Drop coalescence in technical liquid/liquid applications: a review on experimental techniques and modeling approaches
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
The coalescence phenomenon of drops in liquid/liquid systems is reviewed with particular focus on its technical relevance and application. Due to the complexity of coalescence, a comprehensive survey of the coalescence process and the numerous influencing factors is given. Subsequently, available experimental techniques with different levels of detail are summarized and compared. These techniques can be divided in simple settling tests for qualitative coalescence behavior investigations and gravity settler design, single-drop coalescence studies at flat interfaces as well as between droplets, and detailed film drainage analysis. To model the coalescence rate in liquid/liquid systems on a technical scale, the generic population balance framework is introduced. Additionally, different coalescence modeling approaches are reviewed with ascending level of detail from empirical correlations to comprehensive film drainage models and detailed computational fluid and particle dynamics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Force measurements with the atomic force microscope: Technique, interpretation and applications
Butt, H.-J., Cappella, B., & Kappl, M. (2005) · Surface Science Reports · doi:10.1016/j.surfrep.2005.08.003 · Cited by 4,297
Studies in Molecular Dynamics. I. General Method
Alder, B. J., & Wainwright, T. E. (1959) · The Journal of Chemical Physics · doi:10.1063/1.1730376 · Cited by 2,524
Some problems in particle technology
Hulburt, H. M., & Katz, S. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85047-8 · Cited by 1,670 · cited 1×
“…density distribution f(dp, t) of particles/drops with diameter dp within a certain volume by birth Ḃ and death terms Ḋ for droplet breakage and coalescence and convective flows fi·i over the balance boundaries (Randolph and Larson 1962, Hulburt and Katz 1964, Ramkrishna 1985, 2000, Kopriwa et al.”
BackgroundDescription of interaction processes in agitated liquid-liquid dispersions
Coulaloglou, C. A., & Tavlarides, L. L. (1977) · Chemical Engineering Science · doi:10.1016/0009-2509(77)85023-9 · Cited by 1,245 · cited 4×
“E E σλ ∝ (8) Anyhow, Sovova (1981) combined the energy model with the film drainage model of Coulaloglou and Tavlarides (1977).”
BackgroundMethodInfluentialBubble coalescence and break-up in air-sparged bubble columns
Prince, M. J., & Blanch, H. W. (1990) · AIChE Journal · doi:10.1002/aic.690361004 · Cited by 1,238
A discretized population balance for nucleation, growth, and aggregation
Hounslow, M. J., Ryall, R. L., & Marshall, V. R. (1988) · AIChE Journal · doi:10.1002/aic.690341108 · Cited by 995
Regimes of coalescence and separation in droplet collision
QIAN, J., & LAW, C. K. (1997) · Journal of Fluid Mechanics · doi:10.1017/s0022112096003722 · Cited by 841 · cited 3×
“In case of drop coalescence in gas continuous phase, the coalescence event can be described successfully depending on the drop size ratio, Weber number, and collision angle (Bradley and Stow 1978, Ashgriz and Poo 1990, Orme 1997, Qian and Law 1997, Estrade et al.”
BackgroundCoalescence and separation in binary collisions of liquid drops
Ashgriz, N., & Poo, J. Y. (1990) · Journal of Fluid Mechanics · doi:10.1017/s0022112090003536 · Cited by 753 · cited 2×
“In particular, one should mention the works of Ashgriz (Ashgriz and Givi 1987, 1989, Ashgriz and Poo 1990), Brenn (Brenn and Frohn 1989, Brenn et al.”
BackgroundCrude-Oil Emulsions: A State-Of-The-Art Review
Kokal, S. (2005) · SPE Production & Facilities · doi:10.2118/77497-pa · Cited by 714 · cited 1×
“This outcome is used extensively in crude oil processes and the used chemical mixtures are termed demulsifiers accordingly (Mikula and Munoz 2000, Kokal 2005, Pereira et al.”
MethodBreakage and coalescence models for drops in turbulent dispersions
Tsouris, C., & Tavlarides, L. L. (1994) · AIChE Journal · doi:10.1002/aic.690400303 · Cited by 544
Quadrature method of moments for aggregation-breakage processes
Marchisio, D. L., Vigil, R. D., & Fox, R. O. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(02)00054-1 · Cited by 524
An experimental investigation on the collision behaviour of hydrocarbon droplets
Jiang, Y. J., Umemura, A., & Law, C. K. (1992) · Journal of Fluid Mechanics · doi:10.1017/s0022112092000740 · Cited by 433
The Effects of Inorganic Solid Particles on Water and Crude Oil Emulsion Stability
Sullivan, A. P., & Kilpatrick, P. K. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010927n · Cited by 341 · cited 1×
“Apart from surfactants, fine solid particles also can adsorb at the interface, stabilize it, and hinder coalescence (Gafonova and Yarranton 2001, Sullivan and Kilpatrick 2002).”
BackgroundEstrade, J.-P., Carentz, H., Lavergne, G., & Biscos, Y. (1999) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(99)00036-3 · Cited by 210
Kamp, A. M., Chesters, A. K., Colin, C., & Fabre, J. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00010-6 · Cited by 161
Attarakih, M. (2013) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.08.001 · Cited by 25 · cited 2×
“1999, 2002, Attarakih et al. 2004, Kumar et al. 2007), there are other methods available (see Ramkrishna 2000 and Solsvik and Jakobsen 2015b for details). The calculation of the drop size distribution can be reduced to corresponding moments of the distribution, which results in faster computation time (Diemer and Olso…”
Method
Metadata
- Authors
- Kamp, J., Villwock, J., & Kraume, M.
- Venue
- Reviews in Chemical Engineering
- Publisher
- Walter de Gruyter GmbH
- Published
- 2016-07-07
- Volume
- 33
- Issue
- 1
- Pages
- 1-47
- ISSN
- 0167-8299 (ISSN-L)
- 2191-0235
- OpenAlex
- W2485501566
- Cited by
- 185
- References
- 16
- FWCI
- 9.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.