Low-loss dielectric mirror with ion-beam-sputtered TiO_2–SiO_2 mixed films
The DOI matches its Crossref record.
Abstract
Ion-beam-sputtered TiO(2)-SiO(2) mixed films with 17% SiO(2) concentration were used as high-refractive-index layers in a multilayered-stack dielectric mirror. Experimental results indicated that total loss of the as-deposited mirror was 34% lower than that of the as-deposited conventional mirrors with pure TiO(2) films used as high-refractive-index layers. In addition, annealing reduced total loss of the mirrors. Although decreasing with an increasing annealing temperature, total loss of the conventional mirrors dramatically increased above ~200 degrees C annealing temperature, owing to increased scattering from an amorphous-to-crystalline phase transition in the TiO(2) films. In addition, total loss of the mirrors with the mixed films continuously decreased with an increasing annealing temperature up to 400 degrees C without the phase transition. Total loss was reduced 88% by means of decreasing absorption in the mixed films. Moreover, the annealed mirror with mixed films was better than both the as-deposited mirror and the conventional mirror with pure films in terms of laser-damage resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 7
- Rempe, 1992, Opt. Lett., 17, 363, 10.1364/OL.17.000363 · DOI · Paper page
- Wei, 1989, Appl. Opt., 28, 2813, 10.1364/AO.28.002813 · DOI
- Bennett, 1989, Appl. Opt., 28, 3303, 10.1364/AO.28.003303 · DOI · Paper page
- Wang, 1998, Opt. Lett., 23, 1417, 10.1364/OL.23.001417 · doi:10.1364/ol.23.001417
- Chao, 1991, Appl. Opt., 30, 3233, 10.1364/AO.30.003233 · doi:10.1364/ao.30.003233
- Chen, 1996, Appl. Opt., 35, 90, 10.1364/AO.35.000090 · doi:10.1364/ao.35.000090
- Chao, 1999, J. Opt. Soc. Am. A, 16, 1477, 10.1364/JOSAA.16.001477 · doi:10.1364/josaa.16.001477
Cited by
Amato, A., Magnozzi, M., Shcheblanov, N., Lemaître, A., Cagnoli, G., Granata, M., Michel, C., Gemme, G., Pinard, L., & Canepa, M. (2023) · ACS Applied Optical Materials · doi:10.1021/acsaom.2c00077 · Cited by 11
Mirror Coating Research and Developments for Current and Future Gravitational-Wave Detectors
Amato, A., Magnozzi, M., & Wöhler, J. (2025) · Advanced Photonics Research · doi:10.1002/adpr.202400117 · Cited by 9
Wu, H.-Y., Chen, H.-W., Huang, S.-R., Hsiao, L.-J., Cheng, C.-L., Yu, G.-Y., Sun, Y.-S., & Hsu, J.-C. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e35507 · Cited by 6
“A dielectric multilayer configuration can be used with combinations of alternating high and low refractive indices to improve the [11,62].”
MethodMetal Oxide Thin Films for Advanced Photonic Applications
Stîngescu, M.-L., Șopronyi, M.-A., Antohe, Ș., & Scărișoreanu, N.-D. (2026) · Crystals · doi:10.3390/cryst16030164 · Cited by 2
Metadata
- Authors
- Chao, S., Wang, W.-H., & Lee, C.-C.
- Venue
- Applied Optics
- Publisher
- Optica Publishing Group
- Published
- 2001-05-01
- Volume
- 40
- Issue
- 13
- Pages
- 2177
- ISSN
- 0003-6935 (ISSN-L)
- 1539-4522
- OpenAlex
- W2078505580
- Cited by
- 74
- References
- 0
- FWCI
- 0.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- doi.org/10.1364/OA_License_v1#VOR (vor)
- opg.optica.org/policies/opg-tdm-policy.json (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low-loss dielectric mirror with ion-beam-sputtered TiO_2–SiO_2 mixed films. https://app.cochat.ai/papers/10.1364/ao.40.002177
- The paper
- Chao, S., Wang, W.-H., & Lee, C.-C. (2001). Low-loss dielectric mirror with ion-beam-sputtered TiO_2–SiO_2 mixed films. Applied Optics. https://doi.org/10.1364/ao.40.002177
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.