 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra40945.2020.9197121 · Cited by 107
A case study of flexible object manipulation
Hopcroft, J. E., Kearney, J. K., & Krafft, D. B. (1991) · The International Journal of Robotics Research · doi:10.1177/027836499101000105 · Cited by 82
VisuoSpatial Foresight for Multi-Step, Multi-Task Fabric Manipulation
Hoque, R., Seita, D., Balakrishna, A., Ganapathi, A., Tanwani, A., Jamali, N., Yamane, K., Iba, S., & Goldberg, K. (2020) · Robotics: Science and Systems XVI · doi:10.15607/rss.2020.xvi.034 · Cited by 74
(2003) · doi:10.1109/robot.2003.1242193 · Cited by 73
Motion planning for dynamic knotting of a flexible rope with a high-speed robot arm
Yamakawa, Y., Namiki, A., & Ishikawa, M. (2010) · 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2010.5651168 · Cited by 57
Cited by
Challenges and Outlook in Robotic Manipulation of Deformable Objects
Zhu, J., Cherubini, A., Dune, C., Navarro-Alarcon, D., Alambeigi, F., Berenson, D., Ficuciello, F., Harada, K., Kober, J., Li, X., et al. (2022) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2022.3147415 · Cited by 265
Untangling Dense Non-Planar Knots by Learning Manipulation Features and Recovery Policies
Sundaresan*, P., Grannen*, J., Thananjeyan, B., Balakrishna, A., Ichnowski, J., Novoseller, E., Hwang, M., Laskey, M., Gonzalez, J., & Goldberg, K. (2021) · Robotics: Science and Systems XVII · doi:10.15607/rss.2021.xvii.013 · Cited by 26
A Perspective on Open Challenges in Deformable Object Manipulation
McKennaa, R. P., & Oyekan, J. (2026) · arXiv · doi:10.48550/arxiv.2602.22998 · Cited by 1
“One application is cable or fabric following; for example, She et al. [43] developed a technique to estimate the position and friction of a cable held by a robot using GelSight-based tactile sensing.”
Metadata
- Authors
- She, Y., Wang, S., Dong, S., Sunil, N., Rodriguez, A., & Adelson, E.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 2021-08-06
- Volume
- 40
- Issue
- 12-14
- Pages
- 1385-1401
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W3192021195
- Cited by
- 242
- References
- 7
- FWCI
- 19.09
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cable manipulation with a tactile-reactive gripper. https://app.cochat.ai/papers/10.1177/02783649211027233
- The paper
- She, Y., Wang, S., Dong, S., Sunil, N., Rodriguez, A., & Adelson, E. (2021). Cable manipulation with a tactile-reactive gripper. The International Journal of Robotics Research. https://doi.org/10.1177/02783649211027233
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.