The DOI matches its Crossref record.
4. Near‐Source Ground Motion and its Effects on Flexible Buildings
Abstract
Occurrence of large earthquakes close to cities in California is inevitable. The resulting ground shaking will subject buildings in the near‐source region to large, rapid displacement pulses which are not represented in design codes. The simulated M w 7.0 earthquake on a blind‐thrust fault used in this study produces peak ground displacement and velocity of 200 cm and 180 cm/sec, respectively. Over an area of several hundred square kilometers in the near‐source region, flexible frame and base‐isolated buildings would experience severe nonlinear behavior including the possibility of collapse at some locations. The susceptibility of welded connections to fracture significantly increases the collapse potential of steel‐frame buildings under strong ground motions of the type resulting from the M w 7.0 simulation. Because collapse of a building depends on many factors which are poorly understood, the results presented here regarding collapse should be interpreted carefully.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Mathematical Representation of Near-Fault Ground Motions
Mavroeidis, G. P. (2003) · Bulletin of the Seismological Society of America · doi:10.1785/0120020100 · Cited by 1,002
Characterization of forward-directivity ground motions in the near-fault region
Bray, J. D., & Rodriguez-Marek, A. (2004) · Soil Dynamics and Earthquake Engineering · doi:10.1016/j.soildyn.2004.05.001 · Cited by 805
Effects of Fling Step and Forward Directivity on Seismic Response of Buildings
Kalkan, E., & Kunnath, S. K. (2006) · Earthquake Spectra · doi:10.1193/1.2192560 · Cited by 626
Base isolation for near‐fault motions
Jangid, R. S., & Kelly, J. M. (2001) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.31 · Cited by 471
An Efficient Algorithm to Identify Strong-Velocity Pulses in Multicomponent Ground Motions
Shahi, S. K., & Baker, J. W. (2014) · Bulletin of the Seismological Society of America · doi:10.1785/0120130191 · Cited by 448
The role of damping in seismic isolation
Kelly, J. M. (1999) · Earthquake Engineering & Structural Dynamics · doi:10.1002/(sici)1096-9845(199901)28:1<3::aid-eqe801>3.0.co;2-d · Cited by 446
“Smart” Base Isolation Systems
Ramallo, J. C., Johnson, E. A., & Spencer, B. F. (2002) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(2002)128:10(1088 · Cited by 376
Chopra, A. K., & Chintanapakdee, C. (2001) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.92 · Cited by 373
Microscopic and macroscopic physics of earthquakes
Kanamori, H., & Heaton, T. H. (2000) · Geophysical Monograph Series · doi:10.1029/gm120p0147 · Cited by 296
Self-citationEffect of viscous, viscoplastic and friction damping on the response of seismic isolated structures
Makris, N., & Chang, S.-P. (2000) · Earthquake Engineering & Structural Dynamics · doi:10.1002/(sici)1096-9845(200001)29:1<85::aid-eqe902>3.0.co;2-n · Cited by 294
Wavelet PSO-Based LQR Algorithm for Optimal Structural Control Using Active Tuned Mass Dampers
Amini, F., Hazaveh, N. K., & Rad, A. A. (2013) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12017 · Cited by 137
Active Tendon Control of Torsionally Irregular Structures under Near-Fault Ground Motion Excitation
Nigdeli, S. M., & Boduroğlu, M. H. (2013) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12046 · Cited by 77
LQR control with frequency‐dependent scheduled gain for a semi‐active floor isolation system
Shi, Y., Becker, T. C., Furukawa, S., Sato, E., & Nakashima, M. (2014) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2352 · Cited by 30
Quaranta, G., Mollaioli, F., & Monti, G. (2016) · Earthquakes and Structures · doi:10.12989/eas.2016.10.1.239 · Cited by 26
Metadata
- Authors
- Hall, J. F., Heaton, T. H., Halling, M. W., & Wald, D. J.
- Venue
- Earthquake Spectra
- Publisher
- Wiley
- Published
- 1995-11
- Volume
- 11
- Issue
- 4
- Pages
- 569-605
- ISSN
- 1944-8201 (ISSN-L)
- 8755-2930
- OpenAlex
- W2109709205
- Cited by
- 768
- References
- 0
- FWCI
- 33.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.