The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Scandium in aluminium alloys
Abstract
A considerable part of the available literature on scandium in aluminium alloys is reviewed. Experimental data and assessments of the binary Al–Sc phase diagram, a wide range of ternary Al–Sc–X phase diagrams and a few higher order phase diagrams are accounted for, with emphasis on the aluminium rich part of the diagrams. The phase which is in equilibrium with Al, Al3Sc, can form by several different mechanisms, all of which are described. The precipitation kinetics of Al3Sc in binary Al–Sc alloys are discussed, and an overview of the reported influences of ternary alloying elements on the precipitation of Al3Sc is given. The Al3Sc phase particles can serve as a grain refiner in the Al melt, a dispersoid for controlling the grain structure of the alloy and a strengthening precipitate. Several examples of these three effects are mentioned, both in binary Al–Sc alloys, and in more complex alloys. The reported effects of Sc on the precipitation behaviour in Al–Cu, Al–Mg–Si, Al–Zn–Mg and Al–Li alloys are also revised. A brief account of the effects of Sc additions on the corrosion behaviour of Al and Al-alloys is given. Finally, some views on the current and future use of Sc-containing Al alloys are given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Baker, H. H., Wheaton, N. D., Mills, K. C., & assistance, D. S. P. P. (1992) · ASM International eBooks · Cited by 2,790
Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys
Seidman, D. N., Marquis, E. A., & Dunand, D. C. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00201-x · Cited by 936
The crystal structure of the β″ phase in Al–Mg–Si alloys
Andersen, S. J., Zandbergen, H. W., Jansen, J., TrÆholt, C., Tundal, U., & Reiso, O. (1998) · Acta Materialia · doi:10.1016/s1359-6454(97)00493-x · Cited by 774
Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys
Marquis, E. A., & Seidman, D. N. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00116-1 · Cited by 638
Measurements of Equilibrium Vacancy Concentrations in Aluminum
Simmons, R. O., & Balluffi, R. W. (1960) · Physical Review · doi:10.1103/physrev.117.52 · Cited by 559
Forbord, B., Lefebvre, W., Danoix, F., Hallem, H., & Marthinsen, K. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.03.033 · Cited by 245
Production of ultra-fine grain microstructures in Al–Mg alloys by coventional rolling
Gholinia, A., Humphreys, F. J., & Prangnell, P. B. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00253-7 · Cited by 227
Influence of pressing temperature on microstructural development in equal-channel angular pressing
Yamashita, A., Yamaguchi, D., Horita, Z., & Langdon, T. G. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)00836-4 · Cited by 226
Advanced Aluminum Alloys Containing Scandium: Structure and Properties
Toropova, L. S., Eskin, D. G., Kharakterova, M. L., & Dobatkina, T. V. (1998) · Cited by 184
Cited by
Criteria for developing castable, creep-resistant aluminum-based alloys – A review
Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2022) · International Journal of Materials Research · doi:10.1515/ijmr-2006-0042 · Cited by 812
Binnemans, K., Jones, P. T., Blanpain, B., Van Gerven, T., & Pontikes, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.089 · Cited by 625
Thermal Stability of Aluminum Alloys
Czerwinski, F. (2020) · Materials · doi:10.3390/ma13153441 · Cited by 291
Metadata
- Authors
- Røyset, J., & Ryum, N.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2005-02
- Volume
- 50
- Issue
- 1
- Pages
- 19-44
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W2040392900
- Cited by
- 923
- References
- 16
- FWCI
- 43.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Scandium in aluminium alloys. https://app.cochat.ai/papers/10.1179/174328005x14311
- The paper
- Røyset, J., & Ryum, N. (2005). Scandium in aluminium alloys. International Materials Reviews. https://doi.org/10.1179/174328005x14311
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.