The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Greener reactants, renewable energies and environmental impact mitigation strategies in pyrometallurgical processes: A review
Open accessAbstract
Metals and alloys are among the most technologically important materials for our industrialized societies. They are the most common structural materials used in cars, airplanes and buildings, and constitute the technological core of most electronic devices. They allow the transportation of energy over great distances and are exploited in critical parts of renewable energy technologies. Even though primary metal production industries are mature and operate optimized pyrometallurgical processes, they extensively rely on cheap and abundant carbonaceous reactants (fossil fuels, coke), require high power heating units (which are also typically powered by fossil fuels) to calcine, roast, smelt and refine, and they generate many output streams with high residual energy content. Many unit operations also generate hazardous gaseous species on top of large CO 2 emissions which require gas-scrubbing and capture strategies for the future. Therefore, there are still many opportunities to lower the environmental footprint of key pyrometallurgical operations. This paper explores the possibility to use greener reactants such as bio-fuels, bio-char, hydrogen and ammonia in different pyrometallurgical units. It also identifies all recycled streams that are available (such as steel and aluminum scraps, electronic waste and Li-ion batteries) as well as the technological challenges associated with their integration in primary metal processes. A complete discussion about the alternatives to carbon-based reduction is constructed around the use of hydrogen, metallo-reduction as well as inert anode electrometallurgy. The review work is completed with an overview of the different approaches to use renewable energies and valorize residual heat in pyrometallurgical units. Finally, strategies to mitigate environmental impacts of pyrometallurgical operations such as CO 2 capture utilization and storage as well as gas scrubbing technologies are detailed. This original review paper brings together for the first time all potential strategies and efforts that could be deployed in the future to decrease the environmental footprint of the pyrometallurgical industry. It is primarily intended to favour collaborative work and establish synergies between academia, the pyrometallurgical industry, decision-makers and equipment providers. Graphical abstract: Highlights: A more sustainable production of metals using greener reactants, green electricity or carbon capture is possible and sometimes already underway. More investments and pressure are required to hasten change. Discussion: Is there enough pressure on the aluminum and steel industries to meet the set climate targets? The greenhouse gas emissions of existing facilities can often be partly mitigated by retrofitting them with green technologies, should we close plants prematurely to build new plants using greener technologies? Since green or renewable resources presently have limited availability, in which sector should we use them to maximize their benefits?
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
A review on fundamentals for designing oxygen evolution electrocatalysts
Song, J., Wei, C., Huang, Z.-F., Liu, C., Zeng, L., Wang, X., & Xu, Z. J. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00607a · Cited by 2,936
Hosseini, S. E., & Wahid, M. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.112 · Cited by 2,567
A review of mineral carbonation technologies to sequester CO 2
Sanna, A., Uibu, M., Caramanna, G., Kuusik, R., & Maroto-Valer, M. M. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00035h · Cited by 1,258
Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes
Kaya, M. (2016) · Waste Management · doi:10.1016/j.wasman.2016.08.004 · Cited by 823
Promising evolution of biofuel generations. Subject review
Alalwan, H. A., Alminshid, A. H., & Aljaafari, H. A. S. (2019) · Renewable Energy Focus · doi:10.1016/j.ref.2018.12.006 · Cited by 505
Sustainability of the four generations of biofuels – A review
Mat Aron, N. S., Khoo, K. S., Chew, K. W., Show, P. L., Chen, W., & Nguyen, T. H. P. (2020) · International Journal of Energy Research · doi:10.1002/er.5557 · Cited by 479
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Ghodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Present and Projected Developments in Hydrogen Production: A Technological Review
Nnabuife, S. G., Ugbeh-Johnson, J., Okeke, N. E., & Ogbonnaya, C. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100042 · Cited by 227
Cited by
Decarbonizing lithium-ion battery primary raw materials supply chain
Istrate, R., Mas-Fons, A., Beylot, A., Northey, S., Vaidya, K., Sonnemann, G., Kleijn, R., & Steubing, B. (2024) · Joule · doi:10.1016/j.joule.2024.10.003 · Cited by 60
Metadata
- Authors
- Harvey, J.-P., Courchesne, W., Vo, M. D., Oishi, K., Robelin, C., Mahue, U., Leclerc, P., & Al-Haiek, A.
- Venue
- MRS Energy & Sustainability
- Published
- 2022-09
- Volume
- 9
- Issue
- 2
- Pages
- 212-247
- ISSN
- 2329-2229 (ISSN-L)
- 2329-2237
- OpenAlex
- W4294891777
- Cited by
- 194
- References
- 14
- FWCI
- 13.93
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Greener reactants, renewable energies and environmental impact mitigation strategies in pyrometallurgical processes: A review. https://app.cochat.ai/papers/10.1557/s43581-022-00042-y
- The paper
- Harvey, J.-P., Courchesne, W., Vo, M. D., Oishi, K., Robelin, C., Mahue, U., Leclerc, P., & Al-Haiek, A. (2022). Greener reactants, renewable energies and environmental impact mitigation strategies in pyrometallurgical processes: A review. MRS Energy & Sustainability. https://doi.org/10.1557/s43581-022-00042-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.