The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Effect of Surface Wettability and Topography on the Adhesion of Osteosarcoma Cells on Plasma-modified Polystyrene
Abstract
Biomaterials interact with the biological environment at their surface, making accurate biophysical characterization of the surface crucially important for understanding subsequent biological effects. In this study, the surface of polystyrene (PS) was systematically altered in order to determine the effect of plasma treatment and surface roughness on cell adhesion and spreading. Surfaces with water contact angle from hydrophilic (12°) to superhydrophobic (155°) were obtained through a combination of modifying surface roughness ( R a), the deposition of siloxane coatings and the fluorination of the PS surface. R a values in the range of 19—2365 nm were obtained by grinding the PS surface. The nanometer-thick siloxane coatings were deposited using an atmospheric pressure plasma system, while the fluorination of the PS was carried out using a low-pressure radio frequency (RF) plasma. The siloxane coatings were obtained using a liquid poly(dimethylsiloxane) precursor that was nebulized into helium or helium/oxygen plasmas. Water contact angles in the range of 12—122° were obtained with these coatings. Cell adhesion studies were carried out using human MG63 osteosarcoma cells. It was observed that higher polymer surface roughness enhanced cell adhesion, but had a negative effect on cell spreading. Optimum cell adhesion was observed at ∼64° for the siloxane coatings, with a decrease in adhesion observed for the more hydrophilic and hydrophobic coatings. This decrease in cell adhesion with an increase in hydrophobicity was also observed for the fluorinated PS surfaces with water contact angles in the range of 110—155°.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Osteoblast adhesion on biomaterials
Anselme, K. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00242-2 · Cited by 2,500
Plasma-surface modification of biomaterials
Chu, P. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00004-9 · Cited by 1,578
Role of material surfaces in regulating bone and cartilage cell response
Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331
Plasma sterilization. Methods and mechanisms
Moisan, M., Barbeau, J., Crevier, M.-C., Pelletier, J., Philip, N., & Saoudi, B. (2002) · Pure and Applied Chemistry · doi:10.1351/pac200274030349 · Cited by 616
Nantotechniques and approaches in biotechnology
Curtis, A., & Wilkinson, C. (2001) · Trends in Biotechnology · doi:10.1016/s0167-7799(00)01536-5 · Cited by 499
Interaction of Different Types of Cells on Polymer Surfaces with Wettability Gradient
Lee, J. H., Khang, G., Lee, J. W., & Lee, H. B. (1998) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1998.5688 · Cited by 482
Suggested guidelines for the topographic evaluation of implant surfaces.
Wennerberg, A., & Albrektsson, T. O. (2000) · PubMed · Cited by 462
Hydrophobicity recovery of polydimethylsiloxane after exposure to corona discharges
Hillborg, H., & Gedde, U. W. (1998) · Polymer · doi:10.1016/s0032-3861(97)00484-9 · Cited by 430
Cooper, L. F., Zhou, Y., Takebe, J., Guo, J., Abron, A., Holmén, A., & Ellingsen, J. E. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.009 · Cited by 390
Compatibility of Mammalian Cells on Surfaces of Poly(dimethylsiloxane)
Lee, J. N., Jiang, X., Ryan, D., & Whitesides, G. M. (2004) · Langmuir · doi:10.1021/la048562+ · Cited by 379
Cited by
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
Superhydrophobic materials for biomedical applications
Falde, E. J., Yohe, S. T., Colson, Y. L., & Grinstaff, M. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.050 · Cited by 468
Metwally, S., & Stachewicz, U. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109883 · Cited by 382
The Evolution of Polystyrene as a Cell Culture Material
Lerman, M. J., Lembong, J., Muramoto, S., Gillen, G., & Fisher, J. P. (2018) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2018.0056 · Cited by 258
Mammalian Cell Behavior on Hydrophobic Substrates: Influence of Surface Properties
Ferrari, M., Cirisano, F., & Morán, M. C. (2019) · Colloids and Interfaces · doi:10.3390/colloids3020048 · Cited by 227
Metadata
- Authors
- Dowling, D. P., Miller, I. S., Ardhaoui, M., & Gallagher, W. M.
- Venue
- Journal of Biomaterials Applications
- Publisher
- SAGE Publications
- Published
- 2010-06-21
- Volume
- 26
- Issue
- 3
- Pages
- 327-347
- ISSN
- 0885-3282 (ISSN-L)
- 1530-8022
- OpenAlex
- W1975135314
- Cited by
- 376
- References
- 35
- FWCI
- 3.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Surface Wettability and Topography on the Adhesion of Osteosarcoma Cells on Plasma-modified Polystyrene. https://app.cochat.ai/papers/10.1177/0885328210372148
- The paper
- Dowling, D. P., Miller, I. S., Ardhaoui, M., & Gallagher, W. M. (2011). Effect of Surface Wettability and Topography on the Adhesion of Osteosarcoma Cells on Plasma-modified Polystyrene. Journal of Biomaterials Applications. https://doi.org/10.1177/0885328210372148
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.