Suitability of a PLCL fibrous scaffold for soft tissue engineering applications: A combined biological and mechanical characterisation
Open accessThe DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Abstract
Poly(lactide-co-ε-caprolactone) (PLCL) has been reported to be a good candidate for tissue engineering because of its good biocompatibility. Particularly, a braided PLCL scaffold (PLL/PCL ratio = 85/15) has been recently designed and partially validated for ligament tissue engineering. In the present study, we assessed the in vivo biocompatibility of acellular and cellularised scaffolds in a rat model. We then determined its in vitro biocompatibility using stem cells issued from both bone marrow and Wharton Jelly. From a biological point of view, the scaffold was shown to be suitable for tissue engineering in all these cases. Secondly, while the initial mechanical properties of this scaffold have been previously reported to be adapted to load-bearing applications, we studied the evolution in time of the mechanical properties of PLCL fibres due to hydrolytic degradation. Results for isolated PLCL fibres were extrapolated to the fibrous scaffold using a previously developed numerical model. It was shown that no accumulation of plastic strain was to be expected for a load-bearing application such as anterior cruciate ligament tissue engineering. However, PLCL fibres exhibited a non-expected brittle behaviour after two months. This may involve a potential risk of premature failure of the scaffold, unless tissue growth compensates this change in mechanical properties. This combined study emphasises the need to characterise the properties of biomaterials in a pluridisciplinary approach, since biological and mechanical characterisations led in this case to different conclusions concerning the suitability of this scaffold for load-bearing applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Lemaitre, J., & Chaboche, J.-L. (1990) · Cambridge University Press eBooks · doi:10.1017/cbo9781139167970 · Cited by 2,418
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.004 · Cited by 814
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Keun Kwon, I., Kidoaki, S., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.007 · Cited by 607
A critical review on polymer-based bio-engineered materials for scaffold development
Cheung, H.-Y., Lau, K.-T., Lu, T.-P., & Hui, D. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.06.014 · Cited by 531
Biomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Prasanna, S. J., Gopalakrishnan, D., Shankar, S. R., & Vasandan, A. B. (2010) · PLoS ONE · doi:10.1371/journal.pone.0009016 · Cited by 467
Anterior cruciate ligament strain in-vivo: A review of previous work
Beynnon, B. D., & Fleming, B. C. (1998) · Journal of Biomechanics · doi:10.1016/s0021-9290(98)00044-x · Cited by 399
Mechanical study of PLA–PCL fibers during in vitro degradation
Vieira, A. C., Vieira, J. C., Ferra, J. M., Magalhães, F. D., Guedes, R. M., & Marques, A. T. (2011) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2010.12.006 · Cited by 266
Research works printed but not linked: 1
- 10.1002/(SICI)1097-4636(199701)34:1<39::AID-JBM6>3.0.CO;2-O · DOI · Paper page
Cited by
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Vascular Tissue Engineering: Polymers and Methodologies for Small Caliber Vascular Grafts
Leal, B. B. J., Wakabayashi, N., Oyama, K., Kamiya, H., Braghirolli, D. I., & Pranke, P. (2021) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2020.592361 · Cited by 191
Review of Synthetic and Hybrid Scaffolds in Cartilage Tissue Engineering
Wasyłeczko, M., Sikorska, W., & Chwojnowski, A. (2020) · Membranes · doi:10.3390/membranes10110348 · Cited by 182
Zhao, J., & Feng, Y. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000920 · Cited by 112
Wang, J., Wang, H., Mo, X., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.202004555 · Cited by 93
Metadata
- Authors
- Laurent, C. P., Vaquette, C., Liu, X., Schmitt, J.-F., & Rahouadj, R.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Queensland University of Technology (AU)
- Corresponding author
- Laurent, Cédric P
- Venue
- Journal of Biomaterials Applications
- Publisher
- SAGE Publications
- Published
- 2018-02-06
- Volume
- 32
- Issue
- 9
- Pages
- 1276-1288
- ISSN
- 0885-3282 (ISSN-L)
- 1530-8022
- OpenAlex
- W2792606113
- Semantic Scholar
- 340c5b6667e10471d483abfef3ac483cbc569aa8
- Cited by
- 49
- References
- 56
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 8 · 2023: 6 · 2022: 5 · 2021: 8 · 2020: 8 · 2019: 7 · 2018: 3
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- green
- hal.univ-lorraine.fr
- Licence
- other-oa
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Biomaterials Applications (publishedVersion)
- PubMed (publishedVersion)
- QUT ePrints (Queensland University of Technology) (submittedVersion)
- HAL (submittedVersion, other-oa)
- Griffith Research Online (submittedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- ligament tissue engineering, anterior cruciate ligament, in vivo biocompatibility, bone marrow-derived stem cells, Wharton's jelly stem cells, hydrolytic degradation, mechanical properties, plastic strain accumulation, brittleness, load-bearing applications, numerical modeling
- MeSH terms
- Animals, Biocompatible Materials, Cells, Cultured, Humans, Hydrolysis, Materials Testing, Polyesters, Rats, Nude, Tensile Strength, Tissue Engineering, Mesenchymal Stem Cell Transplantation, Tissue Scaffolds, Mesenchymal Stem Cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Suitability of a PLCL fibrous scaffold for soft tissue engineering applications: A combined biological and mechanical characterisation. https://app.cochat.ai/papers/10.1177/0885328218757064
- The paper
- Laurent, C. P., Vaquette, C., Liu, X., Schmitt, J.-F., & Rahouadj, R. (2018). Suitability of a PLCL fibrous scaffold for soft tissue engineering applications: A combined biological and mechanical characterisation. Journal of Biomaterials Applications. https://doi.org/10.1177/0885328218757064
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.