A review of processing strategies to generate melt-blown nano/microfiber mats for high-efficiency filtration applications
Open accessThe DOI matches its Crossref record; 134 of the 152 references it cites were found in a registry or an index.
Abstract
Protective masks – worn properly - have become the key to wither away the COVID-19 pandemic. Nowadays, the vast majority of these masks are made of nonwoven fabrics. High-quality products have mainly melt-blown filtering layers of nano/microfiber. Melt blowing produces very fine synthetic nonwovens from a wide range of polymers and allows a fair control of the fiber structure and morphology that makes it ideal for filtration purposes. Melt blowing has a high throughput, and the low price of the filter makes these products widely available for civil use. Although melt-blown fiber applications were rapidly growing in the last three decades, we still have limited knowledge on the processing parameters. In this regard, we detailed the melt blowing parameters to obtain a filter media with high particle capturing efficiency and a low-pressure drop. We summarized the melt-blown fiber mat characteristics with specific attention to the pore size, the porosity, the fiber diameter, the fiber packing density and the air permeability desired for highly efficient filtration. Even though we cannot estimate the future social effects and the trauma caused by the current pandemic, and protective masks might remain a part of everyday life for a long while. That also implies that near-future investments in wider manufacturing capacities seem inevitable. This paper also aims to facilitate masks' production with improved filtration efficiency by reviewing the recent developments in melt blowing, the related applications, the effects of processing parameters on the structure and performance of the nonwoven products focusing on the filtration efficiency via knowledge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This throughput is comparable to those of melt-blowing processes (27) but is orders of magnitude greater (~106) than that of 3D extrusion printing, the speed of which declines rapidly at single-micrometer features (as a power law, with a scaling factor of ~2.8) (Fig. 4, D and E, and eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [27]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
null (2016) · Philosophy Study · doi:10.17265/2159-5313/2016.09.003 · Cited by 28,317
Presumed Asymptomatic Carrier Transmission of COVID-19
Bai, Y., Yao, L., Wei, T., Tian, F., Jin, D.-Y., Chen, L., & Wang, M. (2020) · JAMA · doi:10.1001/jama.2020.2565 · Cited by 4,498 · cited 1×
“In addition to these, MB nonwovens can also be utilized in a wide range of applications including drug delivery, membrane separation, battery separators, skin and wound dressing and reinforced composite materials [10–16] and they play a crucial role in the fight against the Severe acute respiratory syndrome coronaviru…”
BackgroundCOVID-19 infection: Emergence, transmission, and characteristics of human coronaviruses
Shereen, M. A., Khan, S., Kazmi, A., Bashir, N., & Siddique, R. (2020) · Journal of Advanced Research · doi:10.1016/j.jare.2020.03.005 · Cited by 3,536
What does the COVID-19 pandemic teach us about global value chains? The case of medical supplies
Gereffi, G. (2020) · Journal of International Business Policy · doi:10.1057/s42214-020-00062-w · Cited by 888 · cited 1×
“In addition to these, MB nonwovens can also be utilized in a wide range of applications including drug delivery, membrane separation, battery separators, skin and wound dressing and reinforced composite materials [10–16] and they play a crucial role in the fight against the Severe acute respiratory syndrome coronaviru…”
BackgroundMelt blown nanofibers: Fiber diameter distributions and onset of fiber breakup
Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W., & Bates, F. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.005 · Cited by 497 · cited 2×
“Violent vibrations can cause fiber breakage, shots and sticking [73].”
BackgroundBałazy, A., Toivola, M., Adhikari, A., Sivasubramani, S. K., Reponen, T., & Grinshpun, S. A. (2006) · American Journal of Infection Control · doi:10.1016/j.ajic.2005.08.018 · Cited by 376 · cited 1×
“Thus, at least N95, KN95, FFP2 or equivalent respirators are recommended for the protection against the airborne viruses such as the SARS-CoV-2 new coronavirus for those in high risk environments [30,37].”
BackgroundFabrication of nanofiber meltblown membranes and their filtration properties
Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.050 · Cited by 267
Fundamentals and Applications of Micro- and Nanofibers
Yarin, A. L., Pourdeyhimi, B., & Ramakrishna, S. (2014) · Cambridge University Press eBooks · doi:10.1017/cbo9781107446830 · Cited by 233
Electrospun ultrafine fibers for advanced face masks
Zhang, Z., Ji, D., He, H., & Ramakrishna, S. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100594 · Cited by 180
Meltblown fibers: Influence of viscosity and elasticity on diameter distribution
Tan, D. H., Zhou, C., Ellison, C. J., Kumar, S., Macosko, C. W., & Bates, F. S. (2010) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2010.04.012 · Cited by 151 · cited 1×
“[109] reported that increasing airflow rate from �147 l/min to �272 l/min increased the CV of fiber diameter from 10% to 20% while the fiber diameter decreased around 40%.”
Background
Research works printed but not linked: 11
- 4. Bhat G and Malkan S. Polymer-laid web formation. In: Russell SJ (ed) Handbook of nonwovens . Cambridge (UK), 2007, pp.180-182.
- 5. Yesil Y and Bhat GS. Porosity and barrier properties of polyethylene meltblown nonwovens. The Journal of the Textile Institute 2017; 108: 1035-1040.
- 43. Abd El-Hamied AE-HA. Investigation of Loaded Fibrous Filter. Periodica Polytechnica Mechanical Engineering 1997; 41: 3-20. DOI: N/A.
- 54. Gombos Z. Analysis of glass fiber mat structures and their impact on the resin absorption process and on the characteristics of composites . Budapest University of Technology and Economics, Budapest, 2010.
- 88. L., Pourdeyhimi B. and Ramakrishna S. (eds) nanofibers . UK: Cambridge University Press 2013 pp.90-92
- 93. Jones A. M. A Study of Resin Melt Flow Rate And Polydispersity Effects On The Mechanical Properties of Melt Blown Polypropylene Webs. In: Fourth International Conference on Polypropylene Fibers and Textiles Nottingham (UK), September 23 -25 1987
- 97. Zhang D, Sun C, Beard J, et al. Development and characterization of poly (trimethylene terephthalate)-based bicomponent meltblown nonwovens. Journal of Applied Polymer Science 2002; 83: 1280-1287.
- 113. Bresee RR, Qureshi A and Pelham MC. Influence of processing conditions on melt blown web structure: part 2-primary airflow rate. International Nonwovens Journal 2005: 1558925005os-1551400202.
- 117. Jirsák O. and Wadsworth L.C. Nonwoven Textiles . USA: Carolina Academic Press, 1999.
- 137. Willeke K and Macher J. Bioaerosols: assessment and control. In: Cincinnati, OH: American Conference of Governmental Industrial Hygienists 1999.
- 159. Kowalski W, Bahnfleth WP and Whittam T. Filtration of airborne microorganisms: modeling and prediction. ASHRAE TRANS 1999; 105: 4-17.
Cited by
Items 101–106 of 106
Lima, F. D. A., Machado, R. G., Teodoro, K. B. R., Pereira, T. S., Chagas, P. A. M., Mercante, L. A., & Correa, D. S. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c02110
Tailoring Aliphatic–Aromatic PBAT Copolyesters for Melt‐Blown Biodegradable Nonwovens
He, J., Zhang, Z., Yu, S., Zhu, L., Xiang, H., & Zhu, M. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70874
Production and Characterization of Poly Lactic Acid (Pla) Meltblown Nonwovens For Air Filtration
Ertoğrul, E., & Kaya, D. D. (2026) · TEKSTİL VE KONFEKSİYON · doi:10.32710/tekstilvekonfeksiyon.1680999
Meira, M. M. C., da Silva, A. A., Lima, B. A., Aguiar, M. L., Cristale, J., Martinez, D. S. T., Lorevice, M. V., & Pozza, S. A. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70962
Assessment of Meltblown High-Temperature Polymers for Fluorine-Free Low-Grammage Nonwoven Structures
Höhnemann, T., Ringger, S., Vocht, M. P., & Azimian, M. (2026) · Polymers · doi:10.3390/polym18212684
A study on methods for estimating the mask size required to minimize peripheral leakage
Morishima, M., Higashi, H., Uchida, H., Okuno, S., & Seto, T. (2026) · Textile Research Journal · doi:10.1177/00405175261501799
Metadata
- Authors
- Kara, Y., & Molnár, K.
- Affiliations
- Budapest University of Technology and Economics (HU)
- Corresponding author
- Molnár, Kolos
- Venue
- Journal of Industrial Textiles
- Publisher
- SAGE Publications
- Published
- 2021-05-26
- Volume
- 51
- Issue
- 1_suppl
- Pages
- 137S-180S
- ISSN
- 0093-4658 (ISSN-L)
- 1528-0837
- 1530-8057
- OpenAlex
- W3167984341
- Cited by
- 97
- References
- 152
- Citations by year
- 2026: 19 · 2025: 20 · 2024: 24 · 2023: 19 · 2022: 13 · 2021: 2
- FWCI
- 4.26
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Industrial Textiles (publishedVersion)
- Repository of the Academy's Library (Library of the Hungarian Academy of Sciences) (acceptedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry for Innovation and Technology (ÚNKP-20-5 New National Excellence Program)
- Budapest University of Technology and Economics (TKP2020, Institutional Excellence Program)
- National Research Development and Innovation Office (BME IE-NAT TKP2020)
- Hungarian Academy of Sciences (János Bolyai Research Scholarship)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- melt blowing, nonwoven fabrics, filtration efficiency, protective masks, pore size, porosity, fiber diameter, fiber packing density, air permeability, pressure drop, particle trapping, COVID-19 masks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.