CoChat

Determining Biophysical Protein Stability in Lysates by a Fast Proteolysis Assay, FASTpp

Open access

The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.

Abstract

The biophysical stability is an important parameter for protein activity both in vivo and in vitro. Here we propose a method to analyse thermal melting of protein domains in lysates: Fast parallel proteolysis (FASTpp). Combining unfolding by a temperature gradient in a thermal cycler with simultaneous proteolytic cleavage of the unfolded state, we probed stability of single domains in lysates. We validated FASTpp on proteins from 10 kDa to 240 kDa and monitored stabilisation and coupled folding and binding upon interaction with small-molecule ligands. Within a total reaction time of approximately 1 min, we probed subtle stability differences of point mutations with high sensitivity and in agreement with data obtained by intrinsic protein fluorescence. We anticipate a wide range of applications of FASTpp in biomedicine and protein engineering as it requires only standard laboratory equipment.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1371/journal.pone.0046147

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 FASTpp combines automated temperature control and quantitatively characterised proteolysis to unveal protein interactions and stability. A, Protein stability can be probed by measuring the thermal unfolding transition in the presence of a protease. The folded state resists protease digestion while the unfolded state is readily digested on the same timescale. The thermal unfolding transition of a protein may be shifted to higher temperatures by addition of a ligand of the folded state. A shift to lower transition temperatures may occur upon destabilisation of the protein by, for instance, cancer mutations. B, Temperatures are controlled automatically using a standard gradient PCR setup. A mastermix of sample and protease is prepared on ice or in a cold room at 4°C and subsequently aliquoted to a PCR strip that is simultaneously heated up during the heating time th to a range of melting temperatures that are kept for a variable melting time tm. Subsequently simultaneous cooling (cooling time, tc ) brings all aliquots back to 4°C and the reaction is quenched by addition of EDTA. C, Scheme of all seven processing steps of the FASTpp assay. The representation of the termocycler indicates the automated steps of the FASTpp protocol, the gel indicates the final analysis by SDS-PAGE (T, temperature; ΔT, change of temperature; x–y°C, melting temperature gradient).
Figure 1 FASTpp combines automated temperature control and quantitatively characterised proteolysis to unveal protein interactions and stability. A, Protein stability can be probed by measuring the thermal unfolding transition in the presence of a protease. The folded state resists protease digestion while the unfolded state is readily digested on the same timescale. The thermal unfolding transition of a protein may be shifted to higher temperatures by addition of a ligand of the folded state. A shift to lower transition temperatures may occur upon destabilisation of the protein by, for instance, cancer mutations. B, Temperatures are controlled automatically using a standard gradient PCR setup. A mastermix of sample and protease is prepared on ice or in a cold room at 4°C and subsequently aliquoted to a PCR strip that is simultaneously heated up during the heating time th to a range of melting temperatures that are kept for a variable melting time tm. Subsequently simultaneous cooling (cooling time, tc ) brings all aliquots back to 4°C and the reaction is quenched by addition of EDTA. C, Scheme of all seven processing steps of the FASTpp assay. The representation of the termocycler indicates the automated steps of the FASTpp protocol, the gel indicates the final analysis by SDS-PAGE (T, temperature; ΔT, change of temperature; x–y°C, melting temperature gradient).CC BY · PubMed Central
Figure 2 Thermolysin is active from 20°C to 80°C. Thermal dependence of intrinsic rates of proteolysis of TL from 20°C to 80°C. After extensive thermal pre-equilibration, we determined kinetic traces of cleavage of an unstructured model substrate of TL, in triplicate for each temperature. The obtained rates were extrapolated based on empirically derived formulas to final concentrations of 0.1 g/L and on top 0.01 g/L of TL [1].
Figure 2 Thermolysin is active from 20°C to 80°C. Thermal dependence of intrinsic rates of proteolysis of TL from 20°C to 80°C. After extensive thermal pre-equilibration, we determined kinetic traces of cleavage of an unstructured model substrate of TL, in triplicate for each temperature. The obtained rates were extrapolated based on empirically derived formulas to final concentrations of 0.1 g/L and on top 0.01 g/L of TL [1].CC BY · PubMed Central
Figure 3 TL preferentially cleaves unfolded protein. A, Thermal TL resistance of apo Cytochrome C (CytC). Only in absence of protease at 4°C, apo CytC was detected on the gel. Upon addition of TL, cleavage already occured on ice and no protease resistant protein was observed after additional incubation at higher temperatures. B, Thermal protease resistance of CytC in presence of the bound heme ligand. A strong band of CytC is visible in absence and presence of TL from temperatures from 4°C to 60°C.
Figure 3 TL preferentially cleaves unfolded protein. A, Thermal TL resistance of apo Cytochrome C (CytC). Only in absence of protease at 4°C, apo CytC was detected on the gel. Upon addition of TL, cleavage already occured on ice and no protease resistant protein was observed after additional incubation at higher temperatures. B, Thermal protease resistance of CytC in presence of the bound heme ligand. A strong band of CytC is visible in absence and presence of TL from temperatures from 4°C to 60°C.CC BY · PubMed Central
Figure 4 FASTpp is robust over 3 orders of magnitude of TL concentration changes. A, Thermal TL resistance of MBP using limiting TL concentration of 0.001 g/L. Over the entire temperature range from 50°C to 70°C, MBP remains intact. B, Thermal protease resistance of MBP using a TL concentration of 0.01 g/L. At this TL concentration, a clear thermal unfolding transition becomes apparent between 50°C and 60°C. Likely due to kinetic competition between irreversible aggregation and proteolytic cleavage of the unfolded state, some MBP is not digested at 69 and 70°C. C, Thermal protease resistance of MBP using limiting TL concentration of 0.1 g/L. A similar unfolding transition of MBP as in B is observed. D, Thermal protease resistance of MBP using limiting TL concentration of 1 g/L. A similar thermal unfolding transition of MBP is observed as in B.
Figure 4 FASTpp is robust over 3 orders of magnitude of TL concentration changes. A, Thermal TL resistance of MBP using limiting TL concentration of 0.001 g/L. Over the entire temperature range from 50°C to 70°C, MBP remains intact. B, Thermal protease resistance of MBP using a TL concentration of 0.01 g/L. At this TL concentration, a clear thermal unfolding transition becomes apparent between 50°C and 60°C. Likely due to kinetic competition between irreversible aggregation and proteolytic cleavage of the unfolded state, some MBP is not digested at 69 and 70°C. C, Thermal protease resistance of MBP using limiting TL concentration of 0.1 g/L. A similar unfolding transition of MBP as in B is observed. D, Thermal protease resistance of MBP using limiting TL concentration of 1 g/L. A similar thermal unfolding transition of MBP is observed as in B.CC BY · PubMed Central
Figure 5 FASTpp can monitor kinetic stability of proteins by change of tm. A, Thermal TL resistance of MBP using 6 s tm. MBP was increasingly cleaved from 40°C to 60°C. B, Thermal TL resistance of MBP using 60 s tm. MBP was increasingly accessible to digestion from 40°C to 53°C. Above 53°C, no MBP was detected. C, Thermal TL resistance of MBP using 600 s tm. MBP was increasingly accessible to digestion from 40°C to 49°C. Above 49°C temperature, no MBP was detected.
Figure 5 FASTpp can monitor kinetic stability of proteins by change of tm. A, Thermal TL resistance of MBP using 6 s tm. MBP was increasingly cleaved from 40°C to 60°C. B, Thermal TL resistance of MBP using 60 s tm. MBP was increasingly accessible to digestion from 40°C to 53°C. Above 53°C, no MBP was detected. C, Thermal TL resistance of MBP using 600 s tm. MBP was increasingly accessible to digestion from 40°C to 49°C. Above 49°C temperature, no MBP was detected.CC BY · PubMed Central
Figure 6 FASTpp can detect ligand effect on purified protein and in complex mixtures. A, FASTpp of purified MBP. Unfolding was observed above 58°C. B, FASTpp of purified MBP plus 5 mM maltose. Unfolding was not observed up to 70°C. C, FASTpp proteolysis of MBP overexpression lysate. Unfolding was observed above 59°C. D, FASTpp of MBP overexpression lysate plus 5 mM maltose. Unfolding was not observed up to 70°C. E, Fluorescence melting curves of MBP. MBP melted in absence of a ligand between 30°C and 40°C. In presence of 5 mM maltose, unfolding was observed between 40°C and 50°C.
Figure 6 FASTpp can detect ligand effect on purified protein and in complex mixtures. A, FASTpp of purified MBP. Unfolding was observed above 58°C. B, FASTpp of purified MBP plus 5 mM maltose. Unfolding was not observed up to 70°C. C, FASTpp proteolysis of MBP overexpression lysate. Unfolding was observed above 59°C. D, FASTpp of MBP overexpression lysate plus 5 mM maltose. Unfolding was not observed up to 70°C. E, Fluorescence melting curves of MBP. MBP melted in absence of a ligand between 30°C and 40°C. In presence of 5 mM maltose, unfolding was observed between 40°C and 50°C.CC BY · PubMed Central
Figure 7 Maltose does not stabilise a control substrate that has no known maltose-binding activity. A, FASTpp of BSA in absence of maltose. BSA was completely digested at temperatures from 62°C to 70°C after a gradual unfolding transition over a range of temperatures from 51 to 59°C. B, FASTpp of BSA in presence of 5 mM maltose. BSA was completely digested at temperatures from 62°C to 70°C after a gradual unfolding transition over a range of temperatures from 51 to 59°C.
Figure 7 Maltose does not stabilise a control substrate that has no known maltose-binding activity. A, FASTpp of BSA in absence of maltose. BSA was completely digested at temperatures from 62°C to 70°C after a gradual unfolding transition over a range of temperatures from 51 to 59°C. B, FASTpp of BSA in presence of 5 mM maltose. BSA was completely digested at temperatures from 62°C to 70°C after a gradual unfolding transition over a range of temperatures from 51 to 59°C.CC BY · PubMed Central
Figure 8 Ligand-dependent stability of a 240 kDa protein can be probed by FASTpp. A, Pyruvat kinase (PK) FASTpp. PK was resistant from 4°C to 58°C. A gradual decrease in the band intensity at higher temperatures indicates unfolding. Over a broad range of even higher temperatures, a small fraction of protease-resistant species persists (that likely represent aggregates formed rapidly upon unfolding). B, FASTpp of PK in presence of 5 mM ATP. PK was resistant against TL digestion from 4°C to 59.6°C. Already at 60.4°C, nearly complete digestion was observed.
Figure 8 Ligand-dependent stability of a 240 kDa protein can be probed by FASTpp. A, Pyruvat kinase (PK) FASTpp. PK was resistant from 4°C to 58°C. A gradual decrease in the band intensity at higher temperatures indicates unfolding. Over a broad range of even higher temperatures, a small fraction of protease-resistant species persists (that likely represent aggregates formed rapidly upon unfolding). B, FASTpp of PK in presence of 5 mM ATP. PK was resistant against TL digestion from 4°C to 59.6°C. Already at 60.4°C, nearly complete digestion was observed.CC BY · PubMed Central
Figure 9 Missense mutation effects on protein stability can be probed by FASTpp. A, Intrinsic fluorescence temperature depence of three Sortase A variants. 3×M is triplemutant, 4×M is tetramutant, 5×M is pentamutant. B, FASTpp of the same three Sortase A variants as in A.
Figure 9 Missense mutation effects on protein stability can be probed by FASTpp. A, Intrinsic fluorescence temperature depence of three Sortase A variants. 3×M is triplemutant, 4×M is tetramutant, 5×M is pentamutant. B, FASTpp of the same three Sortase A variants as in A.CC BY · PubMed Central
Figure 10 FASTpp is suitable for a wide range of substrates. Representative snapshots from crystallographic studies on the used model proteins. BSA is α-helically folded (pdb identifier 1E7I), MBP has some β-sheets (pdb identifier 1JWY, 1ANF), PK contains more β-sheets (pdb identifier 1F3W), Sortase A mostly β-sheets (pdb identifier 1T2O) and folded Cytochrome C in presence of heme contains extended loops (pdb identifier 1AKK) [27], [28], [34], [46]. The PONDR-FIT predictions are shown in black frames in a simplified view with black indicating a score for intrinsic disorder above 0.5 and background color scores from 0 to 0.5.
Figure 10 FASTpp is suitable for a wide range of substrates. Representative snapshots from crystallographic studies on the used model proteins. BSA is α-helically folded (pdb identifier 1E7I), MBP has some β-sheets (pdb identifier 1JWY, 1ANF), PK contains more β-sheets (pdb identifier 1F3W), Sortase A mostly β-sheets (pdb identifier 1T2O) and folded Cytochrome C in presence of heme contains extended loops (pdb identifier 1AKK) [27], [28], [34], [46]. The PONDR-FIT predictions are shown in black frames in a simplified view with black indicating a score for intrinsic disorder above 0.5 and background color scores from 0 to 0.5.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 46 references

Cited by

See all 37

Metadata

Authors
Minde, D. P., Maurice, M. M., & Rüdiger, S. G. D.
Affiliations
  • Utrecht University (NL)
  • University Medical Center Utrecht (NL)
Corresponding author
  • Maurice, Madelon M.
  • Rüdiger, Stefan G. D.
Venue
PLoS ONE
Published
2012-10-03
Volume
7
Issue
10
Pages
e46147
ISSN
1932-6203 (ISSN-L)
OpenAlex
W2040090535
Cited by
37
References
46
Citations by year
2024: 2 · 2023: 2 · 2022: 3 · 2021: 1 · 2020: 2 · 2019: 5 · 2018: 3 · 2017: 7 · 2016: 2 · 2015: 3 · 2014: 3 · 2013: 3
FWCI
1.16
Type
journal article
Language
en
Open access
Locations
  • PLoS ONE (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Figshare (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
  • Apollo (University of Cambridge) (submittedVersion, cc-by)
  • Apollo (cc-by)
  • Figshare (cc-by)
Funders
  • European Commission
  • Ministry of Education, Culture, Sports, Science and Technology
  • Universiteit Utrecht
  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek
  • FP7 Ideas: European Research Council (242958)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein Structure and Dynamics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein purification and stability
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › thermodynamics and calorimetric analyses
Keywords
protein stability, thermal denaturation, protein domains, lysate, point mutations, ligand binding, protein folding, protein engineering
MeSH terms
Bacterial Proteins, Chemistry Techniques, Analytical, Cysteine Endopeptidases, Electrophoresis, Polyacrylamide Gel, Heme, Kinetics, Maltose, Protein Binding, Protein Denaturation, Proteins, Temperature, Thermolysin, Reproducibility of Results, Point Mutation, Protein Structure, Tertiary, Protein Folding, Aminoacyltransferases, Cytochromes c, Protein Stability, Biophysical Phenomena, Maltose-Binding Proteins, Protein Unfolding, Proteolysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Determining Biophysical Protein Stability in Lysates by a Fast Proteolysis Assay, FASTpp. https://app.cochat.ai/papers/10.1371/journal.pone.0046147
The paper
Minde, D. P., Maurice, M. M., & Rüdiger, S. G. D. (2012). Determining Biophysical Protein Stability in Lysates by a Fast Proteolysis Assay, FASTpp. PLoS ONE. https://doi.org/10.1371/journal.pone.0046147

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.