CoChat

Regimes of Traction in Elastohydrodynamic Lubrication

Evans, C R, Johnson, K L · 1986 · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science

The DOI matches its Crossref record; 15 of the 16 references it cites were found in a registry or an index, and 1 are not checked yet.

Abstract

The rheological behaviour of the lubricant in an elastohydrodynamic contact depends upon the properties of the fluid and the imposed conditions of load, speed and temperature. For a lubricant of known rheological properties, it is shown how a ‘map’ can be constructed in which different areas of the map correspond to different regimes of behaviour. The coordinates chosen for the map are non-dimensional pressure and a parameter which is closely related to the film thickness. Given the load, speed and temperature, the operating conditions can be located as a point in the map. Maps have been constructed for three fluids: a mineral oil, polyphenyl ether 5P4E and a traction fluid. In general the maps display four regimes: (a) Newtonian, (b) Eyring, (c) viscoelastic and (d) elastic-plastic. Appropriate constitutive equations are proposed for each regime from which the traction forces can be predicted. The maximum traction coefficients calculated in this way are well supported by experiment.

Overview

Integrity signals

Registry

Crossref · 10.1243/pime_proc_1986_200_135_02

Cites

15 of 16 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 2

  1. Frost M. J., Ashby M. F. Deformation—mechanism maps, 1982 (Pergamon Press, Oxford).
  2. 10.1098/rspa.1975.0109 · DOI

Cited by

See all 156

Metadata

Authors
Evans, C. R., & Johnson, K. L.
Affiliations
University of Cambridge (GB)
Venue
Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science
Published
1986-09
Volume
200
Issue
5
Pages
313-324
ISSN
  • 0263-7154 (ISSN-L)
  • 2058-3397
OpenAlex
W2053048400
Cited by
152
References
14
Citations by year
2026: 1 · 2025: 3 · 2023: 5 · 2022: 4 · 2021: 6 · 2020: 6 · 2019: 7 · 2018: 5 · 2017: 7 · 2016: 5 · 2015: 7 · 2014: 8 · 2013: 7 · 2012: 5
FWCI
7.00
Type
journal article
Language
en
Open access
closed
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Locations
Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
  • Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
  • Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
Keywords
elastohydrodynamic lubrication, lubricant rheology, traction coefficient, Eyring model, viscoelastic lubricant, traction fluids, film thickness, constitutive equations, non-Newtonian lubrication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.