The DOI matches its Crossref record; 191 of the 191 references it cites were found in a registry or an index.
An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability
Abstract
Abstract Three dimensional bioprinting is an emerging fabrication technique in the field of tissue engineering. Extrusion-based bioprinting is one of the widely employed biofabrication techniques; researchers tend to use it because of its simplicity, affordability and scalability. During the extrusion-based bioprinting process, cells are subjected to mechanical forces of different kinds. Among these mechanical forces, shear stress is of a special significance and concern as it is considered the main cause of cell damage/death. This review covers the principle of extrusion-based bioprinting, and highlights extrusion-based bioprinting induced shear stress, how cells sense it and respond to it. Moreover, it discusses the bioinks that are commonly used in extrusion-based bioprinting along with their properties that have proven to have an effect on process induced shear stress and cell viability. In addition, it discusses, in detail, the relationship between shear stress, cell viability and different material properties and printing parameters. Furthermore, it provides examples of successfully extrusion-based bioprinted 3D tissues. Finally, it sheds light upon approaches to overcome shear stress effect and therefore preserve cell viability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Hydrogels in pharmaceutical formulations
Peppas, N. (2000) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(00)00090-4 · Cited by 4,011
Mechanotransduction Across the Cell Surface and Through the Cytoskeleton
Wang, N., Butler, J. P., & Ingber, D. E. (1993) · Science · doi:10.1126/science.7684161 · Cited by 3,003
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Local force and geometry sensing regulate cell functions
Vogel, V., & Sheetz, M. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1890 · Cited by 2,328
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Mechanotransduction and extracellular matrix homeostasis
Humphrey, J. D., Dufresne, E. R., & Schwartz, M. A. (2014) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm3896 · Cited by 2,124
Cited by
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Portable hand-held bioprinters promote in situ tissue regeneration
Pazhouhnia, Z., Beheshtizadeh, N., Namini, M. S., & Lotfibakhshaiesh, N. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10307 · Cited by 60
Drug screening at single-organoid resolution via bioprinting and interferometry
Tebon, P. J., Wang, B., Markowitz, A. L., Davarifar, A., Krawczuk, P., Murray, G., Nguyen, H. T. L., Tavanaie, N., Nguyen, T. L., Boutros, P. C., et al. (2021) · doi:10.1101/2021.10.03.462896 · Cited by 155
Metadata
- Authors
- Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C.
- Venue
- Bioprinting
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 20
- Pages
- e00093
- ISSN
- 2405-8866 (ISSN-L)
- OpenAlex
- W3049691363
- Cited by
- 320
- References
- 191
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability. https://app.cochat.ai/papers/10.1016/j.bprint.2020.e00093
- The paper
- Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020). An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability. Bioprinting. https://doi.org/10.1016/j.bprint.2020.e00093
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
