The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
The relationship between the design, position, and articular wear of acetabular components inserted without cement and the development of pelvic osteolysis.
Abstract
Between 1983 and 1987, an acetabular component with a unique chamfered-cylinder design was inserted without cement in 134 hips. With use of this design, initial stability is achieved through a cylindrical interference fit with the peripheral rim of the acetabulum, without the need for pegs, spikes, or screws. At an average of sixty-four months (range, forty to ninety-six months) after implantation, follow-up data were available for 113 hips (ninety-three patients). No component had been revised for loosening or was radiographically loose. However, the prevalence of balloon-like osteolysis of the pelvis was 17 per cent (nineteen hips). This bone loss was generally not associated with pain or other symptoms. Ten of the nineteen hips that were associated with pelvic osteolysis (including six of the nine that were associated with osteolysis of the ilium) had been reconstructed with use of an acetabular component that had no holes in the shell (that is, the shell was completely solid). This finding indicates that, while elimination of holes through the acetabular shell may have advantages, it will not prevent pelvic osteolysis. The osteolysis of the ilium was associated with a lateral opening of the acetabular component of more than 50 degrees (p < 0.0001). All of the hips in this series had insertion of a porous-ingrowth femoral resurfacing component made of titanium alloy. These components are no longer used. Revision of the femoral side due to osteolysis provided a unique opportunity to inspect directly forty-two clinically well functioning acetabular components. All of the polyethylene liners and acetabular shells were found to be rigidly fixed. Inflammatory tissue at the periphery of the implant-bone interface resulted in circumferential resorption of periacetabular bone despite rigid fixation of the component. This is direct evidence that a process of bone resorption similar to that reported at the cement-bone interface of cemented acetabular components can occur at the implant-bone interface of components inserted without cement. At the reoperation, a communication that had led to the pelvic osteolysis was found through areas of bone resorption at the periphery of the implant-bone interface. These areas were essentially cystic and were filled with a mixture of fluid and friable, yellow-tan tissue. It appeared that the osteolytic process had expanded into the soft cancellous bone and marrow while being contained by the denser cortical shell of the pelvic bones.(ABSTRACT TRUNCATED AT 250 WORDS)
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Radiological Demarcation of Cemented Sockets in Total Hip Replacement
Banaszkiewicz, P. A. (2014) · Classic Papers in Orthopaedics · doi:10.1007/978-1-4471-5451-8_9 · Cited by 2,516
Schmalzried, T. P., Jasty, M., & Harris, W. H. (1992) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199274060-00006 · Cited by 989
Self-citationSCHMALZRIED, T. P., KWONG, L. M., JASTY, M., SEDLACEK, R. C., HAIRE, T. C., O'CONNOR, D. O., BRAGDON, C. R., KABO, J. M., MALCOLM, A. J., & HARRIS, W. H. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00009 · Cited by 443
Self-citationAggressive granulomatous lesions in cementless total hip arthroplasty
Santavirta, S., Hoikka, V, Eskola, A., Konttinen, Y., Paavilainen, T., & Tallroth, K. (1990) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.72b6.2246301 · Cited by 241
Cementless acetabular components
Engh, C., Griffin, W., & Marx, C. (1990) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.72b1.2298795 · Cited by 224
A study of implant failure in the Wagner resurfacing arthroplasty.
Bell, R. S., Schatzker, J., Fornasier, V. L., & Goodman, S. B. (1985) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-198567080-00004 · Cited by 192
Immunopathological response to loose cementless acetabular components
Santavirta, S. S., Konttinen, Y., Hoikka, V., & Eskola, A. (1991) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.73b1.1991772 · Cited by 144
Rapidly Destructive Arthropathy of the Hip
Komiya, S., Inoue, A. K., SASAGURI, Y., et al. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199211000-00038 · Cited by 77
Cited by
The role of macrophages in osteolysis of total joint replacement
Ingham, E., & Fisher, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.035 · Cited by 667
Current Concepts Review - Wear in Total Hip and Knee Replacements*
SCHMALZRIED, T. P., & CALLAGHAN, J. J. (1999) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199901000-00016 · Cited by 395
Self-citationThe pathology of total joint arthroplasty
Bauer, T. W., & Schils, J. (1999) · Skeletal Radiology · doi:10.1007/s002560050552 · Cited by 367
Comparison of a mechanical acetabular alignment guide with computer placement of the socket
DiGioia, A. M., Jaramaz, B., Plakseychuk, A. Y., Moody, J. E., Nikou, C., LaBarca, R. S., Levison, T. J., & Picard, F. (2002) · The Journal of Arthroplasty · doi:10.1054/arth.2002.30411 · Cited by 340
Determination of Polyethylene Wear in Total Hip Replacements with Use of Digital Radiographs*
Martell, J. M., & Berdia, S. (1997) · The Journal of Bone and Joint Surgery (American Volume) · doi:10.2106/00004623-199711000-00004 · Cited by 321
Metadata
- Authors
- Schmalzried, T. P., Guttmann, D., Grecula, M., & Amstutz, H. C.
- Venue
- The Journal of Bone & Joint Surgery
- Published
- 1994-05
- Volume
- 76
- Issue
- 5
- Pages
- 677-688
- ISSN
- 0021-9355 (ISSN-L)
- OpenAlex
- W2104127817
- Cited by
- 289
- References
- 8
- FWCI
- 11.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The relationship between the design, position, and articular wear of acetabular components inserted without cement and the development of pelvic osteolysis. https://app.cochat.ai/papers/10.2106/00004623-199405000-00008
- The paper
- Schmalzried, T. P., Guttmann, D., Grecula, M., & Amstutz, H. C. (1994). The relationship between the design, position, and articular wear of acetabular components inserted without cement and the development of pelvic osteolysis. The Journal of Bone & Joint Surgery. https://doi.org/10.2106/00004623-199405000-00008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.