The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Effect of surface roughness of biomaterials on Staphylococcus epidermidis adhesion
Open accessAbstract
BACKGROUND: Implant-related infections are caused by adhesion of bacteria to the surface of biomaterials. In this in vitro research, we evaluated the ability of Staphylococcus epidermidis (ATCC35984) to adhere to the surface of solid biomaterials at different levels of roughness below 30 nm Ra and investigated the minimum level of roughness required to promote bacterial adhesion on five kinds of biomaterials: oxidized zirconium-niobium alloy (Oxinium), cobalt-chromium-molybdenum alloy (Co-Cr-Mo), titanium alloy (Ti-6Al-4 V), commercially pure titanium (Cp-Ti) and stainless steel (SUS316L), samples of which were categorized into a fine group and a coarse group according to surface roughness. The test specimens were physically analyzed and the viable bacterial density of the adhered bacteria was quantitatively determined (n = 20). RESULTS: The amount of bacteria that adhered to the biomaterials in the coarse group was higher than those in the fine group. Oxinium, Ti-6Al-4 V and SUS316L in particular demonstrated statistically significant differences between the two groups (P < 0.05). Of the materials, the Co-Cr-Mo specimens exhibited significantly lower amounts of adhered bacteria than the Ti-6Al-4 V, Cp-Ti and SUS316L specimens in the fine group. Similarly, the Co-Cr-Mo specimens in the coarse group exhibited significantly lower values than the other four materials. CONCLUSIONS: These results suggest that minimum level of roughness affecting initial bacterial adherence activity differs according to the type of biomaterial used, and that even a surface roughness of below 30 nm Ra in Oxinium, Ti-6Al-4 V and SUS316L can promote bacterial adhesion. Relative hydrophobic Co-Cr-Mo surfaces were less susceptible to bacterial adherence.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Antibiotic resistance of bacteria in biofilms
Stewart, P. S., & William Costerton, J. (2001) · The Lancet · doi:10.1016/s0140-6736(01)05321-1 · Cited by 4,585
Guideline for Prevention of Surgical Site Infection, 1999
Mangram, A. J., Horan, T. C., Pearson, M. L., Silver, L. C., & Jarvis, W. R. (1999) · American Journal of Infection Control · doi:10.1016/s0196-6553(99)70088-x · Cited by 2,881
Mangram, A. J., Horan, T. C., Pearson, M. L., Silver, L. C., & Jarvis, W. R. (1999) · PubMed · Cited by 2,783
Bollenl, C. M. L., Lambrechts, P., & Quirynen, M. (1997) · Dental Materials · doi:10.1016/s0109-5641(97)80038-3 · Cited by 1,911 · cited 2×
“2 μm (200 nm) [32,33].”
The Epidemiology of Revision Total Hip Arthroplasty in the United States
Bozic, K. J., Kurtz, S. M., Lau, E., Ong, K., Vail, T. P., & Berry, D. J. (2009) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/jbjs.h.00155 · Cited by 1,662
Effect of material characteristics and/or surface topography on biofilm development
Teughels, W., Van Assche, N., Sliepen, I., & Quirynen, M. (2006) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2006.01353.x · Cited by 1,358
The Epidemiology of Revision Total Hip Arthroplasty in the United States
Bozic, K. J., Kurtz, S. M., Lau, E., Ong, K., Vail, T. P., & Berry, D. J. (2009) · The Journal of Arthroplasty · doi:10.1016/j.arth.2008.11.033 · Cited by 1,275
The Epidemiology of Revision Total Knee Arthroplasty in the United States
Bozic, K. J., Kurtz, S. M., Lau, E., Ong, K., Chiu, V., Vail, T. P., Rubash, H. E., & Berry, D. J. (2010) · Clinical Orthopaedics & Related Research · doi:10.1007/s11999-009-0945-0 · Cited by 1,245
Laboratory of Biomechanics and Biomedical Engineering, D. O. M. E., Katsikogianni, M., & Missirlis, Y. (2004) · European Cells and Materials · doi:10.22203/ecm.v008a05 · Cited by 1,178
Götz, F. (2002) · Molecular Microbiology · doi:10.1046/j.1365-2958.2002.02827.x · Cited by 1,178
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Quirynen, M., & Bollen, C. M. L. (1995) · Journal of Clinical Periodontology · doi:10.1111/j.1600-051x.1995.tb01765.x · Cited by 1,037
Infection after Total Hip Arthroplasty. A Study of the Treatment of One Hundred and Six Infections*
TSUKAYAMA, D. T., ESTRADA, R., & GUSTILO, R. B. (1996) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199604000-00005 · Cited by 957
Molecular basis of intercellular adhesion in the biofilm‐forming Staphylococcus epidermidis
Heilmann, C., Schweitzer, O., Gerke, C., Vanittanakom, N., Mack, D., & Götz, F. (1996) · Molecular Microbiology · doi:10.1111/j.1365-2958.1996.tb02548.x · Cited by 922
Bacterial adhesion: From mechanism to control
Hori, K., & Matsumoto, S. (2010) · Biochemical Engineering Journal · doi:10.1016/j.bej.2009.11.014 · Cited by 799
Spangehl, M. J., Masri, B. A., OʼConnell, J. X., & Duncan, C. P. (1999) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-199905000-00008 · Cited by 761
Bacterial Adhesion on Commercially Pure Titanium and Zirconium Oxide Disks: An In Vivo Human Study
Scarano, A., Piattelli, M., Caputi, S., Favero, G. A., & Piattelli, A. (2004) · Journal of Periodontology · doi:10.1902/jop.2004.75.2.292 · Cited by 622
O'Gara, J. P. (2007) · FEMS Microbiology Letters · doi:10.1111/j.1574-6968.2007.00688.x · Cited by 621
PHILLIPS, C. B., BARRETT, J. A., LOSINA, E., MAHOMED, N. N., LINGARD, E. A., GUADAGNOLI, E., BARON, J. A., HARRIS, W. H., POSS, R., & KATZ, J. N. (2003) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200301000-00004 · Cited by 500
Bacterial resistance to antibiotics: The role of biofilms
Hoyle, B. D., & Costerton, J. W. (1991) · Progress in Drug Research / Fortschritte der Arzneimittelforschung / Progrès des recherches pharmaceutiques · doi:10.1007/978-3-0348-7139-6_2 · Cited by 449
Quirynen, M., Van Der Mei, H. C., Bollen, C. M. L., Schotte, A., Marechal, M., Doornbusch, G. I., Naert, I., Busscher, H. J., & Van Steenberghe, D. (1993) · Journal of Dental Research · doi:10.1177/00220345930720090801 · Cited by 431
Infection after total hip arthroplasty: THE AVON EXPERIENCE
Blom, A. W., Taylor, A. H., Pattison, G., Whitehouse, S., & Bannister, G. C. (2003) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.85b7.14095 · Cited by 426
Management of Infection Associated with Prosthetic Joints
Zimmerli, W., & Ochsner, P. E. (2003) · Infection · doi:10.1007/s15010-002-3079-9 · Cited by 372
Biofilm on dental implants: a review of the literature
Subramani, K., Jung, R. E., Molenberg, A., & Hämmerle, C. H. F. (2009) · PubMed · doi:10.5167/uzh-26110 · Cited by 367
Microbial interactions in Staphylococcus epidermidis biofilms
Mack, D., Davies, A. P., Harris, L. G., Rohde, H., Horstkotte, M. A., & Knobloch, J. K. ‐. (2006) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-006-0745-2 · Cited by 188
The influence of substratum topography on bacterial adhesion to polymethyl methacrylate
TAYLOR, R. L., VERRAN, J., LEES, G. C., & WARD, A. J. P. (1998) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008874326324 · Cited by 180
Physico-Chemical Interactions in Initial Microbial Adhesion and Relevance for Biofilm Formation
Busscher, H. J., & Van Der Mei, H. C. (1997) · Advances in Dental Research · doi:10.1177/08959374970110011301 · Cited by 177
Percival, S. L., Hill, K. E., Malic, S., Thomas, D. W., & Williams, D. W. (2011) · Wound Repair and Regeneration · doi:10.1111/j.1524-475x.2010.00651.x · Cited by 173
Fluckiger, U., Ulrich, M., Steinhuber, A., Döring, G., Mack, D., Landmann, R., Goerke, C., & Wolz, C. (2005) · Infection and Immunity · doi:10.1128/iai.73.3.1811-1819.2005 · Cited by 171
Wymenga, A. B., van Horn, J. R., Theeuwes, A., Tmuytjens, H. L., & Slooff, T. J. J. H. (1992) · Acta Orthopaedica Scandinavica · doi:10.1080/17453679209169732 · Cited by 169
Staphylococcus aureus bacteremia in patients with prosthetic devices: Costs and outcomes
Chu, V. H., Crosslin, D. R., Friedman, J. Y., Reed, S. D., Cabell, C. H., Griffiths, R. I., Masselink, L. E., Kaye, K. S., Corey, G. R., Reller, L. B., et al. (2005) · The American Journal of Medicine · doi:10.1016/j.amjmed.2005.06.011 · Cited by 160
Biofilm formation and composition on different implant materials in vivo
Al‐Ahmad, A., Wiedmann‐Al‐Ahmad, M., Faust, J., Bächle, M., Follo, M., Wolkewitz, M., Hannig, C., Hellwig, E., Carvalho, C., & Kohal, R. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31688 · Cited by 155
Effect of Superhydrophobic Surface of Titanium onStaphylococcus aureusAdhesion
Tang, P., Zhang, W., Wang, Y., Zhang, B., Wang, H., Lin, C., & Zhang, L. (2011) · Journal of Nanomaterials · doi:10.1155/2011/178921 · Cited by 142
Tegoulia, V. A., & Cooper, S. L. (2002) · Colloids and Surfaces B Biointerfaces · doi:10.1016/s0927-7765(01)00240-5 · Cited by 121
Boks, N. P., Busscher, H. J., van der Mei, H. C., & Norde, W. (2008) · Langmuir · doi:10.1021/la801824c · Cited by 114
Surface modification of PVC endotracheal tubes by oxygen glow discharge to reduce bacterial adhesion
Balazs, D. J., Triandafillu, K., Chevolot, Y., Aronsson, B. ‐., Harms, H., Descouts, P., & Mathieu, H. J. (2003) · Surface and Interface Analysis · doi:10.1002/sia.1533 · Cited by 113
Adhesion of Candida albicans and Candida dubliniensis to acrylic and hydroxyapatite
Henriques, M., Azeredo, J., & Oliveira, R. (2004) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2003.10.012 · Cited by 88
Gottenbos, B., van der Mei, H. C., Busscher, H. J., Grijpma, D. W., & Feijén, J. (1999) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008989416939 · Cited by 82
Initial bacterial adhesion on resin, titanium and zirconia in vitro
Lee, B., Jung, G., Kim, D., & Han, J. (2011) · The Journal of Advanced Prosthodontics · doi:10.4047/jap.2011.3.2.81 · Cited by 73
Adherence of Staphylococcus epidermidis to Biomaterials Is Augmented by PIA
Olson, M. S., Garvin, K. L., Fey, P. D., & Rupp, M. E. (2006) · Clinical Orthopaedics and Related Research · doi:10.1097/01.blo.0000229320.45416.0c · Cited by 66
Adhesion of periodontal bacteria to titanium, and titanium alloy powders
Steinberg, D., Sela, M., Klinger, A., et al. (1998) · Clinical Oral Implants Research · doi:10.1034/j.1600-0501.1998.090201.x · Cited by 51
Cited by
Zheng, S., Bawazir, M., Dhall, A., Kim, H.-E., He, L., Heo, J., & Hwang, G. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.643722 · Cited by 872
Staphylococcus aureus and Staphylococcus epidermidis infections on implants
Oliveira, W. F., Silva, P. M. S., Silva, R. C. S., Silva, G. M. M., Machado, G., Coelho, L. C. B. B., & Correia, M. T. S. (2018) · Journal of Hospital Infection · doi:10.1016/j.jhin.2017.11.008 · Cited by 394
Bacterial anti-adhesion surface design: Surface patterning, roughness and wettability: A review
Yang, K., Shi, J., Wang, L., Chen, Y., Liang, C., Yang, L., & Wang, L.-N. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.05.028 · Cited by 330
Metadata
- Authors
- Yoda, I., Koseki, H., Tomita, M., Shida, T., Horiuchi, H., Sakoda, H., & Osaki, M.
- Venue
- BMC Microbiology
- Published
- 2014-09-02
- Volume
- 14
- Issue
- 1
- Pages
- 234-234
- ISSN
- 1471-2180 (ISSN-L)
- OpenAlex
- W2171895664
- Cited by
- 262
- References
- 41
- FWCI
- 10.45
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.