The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Surgical applications of three-dimensional printing: a review of the current literature & how to get started
Open accessAbstract
Three dimensional (3D) printing involves a number of additive manufacturing techniques that are used to build structures from the ground up. This technology has been adapted to a wide range of surgical applications at an impressive rate. It has been used to print patient-specific anatomic models, implants, prosthetics, external fixators, splints, surgical instrumentation, and surgical cutting guides. The profound utility of this technology in surgery explains the exponential growth. It is important to learn how 3D printing has been used in surgery and how to potentially apply this technology. PubMed was searched for studies that addressed the clinical application of 3D printing in all surgical fields, yielding 442 results. Data was manually extracted from the 168 included studies. We found an exponential increase in studies addressing surgical applications for 3D printing since 2011, with the largest growth in craniofacial, oromaxillofacial, and cardiothoracic specialties. The pertinent considerations for getting started with 3D printing were identified and are discussed, including, software, printing techniques, printing materials, sterilization of printing materials, and cost and time requirements. Also, the diverse and increasing applications of 3D printing were recorded and are discussed. There is large array of potential applications for 3D printing. Decreasing cost and increasing ease of use are making this technology more available. Incorporating 3D printing into a surgical practice can be a rewarding process that yields impressive results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review
Martelli, N., Serrano, C., van den Brink, H., Pineau, J., Prognon, P., Borget, I., & El Batti, S. (2016) · Surgery · doi:10.1016/j.surg.2015.12.017 · Cited by 681
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Three-dimensional printing in surgery: a review of current surgical applications
Malik, H. H., Darwood, A. R. J., Shaunak, S., Kulatilake, P., El-Hilly, A. A., Mulki, O., & Baskaradas, A. (2015) · Journal of Surgical Research · doi:10.1016/j.jss.2015.06.051 · Cited by 370
Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education
Bernhard, J., Isotani, S., Matsugasumi, T., et al. (2015) · World Journal of Urology · doi:10.1007/s00345-015-1632-2 · Cited by 368
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Three-dimensional print of a liver for preoperative planning in living donor liver transplantation
Zein, N. N., Hanouneh, I. A., Bishop, P. D., Samaan, M., Eghtesad, B., Quintini, C., Miller, C., Yerian, L., & Klatte, R. (2013) · Liver Transplantation · doi:10.1002/lt.23729 · Cited by 326
Xu, N., Wei, F., Liu, X., Jiang, L., Cai, H., Li, Z., Yu, M., Wu, F., & Liu, Z. (2016) · SPINE · doi:10.1097/brs.0000000000001179 · Cited by 291
Regulatory Considerations in the Design and Manufacturing of Implantable 3D‐Printed Medical Devices
Morrison, R. J., Kashlan, K. N., Flanangan, C. L., Wright, J. K., Green, G. E., Hollister, S. J., & Weatherwax, K. J. (2015) · Clinical and Translational Science · doi:10.1111/cts.12315 · Cited by 290
Three-dimensional printing surgical instruments: are we there yet?
Rankin, T. M., Giovinco, N. A., Cucher, D. J., Watts, G., Hurwitz, B., & Armstrong, D. G. (2014) · Journal of Surgical Research · doi:10.1016/j.jss.2014.02.020 · Cited by 275
Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology
Kim, G. B., Lee, S., Kim, H., Yang, D. H., Kim, Y.-H., Kyung, Y. S., Kim, C.-S., Choi, S. H., Kim, B. J., Ha, H., et al. (2016) · Korean Journal of Radiology · doi:10.3348/kjr.2016.17.2.182 · Cited by 243
Mashiko, T., Otani, K., Kawano, R., Konno, T., Kaneko, N., Ito, Y., & Watanabe, E. (2015) · World Neurosurgery · doi:10.1016/j.wneu.2013.10.032 · Cited by 228
Ploch, C. C., Mansi, C. S. S. A., Jayamohan, J., & Kuhl, E. (2016) · World Neurosurgery · doi:10.1016/j.wneu.2016.02.081 · Cited by 195
Kurenov, S. N., Ionita, C., Sammons, D., & Demmy, T. L. (2015) · The Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2014.12.059 · Cited by 188
Olivieri, L. J., Krieger, A., Loke, Y.-H., Nath, D. S., Kim, P. C. W., & Sable, C. A. (2015) · Journal of the American Society of Echocardiography · doi:10.1016/j.echo.2014.12.016 · Cited by 182
Costello, J. P., Olivieri, L. J., Krieger, A., Thabit, O., Marshall, M. B., Yoo, S.-J., Kim, P. C., Jonas, R. A., & Nath, D. S. (2014) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135114528721 · Cited by 170
Multi-material 3D Models for Temporal Bone Surgical Simulation
Rose, A. S., Kimbell, J. S., Webster, C. E., Harrysson, O. L. A., Formeister, E. J., & Buchman, C. A. (2015) · Annals of Otology, Rhinology & Laryngology · doi:10.1177/0003489415570937 · Cited by 162
Byrne, N., Forte, M. N. V., Tandon, A. A., Valverde, I., & Hussain, T. (2016) · JRSM Cardiovascular Disease · doi:10.1177/2048004016645467 · Cited by 156
3 D printed models for planning endovascular stenting in transverse aortic arch hypoplasia
Valverde, I., Gomez-Ciriza, G., Coserria, J. F., Suárez-Mejías, C., Uribe, S. A., Sotelo, J. A., Forte, M. N. V., de Soto, J. S., Hosseinpour, A., & Gómez‐Cía, T. (2015) · Catheterization and Cardiovascular Interventions · doi:10.1002/ccd.25810 · Cited by 150
Flügge, T. V., Nelson, K., Schmelzeisen, R., & Metzger, M. C. (2013) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.joms.2013.04.010 · Cited by 143
Schmauß, D., Schmitz, C., Bigdeli, A. K., Weber, S., Gerber, N., Beiras-Fernández, A., Schwarz, F., Becker, C. R., Kupatt, C., & Sodian, R. (2012) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2011.09.031 · Cited by 143
Zopf, D., Mitsak, A. G., Flanagan, C. L., et al. (2014) · Otolaryngology · doi:10.1177/0194599814552065 · Cited by 141
Ryan, J. R., Almefty, K. K., Nakaji, P., & Frakes, D. H. (2016) · World Neurosurgery · doi:10.1016/j.wneu.2015.12.102 · Cited by 131
Tam, M. D. B. S., Laycock, S. D., Brown, J. R., & Jakeways, M. (2013) · Journal of Endovascular Therapy · doi:10.1583/13-4450mr.1 · Cited by 130
Pre-operative simulation of pediatric mastoid surgery with 3D-printed temporal bone models
Rose, A. S., Webster, C. E., Harrysson, O. L. A., Formeister, E. J., Rawal, R. B., & Iseli, C. (2015) · International Journal of Pediatric Otorhinolaryngology · doi:10.1016/j.ijporl.2015.03.004 · Cited by 116
Gosnell, J. M., Pietila, T., Samuel, B. P., Kurup, H. K. N., Haw, M. P., & Vettukattil, J. J. (2016) · Journal of Imaging Informatics in Medicine · doi:10.1007/s10278-016-9879-8 · Cited by 113
Three-dimensional printing of models for surgical planning in patients with primary cardiac tumors
Schmauß, D., Gerber, N., & Sodian, R. (2013) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2012.12.030 · Cited by 110
Garekar, S., Bharati, A. H., Chokhandre, M., Mali, S., Trivedi, B. Y., Changela, V., Solanki, N., Gaikwad, S., & Agarwal, V. (2016) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135116645604 · Cited by 106
Three-dimensional patient-specific cardiac model for surgical planning in Nikaidoh procedure
Valverde, I., Gomez-Ciriza, G., González, A. L., Suárez-Mejías, C., Adsuar, A., Coserria, J. F., Uribe, S. A., Gómez‐Cía, T., & Hosseinpour, A. (2014) · Cardiology in the Young · doi:10.1017/s1047951114000742 · Cited by 105
Sodian, R., Weber, S., Markert, M., Loeff, M., Lueth, T. C., Weis, F. C., Daebritz, S. H., Malec, E. J., Schmitz, C., & Reichart, B. (2008) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2008.03.055 · Cited by 105
Király, L., Tofeig, M., Jha, N. K., & Talo, H. (2015) · Interactive Cardiovascular and Thoracic Surgery · doi:10.1093/icvts/ivv320 · Cited by 105
Wu, X., Wang, J., Zhao, C., Sun, X., Shi, Y., Zhang, Z.-A., Li, Y.-N., & Wang, M. (2015) · Chinese Medical Journal · doi:10.4103/0366-6999.151088 · Cited by 102
Gillaspie, E. A., Matsumoto, J. M. S., Morris, N. E., Downey, R. J., Shen, K. R., Allen, M. S., & Blackmon, S. H. (2016) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2015.12.075 · Cited by 102
Computer-aided design and three-dimensional printing in the manufacturing of an ocular prosthesis
Ruiters, S., Sun, Y., de Jong, S., Politis, C., & Mombaerts, I. (2016) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2016-308399 · Cited by 93
Dhir, V. K., Itoi, T., Fockens, P., et al. (2014) · Gastrointestinal Endoscopy · doi:10.1016/j.gie.2014.09.011 · Cited by 88
Yang, D. H., Kang, J., Kim, N., Song, J., Lee, J., & Lim, T. (2015) · Circulation · doi:10.1161/circulationaha.115.015842 · Cited by 85
Wang, Y., Yang, X., Yan, B., Zeng, T.-H., Qiu, Y., & Chen, S. (2016) · Chinese Journal of Traumatology · doi:10.1016/j.cjtee.2015.09.009 · Cited by 80
Ryan, J. R., Chen, T., Nakaji, P., Frakes, D. H., & Gonzalez, L. F. (2015) · World Neurosurgery · doi:10.1016/j.wneu.2015.06.016 · Cited by 79
MRI compatible head phantom for ultrasound surgery
Menikou, G., Dadakova, T., Pavlina, M., Bock, M., & Damianou, C. (2014) · Ultrasonics · doi:10.1016/j.ultras.2014.11.004 · Cited by 76
Three-Dimensional Printing for Perioperative Planning of Complex Aortic Arch Surgery
Schmauß, D., Juchem, G., Weber, S., Gerber, N., Hagl, C. M., & Sodian, R. (2014) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2014.02.011 · Cited by 73
Li, C., Yang, M., Xie, Y., Chen, K., Wang, C., Bai, Y., Zhu, X., & Li, M. (2015) · Journal of Orthopaedic Science · doi:10.1007/s00776-015-0706-8 · Cited by 70
Mahmoud, A., & Bennett, M. (2015) · Archives of Pathology & Laboratory Medicine · doi:10.5858/arpa.2014-0408-oa · Cited by 69
Park, J. H., Lee, Y., Shon, O., Shon, H., & Kim, J. W. (2016) · Injury · doi:10.1016/j.injury.2016.02.026 · Cited by 67
Computer-assisted virtual planning and surgical template fabrication for frontoorbital advancement
Soleman, J., Thieringer, F. M., Beinemann, J., Kunz, C., & Guzman, R. G. (2015) · Neurosurgical FOCUS · doi:10.3171/2015.3.focus14852 · Cited by 66
Berens, A., Newman, S. S., Bhrany, A. D., Murakami, C. S., Sie, K. C. Y., & Zopf, D. A. (2016) · Otolaryngology · doi:10.1177/0194599816639586 · Cited by 65
Use of a Three Dimensional Printed Cardiac Model to Assess Suitability for Biventricular Repair
Farooqi, K. M., Gonzalez-Lengua, C. A., Shenoy, R., et al. (2016) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135115610285 · Cited by 55
Bos, E. J., Scholten, T., Song, Y., Verlinden, J. C., Wolff, J., Forouzanfar, T., Helder, M. N., & van Zuijlen, P. P. M. (2015) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.12.016 · Cited by 54
Waran, V., Menon, R., Pancharatnam, D., Rathinam, A. K., Balakrishnan, Y. K., Tung, T. S., Raman, R., Prepageran, N., Chandran, H., & Rahman, Z. A. A. (2012) · American Journal of Rhinology and Allergy · doi:10.2500/ajra.2012.26.3808 · Cited by 52
Airway Stent Insertion Simulated With a Three-Dimensional Printed Airway Model
Miyazaki, T., Yamasaki, N., Tsuchiya, T., Matsumoto, K., Takagi, K., & Nagayasu, T. (2014) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2014.10.021 · Cited by 51
Chae, M. P., Hunter‐Smith, D. J., Silva, I. D., Tham, S., Spychal, R., & Rozen, W. M. (2015) · Journal of Reconstructive Microsurgery · doi:10.1055/s-0035-1549006 · Cited by 47
Customised 3D Printing: An Innovative Training Tool for the Next Generation of Orbital Surgeons
Scawn, R. L., Foster, A., Lee, B. W., Kikkawa, D. O., & Korn, B. S. (2015) · Orbit · doi:10.3109/01676830.2015.1049367 · Cited by 44
Patient specific biomodel of the whole aorta - the importance of calcified plaque removal
Håkansson, Rantatalo, Hansen, & Wanhainen (2011) · VASA · doi:10.1024/0301-1526/a000148 · Cited by 43
Improved Construction of Auricular Prosthesis by Digital Technologies
Nuseir, A., Hatamleh, M. M., Watson, J., et al. (2015) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000002012 · Cited by 41
Maeda, M., Kanai, N., Kobayashi, S., et al. (2015) · Gastrointestinal Endoscopy · doi:10.1016/j.gie.2015.01.062 · Cited by 40
Ruzza, A., Parekh, M., Ferrari, S., Salvalaio, G., Nahum, Y., Bovone, C., Ponzin, D., & Busin, M. (2015) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2014-306510 · Cited by 40
The Use of Three-dimensional Printers for Partial Adrenalectomy: Estimating the Resection Limits
Srougi, V., Rocha, B. A., Tanno, F. Y., Almeida, M. Q., Baroni, R. H., Mendonca, B. B., Srougi, M., Fragoso, M. C. B. V., & Chambo, J. L. (2016) · Urology · doi:10.1016/j.urology.2015.11.043 · Cited by 40
CAD/CAM silicone simulator for teaching cheiloplasty: description of the technique
Zheng, Y., Lu, B., Zhang, J., & Wu, G. (2014) · British Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.bjoms.2014.10.001 · Cited by 39
del Junco, M., Okhunov, Z., Yoon, R., Khanipour, R., Juncal, S., Abedi, G., Lusch, A., & Landman, J. (2014) · Journal of Endourology · doi:10.1089/end.2014.0280 · Cited by 39
Individualizing Management of Complex Esophageal Pathology Using Three-Dimensional Printed Models
Dickinson, K. J., Matsumoto, J. M. S., Cassivi, S. D., Reinersman, J. M., Fletcher, J. G., Morris, J., Song, L. M. W. K., & Blackmon, S. H. (2015) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2015.03.115 · Cited by 38
A new design of CAD/CAM surgical template system for two-piece narrowing genioplasty
Li, B., Shen, S. G., Yu, H., Li, J., Xia, J. J., & Wang, X. (2015) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2015.10.013 · Cited by 35
ElePhant - An anatomical Electronic Phantom as simulation-system for otologic surgery
Grunert, R., Schulz, T., Oeken, J., Dietz, A., Korb, W., Strauß, G., Moeckel, H., Hofer, M., Pößneck, A., Fickweiler, U., et al. (2006) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.2006.260542 · Cited by 31
Preliminary Evaluation of a Novel Thoracoscopic Infant Lobectomy Simulator
Barsness, K. A., Rooney, D. M., Davis, L. M., et al. (2014) · Journal of Laparoendoscopic & Advanced Surgical Techniques · doi:10.1089/lap.2014.0364 · Cited by 24
On-demand three-dimensional printing of surgical supplies in conflict zones
Yu, A. W., & Khan, M. A. (2015) · The Journal of Trauma: Injury, Infection, and Critical Care · doi:10.1097/ta.0000000000000481 · Cited by 22
Development and evaluation of a 3D printed endoscopic ampullectomy training model (with video)
Holt, B. A., Hearn, G., Hawes, R. H., et al. (2015) · Gastrointestinal Endoscopy · doi:10.1016/j.gie.2015.03.1916 · Cited by 19
Using Three-Dimensional Printing to Fabricate a Tubing Connector for Dilation and Evacuation
Stitely, M. L., & Paterson, H. (2016) · Obstetrics and Gynecology · doi:10.1097/aog.0000000000001237 · Cited by 14
Cited by
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Popescu, D., Zapciu, A., Amza, C., Baciu, F., & Marinescu, R. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.05.020 · Cited by 1,015
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
Honigmann, P., Sharma, N., Okolo, B., Popp, U., Msallem, B., & Thieringer, F. M. (2018) · BioMed Research International · doi:10.1155/2018/4520636 · Cited by 275
Metadata
- Authors
- Hoang, D., Perrault, D., Stevanovic, M., & Ghiassi, A.
- Venue
- Annals of Translational Medicine
- Publisher
- AME Publishing Company
- Published
- 2016-12
- Volume
- 4
- Issue
- 23
- Pages
- 456-456
- ISSN
- 2305-5839 (ISSN-L)
- 2305-5847
- OpenAlex
- W2563457968
- Cited by
- 317
- References
- 64
- FWCI
- 14.44
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.