CoChat

An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties

Open access

The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.

Abstract

Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1371/journal.pone.0042355

Cites

58 of 58 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Percentage distribution (mean and standard deviation) of live bacteria within the biovolumes of interest (i.e. the volume of biofilm from the base to the 24th µm of a z-stack), and within the biomass at the basal layer of biofilms that were grown on orthodontic acrylic disks prepared from the control (0 wt% QAMS) and the four experimental groups (0.4–6 wt% QAMS) (N = 6). A. Streptococcus mutans biofilms. B. Actinomyces naeslundii biofilms. For each parameter (upper case letters for biovolume and numerals for bottom of biofilm), groups labeled with the same category of descriptors (i.e. upper case letters, lower case letters, numeric) are not statistically significant (P>0.05).
Figure 1 Percentage distribution (mean and standard deviation) of live bacteria within the biovolumes of interest (i.e. the volume of biofilm from the base to the 24th µm of a z-stack), and within the biomass at the basal layer of biofilms that were grown on orthodontic acrylic disks prepared from the control (0 wt% QAMS) and the four experimental groups (0.4–6 wt% QAMS) (N = 6). A. Streptococcus mutans biofilms. B. Actinomyces naeslundii biofilms. For each parameter (upper case letters for biovolume and numerals for bottom of biofilm), groups labeled with the same category of descriptors (i.e. upper case letters, lower case letters, numeric) are not statistically significant (P>0.05).CC BY · PubMed Central
Figure 2 Representative BacLight-stained 48-h S. mutans biofilms grown on the surfaces of orthodontic acrylic resins with different QAMS concentrations. A. 0 wt%. B. 0.4 wt%. C. 2 wt%. D. 4 wt%. E. 6 wt%. Green: live bacteria; Red: dead bacteria. The first column represents merged CLSM images of the biofilms. The second column represents 3-D plots of each biofilm within a biovolume extending from the 1st (basal) to the 13th layer of a Z-stack (i.e. 24 µm thick). The 3rd column represents the percentage distribution of live and dead bacteria within the biomass at each level of the biofilm (Z-step = 2 µm). For C–E, the blue dotted line denotes the levels with 50% dead biomass.
Figure 2 Representative BacLight-stained 48-h S. mutans biofilms grown on the surfaces of orthodontic acrylic resins with different QAMS concentrations. A. 0 wt%. B. 0.4 wt%. C. 2 wt%. D. 4 wt%. E. 6 wt%. Green: live bacteria; Red: dead bacteria. The first column represents merged CLSM images of the biofilms. The second column represents 3-D plots of each biofilm within a biovolume extending from the 1st (basal) to the 13th layer of a Z-stack (i.e. 24 µm thick). The 3rd column represents the percentage distribution of live and dead bacteria within the biomass at each level of the biofilm (Z-step = 2 µm). For C–E, the blue dotted line denotes the levels with 50% dead biomass.CC BY · PubMed Central
Figure 3 Representative BacLight-stained, 48-h A. naeslundii biofilms grown on the surfaces of orthodontic acrylic resins with different QAMS concentrations. A. 0 wt%. B. 0.4 wt%. C. 2 wt%. D. 4 wt%. E. 6 wt%. Green: live bacteria; Red: dead bacteria. Column designations are the same as Figure 2. For the scatter plots in the right column of C–E, the blue dotted line denotes the levels with 50% dead biomass.
Figure 3 Representative BacLight-stained, 48-h A. naeslundii biofilms grown on the surfaces of orthodontic acrylic resins with different QAMS concentrations. A. 0 wt%. B. 0.4 wt%. C. 2 wt%. D. 4 wt%. E. 6 wt%. Green: live bacteria; Red: dead bacteria. Column designations are the same as Figure 2. For the scatter plots in the right column of C–E, the blue dotted line denotes the levels with 50% dead biomass.CC BY · PubMed Central
Figure 4 Representative merged images illustrating the adhesion and growth of C. albicans on orthodontic acrylic surfaces containing A. 0 wt% QAMS (control). B. 0.4 wt% QAMS. C. 2 wt% QAMS. D. 4 wt% QAMS. E. 6 wt% QAMS. F. Two-dimensional analysis of the growth of C. albicans on the surfaces of orthodontic acrylic resins with different QAMS concentrations (N = 6). C. albicans did not form biofilms on acrylic surfaces containing QAMS. Percentage distributions of the fungal biomass with the field of examination are shown as black columns, and the percentage distributions of live fungus within the biomass are depicted as green columns. For each parameter, groups identified with the same category of descriptors (i.e. upper case letters for biomass and lower case letters for live fungi) are not statistically significant (P<0.05). Values represent means and standard deviations.
Figure 4 Representative merged images illustrating the adhesion and growth of C. albicans on orthodontic acrylic surfaces containing A. 0 wt% QAMS (control). B. 0.4 wt% QAMS. C. 2 wt% QAMS. D. 4 wt% QAMS. E. 6 wt% QAMS. F. Two-dimensional analysis of the growth of C. albicans on the surfaces of orthodontic acrylic resins with different QAMS concentrations (N = 6). C. albicans did not form biofilms on acrylic surfaces containing QAMS. Percentage distributions of the fungal biomass with the field of examination are shown as black columns, and the percentage distributions of live fungus within the biomass are depicted as green columns. For each parameter, groups identified with the same category of descriptors (i.e. upper case letters for biomass and lower case letters for live fungi) are not statistically significant (P<0.05). Values represent means and standard deviations.CC BY · PubMed Central
Figure 5 Colorimetric assays for examining the amount of A. Remnant quaternary ammonium charges present on the surface of the acrylic (fluorescein staining) after a 7-day water-aging period, and B. Cumulative amount (in mM) quaternary ammonium moieties present in the leachate after the 7-day water-aging period. Columns indicated by different symbols are significantly different from those without symbols (P<0.05).
Figure 5 Colorimetric assays for examining the amount of A. Remnant quaternary ammonium charges present on the surface of the acrylic (fluorescein staining) after a 7-day water-aging period, and B. Cumulative amount (in mM) quaternary ammonium moieties present in the leachate after the 7-day water-aging period. Columns indicated by different symbols are significantly different from those without symbols (P<0.05).CC BY · PubMed Central
Figure 6 Effects of QAMS concentration on the flexural properties of the orthodontic acrylic resins (N = 10). A. Ultimate flexural strength. B. Flexural modulus. For each parameter, the ISO requirement is included for comparison (dotted line). For the ultimate flexural strength, groups with the same upper case letter designators are not statistically significant (P>0.05). For flexural modulus, groups with the same lower case letter designators are not statistically significant (P>0.05). Values represent means and standard deviations.
Figure 6 Effects of QAMS concentration on the flexural properties of the orthodontic acrylic resins (N = 10). A. Ultimate flexural strength. B. Flexural modulus. For each parameter, the ISO requirement is included for comparison (dotted line). For the ultimate flexural strength, groups with the same upper case letter designators are not statistically significant (P>0.05). For flexural modulus, groups with the same lower case letter designators are not statistically significant (P>0.05). Values represent means and standard deviations.CC BY · PubMed Central
Figure 7 Effects of QAMS concentration on the toughness properties of the orthodontic acrylic resins (N = 10). A. Maximum stress intensity factor (Kmax). B. Work of Fracture (Wf). For each parameter, the ISO requirement is included for comparison (dotted line). Linear regression models provide an excellent fit for the relation between Kmax and QAMS concentration, and the relation between total fracture work and QAMS concentration. For Kmax, groups with the same upper case letter designators are not statistically significant (P>0.05). For total fracture work, groups with the same lower case letter designators are not statistically significant (P>0.05). Values represent means and standard deviations.
Figure 7 Effects of QAMS concentration on the toughness properties of the orthodontic acrylic resins (N = 10). A. Maximum stress intensity factor (Kmax). B. Work of Fracture (Wf). For each parameter, the ISO requirement is included for comparison (dotted line). Linear regression models provide an excellent fit for the relation between Kmax and QAMS concentration, and the relation between total fracture work and QAMS concentration. For Kmax, groups with the same upper case letter designators are not statistically significant (P>0.05). For total fracture work, groups with the same lower case letter designators are not statistically significant (P>0.05). Values represent means and standard deviations.CC BY · PubMed Central
Figure 8 Effects of QAMS concentration on A. Water sorption; B. Water solubility; C. Sorption diffusion coefficients of QAMS-free and QAMS-containing orthodontic acrylic resins (N = 10). Values represent means and standard deviations. ISO requirements for water sorption and water solubility are included for comparison (dotted lines). For each parameter, groups designated with different categories of descriptors (upper case letters for water sorption, lower case letters for water solubility, numerals for diffusion coefficients), are not statistically significant (P>0.05). D. A water sorption isotherm representative of all the five groups.
Figure 8 Effects of QAMS concentration on A. Water sorption; B. Water solubility; C. Sorption diffusion coefficients of QAMS-free and QAMS-containing orthodontic acrylic resins (N = 10). Values represent means and standard deviations. ISO requirements for water sorption and water solubility are included for comparison (dotted lines). For each parameter, groups designated with different categories of descriptors (upper case letters for water sorption, lower case letters for water solubility, numerals for diffusion coefficients), are not statistically significant (P>0.05). D. A water sorption isotherm representative of all the five groups.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 58 references

Cited by

See all 53

Metadata

Authors
Gong, S.-Q., Epasinghe, J., Rueggeberg, F. A., Niu, L.-N., Mettenberg, D., Yiu, C. K. Y., Blizzard, J. D., Wu, C. D., Mao, J., Drisko, C. L., Pashley, D. H., & Tay, F. R.
Affiliations
  • Georgia State University (US)
  • Air Force Medical University (CN)
  • University of Hong Kong (HK)
  • University of Illinois Chicago (US)
  • Tongji Hospital (CN)
Corresponding author
  • Mao, Jing
  • Tay, Franklin R.
Venue
PLoS ONE
Published
2012-08-01
Volume
7
Issue
8
Pages
e42355
ISSN
1932-6203 (ISSN-L)
OpenAlex
W2055733391
Cited by
53
References
57
Citations by year
2026: 2 · 2025: 2 · 2024: 4 · 2023: 2 · 2022: 3 · 2021: 4 · 2020: 6 · 2019: 4 · 2018: 5 · 2017: 3 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 5
FWCI
5.86
Type
journal article
Language
en
Open access
Locations
  • PLoS ONE (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • Figshare (submittedVersion, cc-by)
  • The HKU Scholars Hub (University of Hong Kong) (submittedVersion, cc-by-nc-nd)
Funders
National Institute of Dental and Craniofacial Research (R01DE015306)
Topics
  • Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
  • Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
  • Physical Sciences › Materials Science › Materials Chemistry › Silicone and Siloxane Chemistry
Keywords
organically modified silica, antimicrobial activity, antifungal activity, biofilm inhibition, Streptococcus mutans, Candida albicans, fracture toughness, water wettability, removable orthodontic appliances
MeSH terms
Acrylic Resins, Actinomyces, Anti-Infective Agents, Candida albicans, Orthodontic Appliances, Removable, Resins, Synthetic, Siloxanes, Streptococcus mutans

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties. https://app.cochat.ai/papers/10.1371/journal.pone.0042355
The paper
Gong, S.-Q., Epasinghe, J., Rueggeberg, F. A., Niu, L.-N., Mettenberg, D., Yiu, C. K. Y., Blizzard, J. D., Wu, C. D., Mao, J., Drisko, C. L., Pashley, D. H., & Tay, F. R. (2012). An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties. PLoS ONE. https://doi.org/10.1371/journal.pone.0042355

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.