The DOI matches its Crossref record.
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Open accessAbstract
In recent years, hydrogels have been used as important biomaterials for 3D printing of three dimensional tissues or organs. The key issue for printing a successful scaffold is the selection of a material with a good printability. Rheological properties of hydrogels are believed to pay an important role in 3D printability. However the relations between rheological properties of hydrogels and 3D printability have not been extensively studied. In this study, alginate-based hydrogels were prepared as a model material for an extrusion-based printer and graphene oxide was added to modify the rheological properties and 3D printability of the hydrogels. Rheological studies were performed for the hydrogel samples with different formulas. The range of shear rates that the hydrogels suffered during the printing process was deduced. This range of shear rates helped us to select a proper shear rate to investigate the thixotropic properties of the hydrogels. Furthermore, we also defined some measureable parameters to describe and discuss the quality of 3D printing. The present study shows a new approach to analysis of 3D printability of a hydrogel and also provides some suggestion for 3D printing of 3D scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Liu, Z., Bhandari, B., Prakash, S., Mantihal, S., & Zhang, M. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.08.026 · Cited by 530
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
4D Printing of Hydrogels: A Review
Champeau, M., Heinze, D. A., Viana, T. N., de Souza, E. R., Chinellato, A. C., & Titotto, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910606 · Cited by 443
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00093 · Cited by 320
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
3D neural tissue models: From spheroids to bioprinting
Zhuang, P., Sun, A. X., An, J., Chua, C. K., & Chew, S. Y. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.10.002 · Cited by 270
Printability–A key issue in extrusion-based bioprinting
Naghieh, S., & Chen, X. (2021) · Journal of Pharmaceutical Analysis · doi:10.1016/j.jpha.2021.02.001 · Cited by 270
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
New Trends in Biotechnological Applications of Photosynthetic Microorganisms
Dawiec-Liśniewska, A., Podstawczyk, D., Bastrzyk, A., Czuba, K., Pacyna-Iwanicka, K., Okoro, O. V., & Shavandi, A. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2022.107988 · Cited by 66
Metadata
- Authors
- Li, H., Liu, S., & Li, L.
- Venue
- International Journal of Bioprinting
- Publisher
- AccScience Publishing
- Published
- 2024-08-05
- Volume
- 2
- Issue
- 2
- Pages
- 54
- ISSN
- 2424-7723 (ISSN-L)
- 2424-8002
- OpenAlex
- W2489602289
- Cited by
- 239
- References
- 0
- FWCI
- 9.89
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.