Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case
Open accessThe DOI matches its Crossref record; 14 of the 16 references it cites were found in a registry or an index; 2 of the 19 sources its claims cite were checked for support.
Abstract
The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using the same methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The “as received” feedstock to the pyrolysis plant will be “reactor ready.” This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.
Overview
CoChat Summary
## TL;DR
This design case evaluates a biomass-to-hydrocarbon fuel pathway using fast pyrolysis, hydrotreating, hydrocracking, and hydrogen production, targeting infrastructure-compatible gasoline and diesel. The stand-alone plant is estimated at $303 million (2007 basis) with an MFSP of $2.04/gal, while refinery co-location lowers capital to $188 million and MFSP to $1.74/gal.
## Key findings
- A stand-alone “n th” plant using 2,000 dry metric tons/day of hybrid poplar wood chips is designed to produce 76 million gallons/year of gasoline and diesel.
- The paper reports a capital cost of $303 million (2007 basis) for the stand-alone plant and a minimum fuels selling price of $2.04/gal ($1.34/gal ethanol equivalent basis) at 10% ROI.
- For a refinery-integrated configuration, capital investment falls to $188 million and MFSP to $1.74/gal ($1.14/gal ethanol equivalent basis).
- The process yields reported in the base case are 100 gal/st dry wood unadjusted for natural gas use, 65 gal/st dry wood on a 100% renewable feedstock basis, and ~100 gal/st dry wood on an LHV ethanol-equivalent basis; the carbon balance shows 55% of carbon ends in fuel products.
## Methods
- Conceptual process design and technoeconomic analysis using literature-based process flow diagrams, modeled in CHEMCAD, with capital costing from literature and Aspen Icarus, assembled in Excel, and evaluated by discounted cash flow.
- Basis: hybrid poplar wood chips delivered at 50 wt% moisture, with a 2,000 mtpd bone-dry feed rate and an assumed established (“nth”) plant.
- Main process analyzed: feed drying and size reduction, circulating fluidized bed fast pyrolysis at 520°C, two-stage hydrotreating to stable oil, hydrocracking of the heavy fraction, distillation to gasoline/diesel blendstocks, and steam reforming for hydrogen.
## Limitations
- The paper states that other pyrolytic processes and upgrading steps were not evaluated, and gasification pathways were also not addressed.
- It also states the technology is a goal case projected to be available between now and 2015, and that fast pyrolysis upgrading to transportation fuels had only been demonstrated at laboratory and small engineering development scale.
- Evident from the text: the analysis relies heavily on literature and vendor estimates and uses stoichiometric models for upgrading, so the results are design-case estimates rather than demonstration data.
Model-written summary of a shortened version of the paper’s full text (it is longer than we read). Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 5 Not valid · 11 Not checked · 43 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Reducing the project contingency to three percent of the total capital project, (similar to that used in Phillips et al. 2007), reduces the selling price by about $0.22/gal.”
What the sources say
- Partly supportedcites Phillips et al. 2007 matched to “Thermochemical Ethanol via Indirect Gasification and Mixed Alcohol Synthesis of Lignocellulosic Biomass” (2007) sourceExperimental — accuracy not yet measured
Table 15 (Section 4.1, Capital Costs; page not provided) uses a 3% project contingency, but calculates it as a percentage of total installed cost. The same table gives contingency as 2% of total project investment, so it does not support the cited comparison if “total capital project” means total project investment. The $0.22/gal reduction is the citing authors’ own calculation, not a result attributed to this source. (LLM, conf=0.86)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The equipment spare sensitivity determines the product cost increase if both the pyrolysis unit and upgrading units had 3 reactors at 50% capacity each. This increases the selling price by about $0.21/gal.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Gasoline, lb/100 lb feed 95 Depends on feed/conditions(a,b) Diesel, lb/100 lb feed 5 Depends on feed/conditions(a,b)”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“MFSP, $/gal 2.04”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“LHV ethanol equivalent Fuel Product, gal/st dry wood, 100% renewable basis ~100”
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
30 more claims
Create a free account to see all 61 claims and every source verdict.
- Probably not a substantial claim. 11
- It may state two separate claims as one. 17
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“Table 5.3. Hydrotreating Conditions 1st Stage(a) 2nd Stage(a) Temperature, °F (°C) 465 (240) 700 (370) Pressure, psig 2500 2015”
“Stream No. 200 202 203 205 207 208 212 213 215 220 221 Temp F 110.6798 174.8342 430 465.5045 470 700 484.8971 481.4931 319.3935 150 110 Pres psig 1 2500 2495 2495 2490 2475 2475 2470 710.3041 705.3041 700.3041”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“1 Fired Heater 8.35 40.00 mmbtuh 8.18 $378,000 2004 0.65 2.47 933,660 3,057,432 $1,237,827 2”
Reported 8.18 · recomputed 4.790419
Citations
Cites
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Plant design and economics for chemical engineers
Peters, M. S., & Timmerhaus, K. D. (1958) · Cited by 4,067
Historical Developments in Hydroprocessing Bio-oils
Elliott, D. C. (2007) · Energy & Fuels · doi:10.1021/ef070044u · Cited by 1,370
Self-citationAden, A., Ruth, M., Ibsen, K., Jechura, J., Neeves, K., Sheehan, J., Wallace, B., Montague, L., Slayton, A., & Lukas, J. (2002) · doi:10.2172/15001119 · Cited by 1,197
Handbook of Petroleum Refining Processes
Meyers, R. A. (2003) · Cited by 969
Chemical Process Equipment : Selection and Design
Walas, S. M. (1988) · Medical Entomology and Zoology · Cited by 889
Bridgwater, A. V., Toft, A. J., & Brammer, J. G. (2002) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(01)00010-7 · Cited by 617
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Large-Scale Pyrolysis Oil Production: A Technology Assessment and Economic Analysis
Ringer, M., Putsche, V., & Scahill, J. (2006) · doi:10.2172/894989 · Cited by 370
Cited by
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
A review of catalytic upgrading of bio-oil to engine fuels
Mortensen, P. M., Grunwaldt, J.-D., Jensen, P. A., Knudsen, K. G., & Jensen, A. D. (2011) · Applied Catalysis A: General · doi:10.1016/j.apcata.2011.08.046 · Cited by 1,768
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Techno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814
Biomass-to-bioenergy and biofuel supply chain optimization: Overview, key issues and challenges
Yue, D., You, F., & Snyder, S. W. (2014) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2013.11.016 · Cited by 720
Uzoejinwa, B. B., He, X., Wang, S., El-Fatah Abomohra, A., Hu, Y., & Wang, Q. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.004 · Cited by 637
Bio-jet fuel conversion technologies
Wang, W.-C., & Tao, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.016 · Cited by 564
A review and perspective of recent bio-oil hydrotreating research
Zacher, A. H., Olarte, M. V., Santosa, D. M., Elliott, D. C., & Jones, S. B. (2014) · Green Chem. · doi:10.1039/c3gc41382a · Cited by 528
Self-citationHoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
“The fast pyrolysis of biomass is at an early stage of commercialisation [49] with companies like Ensyn Technologies, Dynamotive, KIT and BTG leading developments [15, 50].”
BackgroundCatalytic Fast Pyrolysis: A Review
Dickerson, T., & Soria, J. (2013) · Energies · doi:10.3390/en6010514 · Cited by 461
Renewable bio-jet fuel production for aviation: a review
Wei, H., Liu, W., Chen, X., Yang, Q., Li, J., & Chen, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.06.007 · Cited by 435
Prospects for pyrolysis technologies in the bioenergy sector: A review
Roy, P., & Dias, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.136 · Cited by 405
Zhu, Y., Biddy, M. J., Jones, S. B., Elliott, D. C., & Schmidt, A. J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.053 · Cited by 389
Self-citationChallenges and Opportunities for Bio-oil Refining: A Review
Pinheiro Pires, A. P., Arauzo, J., Fonts, I., Domine, M. E., Fernández Arroyo, A., Garcia-Perez, M. E., Montoya, J., Chejne, F., Pfromm, P., & Garcia-Perez, M. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00039 · Cited by 385
Understanding biomass feedstock variability
Kenney, K. L., Smith, W. A., Gresham, G. L., & Westover, T. L. (2013) · Biofuels · doi:10.4155/bfs.12.83 · Cited by 368
Production of advanced biofuels: Co-processing of upgraded pyrolysis oil in standard refinery units
de Miguel Mercader, F., Groeneveld, M. J., Kersten, S. R. A., Way, N. W. J., Schaverien, C. J., & Hogendoorn, J. A. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.01.033 · Cited by 341
Estimating profitability of two biochar production scenarios: slow pyrolysis vs fast pyrolysis
Brown, T. R., Wright, M. M., & Brown, R. C. (2011) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.254 · Cited by 340
Lignin Pyrolysis Components and Upgrading—Technology Review
Mu, W., Ben, H., Ragauskas, A., & Deng, Y. (2013) · BioEnergy Research · doi:10.1007/s12155-013-9314-7 · Cited by 333
Kargbo, H., Harris, J. S., & Phan, A. N. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110168 · Cited by 333
Dabros, T. M. H., Stummann, M. Z., Høj, M., Jensen, P. A., Grunwaldt, J.-D., Gabrielsen, J., Mortensen, P. M., & Jensen, A. D. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.002 · Cited by 309
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
Self-citationde Jong, S., Hoefnagels, R., Faaij, A., Slade, R., Mawhood, R., & Junginger, M. (2015) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1613 · Cited by 294
“Jones et al. 55 calculated a decrease of 15% in MFSP for co-locating a pyrolysis plant with a refi nery, thereby leveraging existing hydrogen production and hydrocracking capacity and exchanging off -gases.”
Comprehensive review on production and utilization of biochar
Panwar, N. L., Pawar, A., & Salvi, B. L. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-0172-6 · Cited by 281
Patel, M., & Kumar, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.146 · Cited by 284
“Another techno-economic assessment was done by a team from the Pacific Northwest National Laboratory for the production of diesel and gasoline from hybrid poplar via fast pyrolysis, hydrotreating, and hydrocracking [131].”
MethodPyrolysis liquids and gases as alternative fuels in internal combustion engines – A review
Hossain, A. K., & Davies, P. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.031 · Cited by 280
A perspective on oxygenated species in the refinery integration of pyrolysis oil
Talmadge, M. S., Baldwin, R. M., Biddy, M. J., McCormick, R. L., Beckham, G. T., Ferguson, G. A., Czernik, S., Magrini-Bair, K. A., Foust, T. D., Metelski, P. D., et al. (2014) · Green Chem. · doi:10.1039/c3gc41951g · Cited by 272
Self-citationPerkins, G., Bhaskar, T., & Konarova, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.048 · Cited by 267
Macroalgae as a Biomass Feedstock: A Preliminary Analysis
Roesijadi, G., Jones, S. B., Snowden-Swan, L. J., & Zhu, Y. (2010) · doi:10.2172/1006310 · Cited by 268
“Jones, S. B. and Y. Zhu (2009b).”
MethodInfluentialSelf-citationHasan, M. M., Rasul, M. G., Khan, M. M. K., Ashwath, N., & Jahirul, M. I. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111073 · Cited by 255
Galadima, A., & Muraza, O. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.078 · Cited by 246
Brown, T. R., Thilakaratne, R., Brown, R. C., & Hu, G. (2013) · Fuel · doi:10.1016/j.fuel.2012.11.029 · Cited by 214
Pyrolysis: A Sustainable Way to Generate Energy from Waste
Zaman, C. Z., Pal, K., Yehye, W. A., Sagadevan, S., Shah, S. T., Adebisi, G. A., Marliana, E., Rafique, R. F., & Johan, R. B. (2017) · Pyrolysis · doi:10.5772/intechopen.69036 · Cited by 216
“Two types of this reactor, that is, ablative vortex and ablative rotating disk are used commonly [82].”
BackgroundLife cycle assessment of transportation fuels from biomass pyrolysis
Iribarren, D., Peters, J. F., & Dufour, J. (2012) · Fuel · doi:10.1016/j.fuel.2012.02.053 · Cited by 210
Separation, hydrolysis and fermentation of pyrolytic sugars to produce ethanol and lipids
Lian, J., Chen, S., Zhou, S., Wang, Z., O’Fallon, J., Li, C.-Z., & Garcia-Perez, M. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.07.071 · Cited by 209
“At least 38% of the mass of these oils can be further transformed into green gasoline and diesel via hydrotreatment in advanced bio-refineries (Holmgren et al., 2008; Jones et al., 2009; Radlein, 2009).”
BackgroundShemfe, M. B., Gu, S., & Ranganathan, P. (2015) · Fuel · doi:10.1016/j.fuel.2014.11.078 · Cited by 203
“Few researchers have conducted techno-economic analysis of the fast pyrolysis process and bio-oil hydroprocessing for transport fuel production [17,18] via a process simulation platform.”
BackgroundAtsonios, K., Kougioumtzis, M.-A., D. Panopoulos, K., & Kakaras, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.056 · Cited by 198
“Another, more direct, approach is the pyrolysis and upgrading of the pyrolytic oil (bio-oil) [34–36]”
MethodBiomass to fuels: The role of zeolite and mesoporous materials
Perego, C., & Bosetti, A. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.11.034 · Cited by 188
Zang, G., Sun, P., Elgowainy, A. A., Bafana, A., & Wang, M. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101459 · Cited by 183
Towards the effective plastic waste management in Bangladesh: a review
Mourshed, M., Masud, M. H., Rashid, F., & Joardder, M. U. H. (2017) · Environmental Science and Pollution Research · doi:10.1007/s11356-017-0429-9 · Cited by 182
Zhu, Y., Albrecht, K. O., Elliott, D. C., Hallen, R. T., & Jones, S. B. (2013) · Algal Research · doi:10.1016/j.algal.2013.07.003 · Cited by 181
Self-citationLife cycle assessment of gasoline and diesel produced via fast pyrolysis and hydroprocessing
Hsu, D. D. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.05.019 · Cited by 179
“Total fuel yield after hydroprocessing L/dry tonne wood (gal/dry short ton) 417 (100) [10] 310 (75) [24] 417 (100) [10]”
BackgroundMethodInfluentialOu, L., Thilakaratne, R., Brown, R. C., & Wright, M. M. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2014.11.018 · Cited by 175
Jones, S. B., Meyer, P. A., Snowden-Swan, L. J., Padmaperuma, A. B., Tan, E., Dutta, A., Jacobson, J., & Cafferty, K. (2013) · doi:10.2172/1115839 · Cited by 176
Self-citationPyrolysis Oil Multiphase Behavior and Phase Stability: A Review
Oasmaa, A., Fonts, I., Pelaez-Samaniego, M. R., Garcia-Perez, M. E., & Garcia-Perez, M. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b01287 · Cited by 167
A techno-economic review of thermochemical cellulosic biofuel pathways
Brown, T. R. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.09.053 · Cited by 164
Feng, Q., & Lin, Y. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.022 · Cited by 163
Large-scale biohydrogen production from bio-oil
Sarkar, S., & Kumar, A. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.04.038 · Cited by 168
Gebreslassie, B. H., Slivinsky, M., Wang, B., & You, F. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.10.013 · Cited by 157
Review of Biojet Fuel Conversion Technologies
Wang, W.-C., Tao, L., Markham, J., Zhang, Y., Tan, E., Batan, L., Warner, E., & Biddy, M. (2016) · doi:10.2172/1278318 · Cited by 148
A kinetic reaction model for biomass pyrolysis processes in Aspen Plus
Peters, J. F., Banks, S. W., Bridgwater, A. V., & Dufour, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.030 · Cited by 145
“[7] Jones SB, Valkenburg C, Walton CW, Elliott DC, Holladay JE, Stevens DJ, et al.”
BackgroundTechno-economic analysis for upgrading the biomass-derived ethanol-to-jet blendstocks
Tao, L., Markham, J. N., Haq, Z., & Biddy, M. J. (2017) · Green Chemistry · doi:10.1039/c6gc02800d · Cited by 144
“After oligomerization, a hydrotreating step is used to saturate the remaining double bonds, using either a cobalt molybdenum (CoMo) hydrotreating catalyst, 91,93 or palladium or platinum (Pd or Pt) on an activated carbon catalyst.”
Techno-economic and Monte Carlo Probabilistic Analysis of Microalgae Biofuel Production System
Batan, L. Y., Graff, G. D., & Bradley, T. H. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.07.085 · Cited by 140
Life cycle analysis of fuel production from fast pyrolysis of biomass
Han, J., Elgowainy, A., Dunn, J. B., & Wang, M. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.01.141 · Cited by 147
Jones, S., Meyer, P., Snowden-Swan, L., Padmaperuma, A., Tan, E., Dutta, A., Jacobson, J., & Cafferty, K. (2013) · doi:10.2172/1126275 · Cited by 138
Self-citationSimulation and life cycle assessment of biofuel production via fast pyrolysis and hydroupgrading
Peters, J. F., Iribarren, D., & Dufour, J. (2014) · Fuel · doi:10.1016/j.fuel.2014.09.014 · Cited by 153
Economic tradeoff between biochar and bio-oil production via pyrolysis
Yoder, J., Galinato, S. P., Granatstein, D. M., & Garcı̀a-Pèrez, M. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.026 · Cited by 135
“[7] Jones SB, Valkenburg C, Walton C, Elliott DC, Holladay JE, Stevens DJ, et al.”
BackgroundLi, W., Dang, Q. F., Brown, R. C., Laird, D. A., & Wright, M. M. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.049 · Cited by 147
Recent advances on fast hydropyrolysis of biomass
Resende, F. L. P. (2016) · Catalysis Today · doi:10.1016/j.cattod.2016.01.004 · Cited by 143
Sen, S. M., Henao, C. A., Braden, D. J., Dumesic, J. A., & Maravelias, C. T. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.07.022 · Cited by 136
Techno-economic analysis of two bio-oil upgrading pathways
Zhang, Y., Brown, T. R., Hu, G., & Brown, R. C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.01.030 · Cited by 122
A review on ex situ catalytic fast pyrolysis of biomass
Wan, S., & Wang, Y. (2014) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-014-1436-8 · Cited by 129
Value-Added Chemicals from Microalgae: Greener, More Economical, or Both?
Gong, J., & You, F. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500683w · Cited by 117
Catalytic conversion of waste biomass by hydrothermal treatment
Hammerschmidt, A., Boukis, Ν., Hauer, E., Galla, U., Dinjus, E., Hitzmann, B., Larsen, T., & Nygaard, S. (2010) · Fuel · doi:10.1016/j.fuel.2010.10.007 · Cited by 112
McCormick, R. L., Ratcliff, M. A., Christensen, E., Fouts, L., Luecke, J. H., Chupka, G. M., Yanowitz, J., Tian, M., & Boot, M. D. (2015) · Energy & Fuels · doi:10.1021/ef502893g · Cited by 119
Techno-economic analysis of monosaccharide production via fast pyrolysis of lignocellulose
Zhang, Y., Brown, T. R., Hu, G., & Brown, R. C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.09.070 · Cited by 113
“Past TEAs have found the 20-year IRR of fast pyrolysis facilities to be very sensitive to the market values and yields of the pyrolytic products (Brown and Hu, 2011; Brown et al., 2011; Brown et al., 2012; Jones et al., 2009; Sarkar and Kumar, 2010; Wright et al., 2010).”
BackgroundSantos, C. I., Silva, C. C., Mussatto, S. I., Osseweijer, P., van der Wielen, L. A. M., & Posada, J. A. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.05.011 · Cited by 113
Techno‐economic analysis of biobased chemicals production via integrated catalytic processing
Brown, T. R., Zhang, Y., Hu, G., & Brown, R. C. (2012) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.344 · Cited by 107
On the Systematic Synthesis of Sustainable Biorefineries
Martín, M., & Grossmann, I. E. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2030213 · Cited by 124
Sharifzadeh, M., Cortada-García, M., & Shah, N. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.07.026 · Cited by 114
Mahmood, R., Parshetti, G. K., & Balasubramanian, R. (2016) · Energy · doi:10.1016/j.energy.2016.02.042 · Cited by 115
Biochar and its twin benefits: Crop residue management and climate change mitigation in India
Anand, A., Kumar, V., & Kaushal, P. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111959 · Cited by 118
Biomass upgrading through acid–base catalysis
Perego, C., & Bianchi, D. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.01.036 · Cited by 107
Consumptive water use in the production of ethanonl and petroleum gasoline.
Wu, M., Mintz, M., Wang, M., & Arora, S. (2009) · doi:10.2172/947085 · Cited by 99
“31 fast pyrolysis of forest wood residue consumes 2.3 gallon of water to produce 1 gallon of biofuel (containing 50% bio-based diesel and 50% bio-gasoline) (Jones et al. 2009).”
MethodInfluentialThilakaratne, R., Brown, T., Li, Y., Hu, G., & Brown, R. (2014) · Green Chem. · doi:10.1039/c3gc41314d · Cited by 97
Waste and residue availability for advanced biofuel production in EU Member States
Searle, S. Y., & Malins, C. J. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.01.008 · Cited by 97
Hossain, A. K., Ouadi, M., Siddiqui, S., Yang, Y., Brammer, J. G., Hornung, A., Kay, M., & Davies, P. A. (2012) · Fuel · doi:10.1016/j.fuel.2012.05.007 · Cited by 97
“All these products have potential as fuels; in particular liquid fuels may power internal combustion engines [6, 7].”
BackgroundA life cycle assessment of advanced biofuel production from a hectare of corn
Kauffman, N., Hayes, D. J., & Brown, R. C. (2011) · Fuel · doi:10.1016/j.fuel.2011.06.031 · Cited by 106
Hydrodeoxygenation of Pyrolysis Oils
Routray, K., Barnett, K. J., & Huber, G. W. (2016) · Energy Technology · doi:10.1002/ente.201600084 · Cited by 98
Resasco, D. E., & Crossley, S. P. (2014) · Catalysis Today · doi:10.1016/j.cattod.2014.06.037 · Cited by 107
Han, D., Yang, X., Li, R., & Wu, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.094 · Cited by 103
Biofuels and biochemicals production from forest biomass in Western Canada
Sarkar, S., Kumar, A., & Sultana, A. (2011) · Energy · doi:10.1016/j.energy.2011.07.024 · Cited by 106
Exergetic analysis of a fast pyrolysis process for bio-oil production
Peters, J. F., Petrakopoulou, F., & Dufour, J. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.11.007 · Cited by 92
Perkins, G. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.090 · Cited by 99
Ungureanu, N., VLĂDUT, N.-V., BIRIȘ, S. Ș., Gheorghiță, N. E., & IONESCU, M. (2025) · Sustainability · doi:10.3390/su17177806 · Cited by 133
Garcia, D. J., & You, F. (2014) · AIChE Journal · doi:10.1002/aic.14666 · Cited by 101
Morgan, T. J., Youkhana, A. H., Turn, S. Q., Ogoshi, R. M., & Garcìa-Pèrez, M. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03001 · Cited by 89
Stochastic techno-economic evaluation of cellulosic biofuel pathways
Zhao, X., Brown, T. R., & Tyner, W. E. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.09.056 · Cited by 84
Handler, R. M., Shonnard, D. R., Kalnes, T. N., & Lupton, F. S. (2014) · Algal Research · doi:10.1016/j.algal.2013.12.001 · Cited by 93
Kalinke, C., Mangrich, A. S., Junior, L. H. M., & Bergamini, M. F. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.07.041 · Cited by 82
Fast hydropyrolysis of biomass Conversion: A comparative review
Oh, S., Lee, J., Lam, S. S., Kwon, E. E., Ha, J., Tsang, D. C. W., Ok, Y. S., Chen, W., & Park, Y.-K. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.126067 · Cited by 84
Estimation of Liquid Fuel Yields from Biomass
Singh, N. R., Delgass, W. N., Ribeiro, F. H., & Agrawal, R. (2010) · Environmental Science & Technology · doi:10.1021/es100316z · Cited by 83
Kung, C.-C., & Mu, J. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109343 · Cited by 75
Neves, R. C., Klein, B. C., da Silva, R. J., Rezende, M. C. A. F., Funke, A., Olivarez-Gómez, E., Bonomi, A., & Maciel-Filho, R. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109607 · Cited by 86
Braimakis, K., Atsonios, K., Panopoulos, K. D., Karellas, S., & Kakaras, E. C. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.052 · Cited by 87
“5 mm size [6,37,78], as well as further drying to levels of moisture lower than 10% ( and of about 7%) w/w are necessary [6,28,37,76] in order to achieve the high heating rates required for the maximization of the bio-oil yield during the reaction.”
BackgroundMild hydrotreating of biomass pyrolysis oils to produce a suitable refinery feedstock
French, R. J., Hrdlicka, J., & BALDWIN, R. M. (2010) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.10419 · Cited by 76
A life cycle assessment of options for producing synthetic fuel via pyrolysis
Vienescu, D. N., Wang, J., Le Gresley, A., & Nixon, J. D. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2017.10.069 · Cited by 74
“The overall yield of deoxygenated bio-oil for two-stage 310 14 hydrotreating is expected to range from 30–44% (Jones et al., 2009; Zheng, Chang and Fu, 311 2015).”
BackgroundElgowainy, A., Han, J., Ward, J. W., Joseck, F., Gohlke, D., Lindauer, A., Ramsden, T., Biddy, M. J., Alexander, M., Barnhart, S., et al. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1254857 · Cited by 124
An Overview of the Properties and Applications of Biomass Pyrolysis Oils
Balat, M. (2011) · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · doi:10.1080/15567030903228914 · Cited by 72
Metadata
- Authors
- Jones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S.
- Published
- 2009-02-28
- OpenAlex
- W1576941281
- Cited by
- 320
- References
- 16
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 5 · 2023: 9 · 2022: 7 · 2021: 15 · 2020: 14 · 2019: 17 · 2018: 26 · 2017: 27 · 2016: 33 · 2015: 28 · 2014: 40 · 2013: 37 · 2012: 22
- Type
- report
- Language
- en
- Open access
- gold
- doi.org
- Locations
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- University of North Texas Digital Library (University of North Texas) (submittedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Chemical Engineering › Catalysis › Catalysis and Hydrodesulfurization Studies
- Keywords
- biomass-to-liquids, fast pyrolysis, hydrotreating, hydrocracking, bio-oil upgrading, renewable gasoline, renewable diesel, hybrid poplar, hydrogen production, production cost analysis, capital investment, process design, distillation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-06, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-06 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.