The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice
Open accessAbstract
Tissue engineering plays an important role in the production of skin equivalents for the therapy of chronic and especially burn wounds. Actually, there exists no (cellularized) skin equivalent which might be able to satisfactorily mimic native skin. Here, we utilized a laser-assisted bioprinting (LaBP) technique to create a fully cellularized skin substitute. The unique feature of LaBP is the possibility to position different cell types in an exact three-dimensional (3D) spatial pattern. For the creation of the skin substitutes, we positioned fibroblasts and keratinocytes on top of a stabilizing matrix (Matriderm®). These skin constructs were subsequently tested in vivo, employing the dorsal skin fold chamber in nude mice. The transplants were placed into full-thickness skin wounds and were fully connected to the surrounding tissue when explanted after 11 days. The printed keratinocytes formed a multi-layered epidermis with beginning differentiation and stratum corneum. Proliferation of the keratinocytes was mainly detected in the suprabasal layers. In vitro controls, which were cultivated at the air-liquid-interface, also exhibited proliferative cells, but they were rather located in the whole epidermis. E-cadherin as a hint for adherens junctions and therefore tissue formation could be found in the epidermis in vivo as well as in vitro. In both conditions, the printed fibroblasts partly stayed on top of the underlying Matriderm® where they produced collagen, while part of them migrated into the Matriderm®. In the mice, some blood vessels could be found to grow from the wound bed and the wound edges in direction of the printed cells. In conclusion, we could show the successful 3D printing of a cell construct via LaBP and the subsequent tissue formation in vivo. These findings represent the prerequisite for the creation of a complex tissue like skin, consisting of different cell types in an intricate 3D pattern.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Singer, A. J., & Clark, R. A. F. (1999) · New England Journal of Medicine · doi:10.1056/nejm199909023411006 · Cited by 6,106
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Quantitative and reproducible murine model of excisional wound healing
Galiano, R. D., Michaels, V, Dobryansky, M., Levine, J. P., & Gurtner, G. C. (2004) · Wound Repair and Regeneration · doi:10.1111/j.1067-1927.2004.12404.x · Cited by 738
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Self-citationXu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Tissue engineering by self-assembly and bio-printing of living cells
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., & Forgacs, G. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/022001 · Cited by 593
Angiogenesis in Tissue Engineering: Breathing Life into Constructed Tissue Substitutes
Laschke, M. W., Harder, Y., Amon, M., Martin, I., Farhadi, J., Ring, A., Torio-Padron, N., Schramm, R., Rücker, M., Junker, D., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2093 · Cited by 546
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Engineered skin substitutes: practices and potentials
Supp, D. M., & Boyce, S. T. (2005) · Clinics in Dermatology · doi:10.1016/j.clindermatol.2004.07.023 · Cited by 520
Laser Printing of Skin Cells and Human Stem Cells
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 476
Self-citationIn vitro reconstruction of a human capillary‐like network in a tissue‐engineered skin equivalent
Black, A. F., Berthod, F., L'Heureux, N., Germain, L., & Auger, F. A. (1998) · The FASEB Journal · doi:10.1096/fasebj.12.13.1331 · Cited by 454
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 286
Self-citationCatros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Three-dimensional inkjet biofabrication based on designed images
Arai, K., Iwanaga, S., Toda, H., Genci, C., Nishiyama, Y., & Nakamura, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034113 · Cited by 167
Gruene, M., Pflaum, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Wilhelmi, M., Haverich, A., & Chichkov, B. N. (2011) · Biofabrication · doi:10.1088/1758-5082/3/1/015005 · Cited by 158
Self-citationTime-resolved imaging of hydrogel printing via laser-induced forward transfer
Unger, C., Gruene, M., Koch, L., Koch, J., & Chichkov, B. N. (2010) · Applied Physics A · doi:10.1007/s00339-010-6030-4 · Cited by 139
Self-citationDispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Gruene, M., Unger, C., Koch, L., Deiwick, A., & Chichkov, B. N. (2011) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-10-19 · Cited by 132
Self-citationHuman Keratinocytes Express the Three Major Splice Forms of Vascular Endothelial Growth Factor
Ballaun, C., Weninger, W., Uthman, A., Weich, H. A., & Tschachler, E. (1995) · Journal of Investigative Dermatology · doi:10.1111/1523-1747.ep12613450 · Cited by 126
Estimation of disruption of animal cells by laminar shear stress
Born, C., Zhang, Z., Al‐Rubeai, M., & Thomas, C. R. (1992) · Biotechnology and Bioengineering · doi:10.1002/bit.260400903 · Cited by 122
Migration of epidermal keratinocytes: mechanisms, regulation, and biological significance
Kirfel, G., & Herzog, V. (2004) · PROTOPLASMA · doi:10.1007/s00709-003-0031-5 · Cited by 113
Single-cell printing to form three-dimensional lines of olfactory ensheathing cells
Othon, C. M., Wu, X., Anders, J. J., & Ringeisen, B. R. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034101 · Cited by 108
Goren, I., Müller, E., Schiefelbein, D., Gutwein, P., Seitz, O., Pfeilschifter, J. M., & Frank, S. (2008) · Journal of Investigative Dermatology · doi:10.1038/jid.2008.230 · Cited by 91
Boyce, S. T., Medrano, E. E., ABDEL‐MALEK, Z. A., Supp, A. P., Dodick, J. M., Nordlund, J. J., & Warden, G. D. (1993) · Journal of Investigative Dermatology · doi:10.1111/1523-1747.ep12471822 · Cited by 84
Egaña, J. T., Fierro, F. A., Krüger, S., Bornhäuser, M., Huss, R., Lavandero, S., & Machens, H. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0097 · Cited by 82
Engraftment of a vascularized human skin equivalent
Schechner, J. S., Crane, S. K., Wang, F., Szeglin, A. M., Tellides, G., Lorber, M. I., Bothwell, A. L. M., & Pober, J. S. (2003) · The FASEB Journal · doi:10.1096/fj.03-0257com · Cited by 80
Application of inkjet printing technique for biological material delivery and antimicrobial assays
Zheng, Q., Lu, J., Chen, H., Huang, L., Cai, J., & Xu, Z. (2010) · Analytical Biochemistry · doi:10.1016/j.ab.2010.10.024 · Cited by 76
A novel approach for studying angiogenesis: A human skin equivalent with a capillary-like network
Black, A. F., Hudon, V., Damour, O., Germain, L., & Auger, F. A. (1999) · Cell Biology and Toxicology · doi:10.1023/a:1007541713398 · Cited by 52
Normal Human Epithelial Cells Regulate the Size and Morphology of Tissue-Engineered Capillaries
Rochon, M., Fradette, J., Fortin, V., Tomasetig, F., Roberge, C. J., Baker, K., Berthod, F., Auger, F. A., & Germain, L. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0090 · Cited by 50
Klingenberg, J. M., McFarland, K. L., Friedman, A. J., Boyce, S. T., Aronow, B. J., & Supp, D. M. (2009) · Journal of Investigative Dermatology · doi:10.1038/jid.2009.295 · Cited by 42
Kalyanaraman, B., & Boyce, S. T. (2008) · Journal of Surgical Research · doi:10.1016/j.jss.2008.04.001 · Cited by 27
Hacker, C., Valchanova, R., Adams, S., & Munz, B. (2010) · Growth Factors · doi:10.3109/08977190903578660 · Cited by 24
Xie, J. L., Li, T. Z., Qi, S., Huang, B., Chen, X. G., & Chen, J. D. (2006) · Journal of Plastic Reconstructive & Aesthetic Surgery · doi:10.1016/j.bjps.2005.12.062 · Cited by 23
Rasmussen, C. A., Gibson, A. L. F., Schlosser, S. J., Schurr, M. J., & Allen‐Hoffmann, B. L. (2010) · Annals of Surgery · doi:10.1097/sla.0b013e3181c1ab5f · Cited by 21
Couët, F., & Mantovani, D. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.15 · Cited by 8
Research works printed but not linked: 4
- PM Vogt, 2007, Innovative wound therapy and skin substitutes for burns, Der Chirurg; Zeitschrift Fur Alle Gebiete Der Operativen Medizen, 78, 335
- Ringeisen BR, Kim H, Young HD, Spargo BJ, Auyeung RCY, et al. (2001) Cell-by-cell construction of living tissue. 698. · doi:10.1557/proc-698-q5.1.1
- Michael S, Sorg H, Peck CT, Reimers K, Vogt PM (2012) The mouse dorsal skin fold chamber as a means for the analysis of tissue engineered skin. Burns : Journal of the International Society for Burn Injuries. · doi:10.1016/j.burns.2012.05.010
- Owczarczak AB, Shuford SO, Wood ST, Deitch S, Dean D (2012) Creating transient cell membrane pores using a standard inkjet printer. Journal of Visualized Experiments : JoVE (61). pii: 3681. doi:10.3791/3681. · doi:10.3791/3681
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Metadata
- Authors
- Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K.
- Venue
- PLoS ONE
- Publisher
- Public Library of Science (PLoS)
- Published
- 2013-03-04
- Volume
- 8
- Issue
- 3
- Pages
- e57741
- ISSN
- 1932-6203 (ISSN-L)
- OpenAlex
- W2162140499
- Cited by
- 623
- References
- 39
- FWCI
- 32.74
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.