The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Tissue Engineering of Bone: Material and Matrix Considerations
Abstract
When the normal physiologic reaction to fracture does not occur, such as in fracture nonunions or large-scale traumatic bone injury, surgical intervention is warranted. Autografts and allografts represent current strategies for surgical intervention and subsequent bone repair, but each possesses limitations, such as donor-site morbidity with the use of autograft and the risk of disease transmission with the use of allograft. Synthetic bone-graft substitutes, developed in an effort to overcome the inherent limitations of autograft and allograft, represent an alternative strategy. These synthetic graft substitutes, or matrices, are formed from a variety of materials, including natural and synthetic polymers, ceramics, and composites, that are designed to mimic the three-dimensional characteristics of autograft tissue while maintaining viable cell populations. Matrices also act as delivery vehicles for factors, antibiotics, and chemotherapeutic agents, depending on the nature of the injury to be repaired. This intersection of matrices, cells, and therapeutic molecules has collectively been termed tissue engineering. Depending on the specific application of the matrix, certain materials may be more or less well suited to the final structure; these include polymers, ceramics, and composites of the two. Each category is represented by matrices that can form either solid preformed structures or injectable forms that harden in situ. This article discusses the myriad design considerations that are relevant to successful bone repair with tissue-engineered matrices and provides an overview of several manufacturing techniques that allow for the actualization of critical design parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Characterization of cells with osteogenic potential from human marrow
Haynesworth, S. E., Goshima, J., Goldberg, V. M., & Caplan, A. I. (1992) · Bone · doi:10.1016/8756-3282(92)90364-3 · Cited by 1,289
Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function
Ducheyne, P., & Qiu, Q. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00181-7 · Cited by 1,133
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Kikuchi, M., Itoh, S., Ichinose, S., Shinomiya, K., & Tanaka, J. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00305-7 · Cited by 854
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Tissue Engineering: Orthopedic Applications
Laurencin, C. T., Ambrosio, A. M. A., Borden, M. D., & Cooper, J. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.19 · Cited by 752
Self-citationOh, S. H., Park, I. K., Kim, J. M., & Lee, J. H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.024 · Cited by 713
Stem cell technology and bioceramics: From cell to gene engineering
Ohgushi, H., & Caplan, A. I. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(1999)48:6<913::aid-jbm22>3.0.co;2-0 · Cited by 566
Polymers as Biomaterials for Tissue Engineering and Controlled Drug Delivery
Nair, L. S., & Laurencin, C. T. (2006) · Advances in Biochemical Engineering/Biotechnology · doi:10.1007/b137240 · Cited by 533
Self-citationOsteoinduction in porous hydroxyapatite implanted in heterotopic sites of different animal models
Ripamonti, U. (1996) · Biomaterials · doi:10.1016/0142-9612(96)80752-6 · Cited by 499
Calcium Phosphate Cement: Review of Mechanical and Biological Properties
Ambard, A. J., & Mueninghoff, L. (2006) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2006.00129.x · Cited by 407
Wiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Kelly, C. M., Wilkins, R. M., Gitelis, S., Hartjen, C., Watson, J. T., & Kim, P. T. (2001) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200101000-00008 · Cited by 353
Chen, F., Wang, Z.-C., & Lin, C.-J. (2002) · Materials Letters · doi:10.1016/s0167-577x(02)00885-6 · Cited by 305
Fundamentals of Biomechanics in Tissue Engineering of Bone
Athanasiou, K. A., Zhu, C.-F., Lanctot, D. R., Agrawal, C. M., & Wang, X. (2000) · Tissue Engineering · doi:10.1089/107632700418083 · Cited by 301
Jiang, T., Abdel-Fattah, W. I., & Laurencin, C. T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.025 · Cited by 283
Self-citationTissue engineered microsphere-based matrices for bone repair:
Borden, M., Attawia, M., Khan, Y., & Laurencin, C. T. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00137-5 · Cited by 270
Self-citationBONE CELLS AND MATRICES IN ORTHOPEDIC TISSUE ENGINEERING
Fleming, J. E., Cornell, C. N., & Muschler, G. F. (2000) · Orthopedic Clinics of North America · doi:10.1016/s0030-5898(05)70156-5 · Cited by 250
The Use of Osteoconductive Bone Graft Substitutes in Orthopaedic Trauma
Hak, D. J. (2007) · Journal of the American Academy of Orthopaedic Surgeons · doi:10.5435/00124635-200709000-00003 · Cited by 244
CHAPMAN, M. W., BUCHOLZ, R., & CORNELL, C. (1997) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199704000-00004 · Cited by 228
Borden, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00374-5 · Cited by 227
CALCIUM SULFATE– AND CALCIUM PHOSPHATE–BASED BONE SUBSTITUTES
Tay, B. K. B., Patel, V. V., & Bradford, D. S. (1999) · Orthopedic Clinics of North America · doi:10.1016/s0030-5898(05)70114-0 · Cited by 221
In vivo evaluation of a bioactive scaffold for bone tissue engineering
Livingston, T., Ducheyne, P., & Garino, J. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10157 · Cited by 216
Bonding strength of bonelike apatite layer to Ti metal substrate
Kim, H.-M., Miyaji, F., Kokubo, T., & Nakamura, T. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199722)38:2<121::aid-jbm6>3.0.co;2-s · Cited by 187
Laurencin, C. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00279-9 · Cited by 186
Self-citationNair, L. S., Bhattacharyya, S., Bender, J. D., Greish, Y. E., Brown, P. W., Allcock, H. R., & Laurencin, C. T. (2004) · Biomacromolecules · doi:10.1021/bm049759j · Cited by 169
Self-citationTissue engineered bone-regeneration using degradable polymers: The formation of mineralized matrices
Laurencin, C. T., Attawia, M. A., Elgendy, H. E., & Herbert, K. M. (1996) · Bone · doi:10.1016/s8756-3282(96)00132-9 · Cited by 168
Self-citationThe influence of high sintering temperatures on the mechanical properties of hydroxylapatite
Van Landuyt, P., Li, F., Keustermans, J. P., Streydio, J. M., Delannay, F., & Munting, E. (1995) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00121239 · Cited by 161
El‐Amin, S. F., Lu, H., Khan, Y., Burems, J., Mitchell, J., Tuan, R. S., & Laurencin, C. T. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00451-9 · Cited by 156
Self-citationThe sintered microsphere matrix for bone tissue engineering: In vitro osteoconductivity studies
Borden, M. D., Attawia, M., & Laurencin, C. T. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10201 · Cited by 156
Self-citationTransplantation of cultured bone cells using combinations of scaffolds and culture techniques
Uemura, T., Dong, J., Wang, Y., Kojima, H., Saito, T., Iejima, D., Kikuchi, M., Tanaka, J., & Tateishi, T. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00039-5 · Cited by 151
Singh, A., Krogman, N. R., Sethuraman, S., Nair, L. S., Sturgeon, J., Brown, P. W., Laurencin, C. T., & Allcock, H. R. (2006) · Biomacromolecules · doi:10.1021/bm050752r · Cited by 150
Self-citationLee, K., Wang, S., Lu, L., Jabbari, E., Currier, B. L., & Yaszemski, M. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2801 · Cited by 140
Self-citationHolland, T. A., & Mikos, A. G. (2006) · Springer eBooks · doi:10.1007/b137205 · Cited by 121
Self-citationSurface and bulk modifications to photocrosslinked polyanhydrides to control degradation behavior
Burkoth, A. K., Burdick, J. A., & Anseth, K. S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20000905)51:3<352::aid-jbm8>3.0.co;2-c · Cited by 121
Tissue-engineered bone formation in vivo using a novel sintered polymeric microsphere matrix
Borden, M. D., Attawia, M., Khan, Y., El‐Amin, S. F., & Laurencin, C. T. (2004) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.86b8.14267 · Cited by 116
Self-citationLiu, H. H., Slamovich, E. B., & Webster, T. J. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30734 · Cited by 115
Porous polymer/bioactive glass composites for soft‐to‐hard tissue interfaces
Zhang, K., Ma, Y., & Francis, L. F. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10227 · Cited by 104
Sarkar, M. R., Wachter, N. J., Patka, P., & Kinzl, L. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(2001)58:3<329::aid-jbm1025>3.0.co;2-9 · Cited by 102
Cell-based tissue engineering therapies: the influence of whole body physiology.
Haynesworth, S. E., Reuben, D. Y., & Caplan, A. I. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(98)00016-7 · Cited by 84
The Use of Calcium Sulfate in the Treatment of Benign Bone Lesions: A Preliminary Report
Mirzayan, R., Panossian, V. S., Avedian, R. S., Forrester, D. M., & Menendez, L. R. (2001) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-200103000-00006 · Cited by 81
Sethuraman, S., Nair, L. S., El‐Amin, S. F., Farrar, R. A., Nguyen, M. N., Singh, A., Allcock, H. R., Greish, Y. E., Brown, P. W., & Laurencin, C. T. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30620 · Cited by 79
Self-citationEl‐Amin, S. F., Attawia, M., Lu, H. H., Shah, A. K., Chang, R. C.-A., Hickok, N. J., Tuan, R. S., & Laurencin, C. T. (2002) · Journal of Orthopaedic Research® · doi:10.1016/s0736-0266(01)00062-6 · Cited by 72
Self-citationHo, E., Lowman, A. M., & Marcolongo, M. S. (2006) · Biomacromolecules · doi:10.1021/bm0602536 · Cited by 66
Miscibility of Bioerodible Polyphosphazene/Poly(lactide-co-glycolide) Blends
Krogman, N. R., Singh, A., Nair, L. S., Laurencin, C. T., & Allcock, H. R. (2007) · Biomacromolecules · doi:10.1021/bm061064q · Cited by 57
Self-citationQuantitative analysis of three‐dimensional fluid flow in rotating bioreactors for tissue engineering
Botchwey, E. A., Pollack, S. R., Levine, E. M., Johnston, E. D., & Laurencin, C. T. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10163 · Cited by 54
Self-citationNair, L. S., Lee, D. A., Bender, J. D., Barrett, E. W., Greish, Y. E., Brown, P. W., Allcock, H. R., & Laurencin, C. T. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30532 · Cited by 52
Self-citationDean, D., Wolfe, M. S., Ahmad, Y., Totonchi, A. S., Chen, J. E.-K., Fisher, J. P., Cooke, M. N., Rimnac, C. M., Lennon, D. P., Caplan, A. I., et al. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.923 · Cited by 36
Self-citationEffect of PMMA cement radical polymerisation on the inflammatory response
Santin, M., Motta, A., Borzacchiello, A., Nicolais, L., & Ambrosio, L. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-004-5668-x · Cited by 33
Bilayered calcium phosphate coating to promote osseointegration of a femoral stem prosthesis
Goyenvalle, E., Guyen, N. J. M., Aguado, E., Passuti, N., & Daculsi, G. (2003) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1022876522242 · Cited by 16
(1997) · doi:10.1002/(sici)1097-4644(199702)64:2<295::aid-jcb12>3.0.co;2-i
Cited by
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Chitosan-based scaffolds for bone tissue engineering
Levengood, S. K. L., & Zhang, M. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00027g · Cited by 672
Yao, Q., Cosme, J. G. L., Xu, T., Miszuk, J. M., Picciani, P. H. S., Fong, H., & Sun, H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.018 · Cited by 543
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Self-citation
Metadata
- Authors
- Khan, Y., Yaszemski, M. J., Mikos, A. G., & Laurencin, C. T.
- Venue
- Journal of Bone and Joint Surgery
- Published
- 2008-02
- Volume
- 90
- Issue
- Supplement_1
- Pages
- 36-42
- ISSN
- 0021-9355 (ISSN-L)
- 1535-1386
- OpenAlex
- W1985862595
- Cited by
- 481
- References
- 52
- FWCI
- 25.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.