The DOI matches its Crossref record.
Safety Evaluation of Physical Human-Robot Interaction via Crash-Testing
Open accessAbstract
The light-weight robots developed at the German Aerospace Center (DLR) are characterized by their low inertial properties, torque sensing in each joint and a load to weight ratio similar to humans.These properties qualify them for applications requiring high mobility and direct interaction with human users or uncertain environments.An essential requirement for such a robot is that it must under no circumstances pose a threat to the human operator.To actually quantify the potential injury risk emanating from the manipulator, impact test were carried out using standard automobile crash-test facilities at the ADAC 1 .In our evaluation we focused on unexpected rigid frontal impacts, i.e. injuries e.g.caused by sharp edges are excluded.Several injury mechanisms and so called Severity Indices are evaluated and discussed with respect to their adaptability to physical human-robotic interaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Cooperation of human and machines in assembly lines
Krüger, J., Lien, T. K., & Verl, A. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.09.009 · Cited by 845
Working Together: A Review on Safe Human-Robot Collaboration in Industrial Environments
Robla-Gomez, S., Becerra, V. M., Llata, J. R., Gonzalez-Sarabia, E., Torre-Ferrero, C., & Perez-Oria, J. (2017) · IEEE Access · doi:10.1109/access.2017.2773127 · Cited by 589
“Even though the AIS and MAIS indices are categorical and therefore have no associated numerical scale to measure injuries [35], some empirical relationships between the AIS (or MAIS) categories and HIC have been proposed [11], [35], [36].”
BackgroundSymbiotic human-robot collaborative assembly
Wang, L., Gao, R., Váncza, J., Krüger, J., Wang, X. V., Makris, S., & Chryssolouris, G. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.002 · Cited by 565
Collision Detection and Reaction: A Contribution to Safe Physical Human-Robot Interaction
Haddadin, S., Albu-Schaffer, A., De Luca, A., & Hirzinger, G. (2008) · 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2008.4650764 · Cited by 562
Self-citationAlbu-Schaffer, A., Eiberger, O., Grebenstein, M., Haddadin, S., Ott, C., Wimbock, T., Wolf, S., & Hirzinger, G. (2008) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2008.927979 · Cited by 506
Self-citationVariable Stiffness Actuators: Review on Design and Components
Wolf, S., Grioli, G., Eiberger, O., Friedl, W., Grebenstein, M., Hoppner, H., Burdet, E., Caldwell, D. G., Carloni, R., Catalano, M. G., et al. (2016) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2015.2501019 · Cited by 459
Requirements for Safe Robots: Measurements, Analysis and New Insights
Haddadin, S., Albu-Schäffer, A., & Hirzinger, G. (2009) · The International Journal of Robotics Research · doi:10.1177/0278364909343970 · Cited by 444
Self-citationGrebenstein, M., Albu-Schaffer, A., Bahls, T., Chalon, M., Eiberger, O., Friedl, W., Gruber, R., Haddadin, S., Hagn, U., Haslinger, R., et al. (2011) · 2011 IEEE International Conference on Robotics and Automation · doi:10.1109/icra.2011.5980371 · Cited by 436
Self-citationWaibel, M., Beetz, M., Civera, J., D'Andrea, R., Elfring, J., Gálvez-López, D., Häussermann, K., Janssen, R., Montiel, J. M. M., Perzylo, A., et al. (2011) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2011.941632 · Cited by 429
Safety bounds in human robot interaction: A survey
Zacharaki, A., Kostavelis, I., Gasteratos, A., & Dokas, I. (2020) · Safety Science · doi:10.1016/j.ssci.2020.104667 · Cited by 291
DLR MiroSurge: a versatile system for research in endoscopic telesurgery
Hagn, U., Konietschke, R., Tobergte, A., Nickl, M., Jörg, S., Kübler, B., Passig, G., Gröger, M., Fröhlich, F., Seibold, U., et al. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-009-0372-4 · Cited by 270
Self-citationPark, J. H., Kim, K., Gong, Y. J., Yang, S. Y., Hwang, S. T., Jung, H. S., Moon, H., Koo, J. C., Rodrigue, H., & Choi, H. R. (2024) · Mechatronics · doi:10.1016/j.mechatronics.2023.103099 · Cited by 15
Metadata
- Authors
- Haddadin, S., Albu-Schaeffer, A., & Hirzinger, G.
- Venue
- Robotics: Science and Systems III
- Published
- 2007-06-27
- OpenAlex
- W1579753478
- Cited by
- 231
- References
- 0
- FWCI
- 30.38
- Type
- conference paper
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.