CoChat

The Rheological Properties of Elastohydrodynamic Lubricants

Evans, C R, Johnson, K L · 1986 · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science

The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.

Abstract

The methods of measuring the rheological properties of EHD lubricants are reviewed, but for pressures in excess of 1.0 GPa there is currently no simple alternative to the disc machine. A technique has been developed which enables disc machine traction tests to be carried out at constant mean film temperature. Isothermal tests provide further evidence for the existence of a limiting shear stress τ c at which the fluid shears in the manner of a plastic solid. At stresses below this limit the experimental data are found to be in very good accord with the non-linear Maxwell rheological model based on the Eyring theory of fluid flow proposed by Johnson and Tevaarwerk and by Hirst and Moore. The model incorporates three fluid properties: shear modulus G, viscosity τ and Eyring stress τ 0 . Disc machine measurements of τ, τ 0 and the limiting shear stress τ c for three fluids—a mineral oil HVI 650, a synthetic polyphenyl ether 5P4E and a traction fluid Santotrac 50—are presented for a range of pressures (0.6–2.5 GPa) and temperatures (40–120°C).

Overview

Integrity signals

Registry

Crossref · 10.1243/pime_proc_1986_200_134_02

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 9

  1. Johnson K. L., Cameron R. Shear behaviour of EHD oil films at high rolling contact pressures. Proc. Instn Mech. Engrs, Part 1, 1967, 182, 307–319.
  2. Lanov J. L., Peterkin M. E. Traction and film temperature as related to the glass transition and freezing. Trans. ASLE, 1977, 21, 250–256.
  3. Dowson D., Higginson G. R. Elastohydrodynamic lubrication, 2nd edition, 1977 (Pergamon Press, Oxford).
  4. Evans C. R., Johnson K. L. Regimes of traction in elastohydrodynamic lubrication. Proc. Instn Mech. Engrs, Part C, 1986, 200(C5), this issue.
  5. Johnson K. L., Nayak L., Moore A. J. Determination of elastic modulus from disc machine tests. Proceedings of 5th Leeds-Lyon Symposium on Tribology, Leeds, 1978, p. 204 (Mechanical Engineering Publications, London).
  6. Conry T. F., Johnson K. L., Owen S. Viscosity in the thermal region of EHD traction. Proceedings of 6th Leeds–Lyon Symposium on Tribology, Lyon, 1979, (Mechanical Engineering Publications, London).
  7. Hutton J. F., Phillips M. C., Ellis J., Powell G., Wyn-Jones E. Viscoelastic studies of lubricants and other liquids in shear and bulk deformation. Proceedings of 5th Leeds–Lyon Symposium on Tribology, Leeds, 1978, p. 173 (Mechanical Engineering Publications, London).
  8. Hutton J. F. Re-assessment of rheological properties of LVI 260 oil measured in a disc machine. Trans. ASME, J. Tribology, Ser. F, 1984, 106, 537.
  9. Tevaarwerk J. L. Shear of elastohydrodynamic on films. PhD dissertation, University of Cambridge, 1976.

Cited by

See all 295

Metadata

Authors
Evans, C. R., & Johnson, K. L.
Affiliations
University of Cambridge (GB)
Venue
Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science
Published
1986-09
Volume
200
Issue
5
Pages
303-312
ISSN
  • 0263-7154 (ISSN-L)
  • 2058-3397
OpenAlex
W2051777498
Cited by
243
References
24
Citations by year
2026: 2 · 2025: 4 · 2024: 3 · 2023: 5 · 2022: 3 · 2021: 8 · 2020: 7 · 2019: 14 · 2018: 5 · 2017: 8 · 2016: 8 · 2015: 8 · 2014: 6 · 2013: 4 · 2012: 4
FWCI
7.00
Type
journal article
Language
en
Open access
closed
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Locations
Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
  • Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
Keywords
elastohydrodynamic lubrication, lubricant rheology, limiting shear stress, shear modulus, viscosity, mineral oil, traction fluids, high-pressure lubrication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.