TaO x -based resistive switching memories: prospective and challenges
Open accessThe DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Resistive switching memories (RRAMs) are attractive for replacement of conventional flash in the future. Although different switching materials have been reported; however, low-current operated devices (<100 μA) are necessary for productive RRAM applications. Therefore, TaO x is one of the prospective switching materials because of two stable phases of TaO 2 and Ta 2 O 5, which can also control the stable low- and high-resistance states. Long program/erase endurance and data retention at high temperature under low-current operation are also reported in published literature. So far, bilayered TaO x with inert electrodes (Pt and/or Ir) or single layer TaO x with semi-reactive electrodes (W and Ti/W or Ta/Pt) is proposed for real RRAM applications. It is found that the memory characteristics at current compliance (CC) of 80 μA is acceptable for real application; however, data are becoming worst at CC of 10 μA. Therefore, it is very challenging to reduce the operation current (few microampere) of the RRAM devices. This study investigates the switching mode, mechanism, and performance of low-current operated TaO x -based devices as compared to other RRAM devices. This topical review will not only help for application of TaO x -based nanoscale RRAM devices but also encourage researcher to overcome the challenges in the future production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080 · cited 12×
“These devices usually need a forming step in order to switch between LRS and HRS reversibly [17,21].”
BackgroundInfluentialNanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885 · cited 3×
“Resistance switching effect was first reported by Hickmott in 1962 [32] and had subsequently been observed by many researchers over the years [9-36].”
BackgroundMemristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987 · cited 1×
“Among other various metal oxides such as NiOx [74-76], TiOx [77-81], HfOx [29,38,82-86], Cu2O [87], SrTiO3 [43,88], ZrO2 [89-92], WOx [28,30,93], AlOx [94-97], ZnOx [39,98-101], SiOx [102,103], GdOx [104,105], Pr0.”
BackgroundLee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228
Introduction to the High Temperature Oxidation of Metals
Birks, N., Meier, G. H., & Pettit, F. S. (2006) · doi:10.1017/cbo9781139163903 · Cited by 2,189
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Observation of conducting filament growth in nanoscale resistive memories
Yang, Y., Gao, P., Gaba, S., Chang, T., Pan, X., & Lu, W. (2012) · Nature Communications · doi:10.1038/ncomms1737 · Cited by 1,208 · cited 1×
“Studies involving highresolution transmission electron microscopy showed the conducting filaments in different systems [24,44-48]; however, the switching mechanism is still clearly not understood.”
BackgroundSub-nanosecond switching of a tantalum oxide memristor
Torrezan, A. C., Strachan, J. P., Medeiros-Ribeiro, G., & Williams, R. S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/48/485203 · Cited by 701 · cited 5×
“These devices usually need a forming step in order to switch between LRS and HRS reversibly [17,21].”
BackgroundInfluential
Cited by
Zahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
Sun, X., & Yu, S. (2019) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2019.2933148 · Cited by 170
“The conductance can either drift toward its (a) maximum, (b) minimum, or (c) intermediate conductance states, which have all been reported in the retention measurement of binary eNVMs [32], [33].”
BackgroundChakraborty, I., Ali, M., Ankit, A., Jain, S., Roy, S., Sridharan, S., Agrawal, A., Raghunathan, A., & Roy, K. (2020) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3003007 · Cited by 140
“There could be different conductance drifting modes, where the conductance of the device can move toward a maximum, minimum, and intermediate states [121], [122].”
Background
Metadata
- Authors
- Prakash, A., Jana, D., & Maikap, S.
- Venue
- Nanoscale Research Letters
- Published
- 2013-10-09
- Volume
- 8
- Issue
- 1
- Pages
- 418-418
- ISSN
- 1556-276X (ISSN-L)
- OpenAlex
- W2141166488
- Cited by
- 223
- References
- 12
- FWCI
- 11.58
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: TaO x -based resistive switching memories: prospective and challenges. https://app.cochat.ai/papers/10.1186/1556-276x-8-418
- The paper
- Prakash, A., Jana, D., & Maikap, S. (2013). TaO x -based resistive switching memories: prospective and challenges. Nanoscale Research Letters. https://doi.org/10.1186/1556-276x-8-418
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.