The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
The Effect of Flow Rate on Morphology and Deposition Area of Electrospun Nylon 6 Nanofiber
Open accessAbstract
Electrospinning is a process that produces continuous polymer fibers with diameters of a nanometric scale. Nylon 6 in formic acid was electrospun to obtain the nanofibers. Fibers with different diameters were obtained using flow rates of 0.1, 0.5, 1 and 1.5 mL/hr, 20 wt% solution concentration, with an applied voltage of 20 kV and 15 cm spinning distance. Flow rate influenced the fiber diameter distribution, droplet size and its initiating shape at the capillary tip, the trajectory of the jet, maintenance of Taylor cone, areal density and nanofiber morphology. The morphology of the electrospun nanofibers was analyzed by using the scanning electron microscope (SEM). The effect of flow rate on the deposition area was also investigated for better control of the process. It was observed that a stabilized Taylor cone, small average droplet size, narrowest fiber diameter distribution, more stability in the originating jet, and uniform morphology of nanofiber is obtained at a flow rate of 0.5 mL/hr.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
An Introduction to Electrospinning and Nanofibers
Ramakrishna, S., Fujihara, K., Teo, W.-E., Lim, T.-C., & Ma, Z. (2005) · WORLD SCIENTIFIC eBooks · doi:10.1142/5894 · Cited by 2,049
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
Micro- and Nanostructured Surface Morphology on Electrospun Polymer Fibers
Megelski, S., Stephens, J. S., Chase, D. B., & Rabolt, J. F. (2002) · Macromolecules · doi:10.1021/ma020444a · Cited by 1,323
Nanostructured Fibers via Electrospinning
Bognitzki, M., Czado, W., Frese, T., Schaper, A., Hellwig, M., Steinhart, M., Greiner, A., & Wendorff, J. H. (2001) · Advanced Materials · doi:10.1002/1521-4095(200101)13:1<70::aid-adma70>3.0.co;2-h · Cited by 1,236
Electrospinning of polyurethane fibers
Demir, M. M., Yilgor, I., Yilgor, E., & Erman, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00136-2 · Cited by 1,099
Surface-functionalized electrospun nanofibers for tissue engineering and drug delivery
Yoo, H. S., Kim, T. G., & Park, T. G. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.007 · Cited by 1,095
Experimental investigation of the governing parameters in the electrospinning of polymer solutions
Theron, S. A., Zussman, E., & Yarin, A. L. (2004) · Polymer · doi:10.1016/j.polymer.2004.01.024 · Cited by 1,021
Cited by
Haider, A., Haider, S., & Kang, I.-K. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.11.015 · Cited by 1,861
Electrospinning: Processes, Structures, and Materials
Ahmadi Bonakdar, M., & Rodrigue, D. (2024) · Macromol · doi:10.3390/macromol4010004 · Cited by 380
Biomedical Applications of Electrospun Nanofibers: Drug and Nanoparticle Delivery
Bhattarai, R. S., Bachu, R. D., Boddu, S. H. S., & Bhaduri, S. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics11010005 · Cited by 322
Abdulhussain, R., Adebisi, A., Conway, B. R., & Asare-Addo, K. (2023) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2023.105156 · Cited by 289
Vijayavenkataraman, S., Thaharah, S., Zhang, S., Lu, W. F., & Fuh, J. Y. H. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.044 · Cited by 108
Metadata
- Authors
- Zargham, S., Bazgir, S., Tavakoli, A., Rashidi, A. S., & Damerchely, R.
- Venue
- Journal of Engineered Fibers and Fabrics
- Publisher
- SAGE Publications
- Published
- 2012-12
- Volume
- 7
- Issue
- 4
- ISSN
- 1558-9250 (ISSN-L)
- OpenAlex
- W2184251691
- Cited by
- 282
- References
- 23
- FWCI
- 1.32
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Effect of Flow Rate on Morphology and Deposition Area of Electrospun Nylon 6 Nanofiber. https://app.cochat.ai/papers/10.1177/155892501200700414
- The paper
- Zargham, S., Bazgir, S., Tavakoli, A., Rashidi, A. S., & Damerchely, R. (2012). The Effect of Flow Rate on Morphology and Deposition Area of Electrospun Nylon 6 Nanofiber. Journal of Engineered Fibers and Fabrics. https://doi.org/10.1177/155892501200700414
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.