Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case
Open accessThe DOI matches its Crossref record; 14 of the 16 references it cites were found in a registry or an index; 2 of the 19 sources its claims cite were checked for support.
Abstract
The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using the same methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The “as received” feedstock to the pyrolysis plant will be “reactor ready.” This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.
Overview
CoChat Summary
## TL;DR
This design case evaluates a biomass-to-hydrocarbon fuel pathway using fast pyrolysis, hydrotreating, hydrocracking, and hydrogen production, targeting infrastructure-compatible gasoline and diesel. The stand-alone plant is estimated at $303 million (2007 basis) with an MFSP of $2.04/gal, while refinery co-location lowers capital to $188 million and MFSP to $1.74/gal.
## Key findings
- A stand-alone “n th” plant using 2,000 dry metric tons/day of hybrid poplar wood chips is designed to produce 76 million gallons/year of gasoline and diesel.
- The paper reports a capital cost of $303 million (2007 basis) for the stand-alone plant and a minimum fuels selling price of $2.04/gal ($1.34/gal ethanol equivalent basis) at 10% ROI.
- For a refinery-integrated configuration, capital investment falls to $188 million and MFSP to $1.74/gal ($1.14/gal ethanol equivalent basis).
- The process yields reported in the base case are 100 gal/st dry wood unadjusted for natural gas use, 65 gal/st dry wood on a 100% renewable feedstock basis, and ~100 gal/st dry wood on an LHV ethanol-equivalent basis; the carbon balance shows 55% of carbon ends in fuel products.
## Methods
- Conceptual process design and technoeconomic analysis using literature-based process flow diagrams, modeled in CHEMCAD, with capital costing from literature and Aspen Icarus, assembled in Excel, and evaluated by discounted cash flow.
- Basis: hybrid poplar wood chips delivered at 50 wt% moisture, with a 2,000 mtpd bone-dry feed rate and an assumed established (“nth”) plant.
- Main process analyzed: feed drying and size reduction, circulating fluidized bed fast pyrolysis at 520°C, two-stage hydrotreating to stable oil, hydrocracking of the heavy fraction, distillation to gasoline/diesel blendstocks, and steam reforming for hydrogen.
## Limitations
- The paper states that other pyrolytic processes and upgrading steps were not evaluated, and gasification pathways were also not addressed.
- It also states the technology is a goal case projected to be available between now and 2015, and that fast pyrolysis upgrading to transportation fuels had only been demonstrated at laboratory and small engineering development scale.
- Evident from the text: the analysis relies heavily on literature and vendor estimates and uses stoichiometric models for upgrading, so the results are design-case estimates rather than demonstration data.
Model-written summary of a shortened version of the paper’s full text (it is longer than we read). Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 5 Not valid · 11 Not checked · 43 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Reducing the project contingency to three percent of the total capital project, (similar to that used in Phillips et al. 2007), reduces the selling price by about $0.22/gal.”
What the sources say
- Partly supportedcites Phillips et al. 2007 matched to “Thermochemical Ethanol via Indirect Gasification and Mixed Alcohol Synthesis of Lignocellulosic Biomass” (2007) sourceExperimental — accuracy not yet measured
Table 15 (Section 4.1, Capital Costs; page not provided) uses a 3% project contingency, but calculates it as a percentage of total installed cost. The same table gives contingency as 2% of total project investment, so it does not support the cited comparison if “total capital project” means total project investment. The $0.22/gal reduction is the citing authors’ own calculation, not a result attributed to this source. (LLM, conf=0.86)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The equipment spare sensitivity determines the product cost increase if both the pyrolysis unit and upgrading units had 3 reactors at 50% capacity each. This increases the selling price by about $0.21/gal.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Gasoline, lb/100 lb feed 95 Depends on feed/conditions(a,b) Diesel, lb/100 lb feed 5 Depends on feed/conditions(a,b)”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“MFSP, $/gal 2.04”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“LHV ethanol equivalent Fuel Product, gal/st dry wood, 100% renewable basis ~100”
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
30 more claims
Create a free account to see all 61 claims and every source verdict.
- Probably not a substantial claim. 11
- It may state two separate claims as one. 17
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“Table 5.3. Hydrotreating Conditions 1st Stage(a) 2nd Stage(a) Temperature, °F (°C) 465 (240) 700 (370) Pressure, psig 2500 2015”
“Stream No. 200 202 203 205 207 208 212 213 215 220 221 Temp F 110.6798 174.8342 430 465.5045 470 700 484.8971 481.4931 319.3935 150 110 Pres psig 1 2500 2495 2495 2490 2475 2475 2470 710.3041 705.3041 700.3041”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“1 Fired Heater 8.35 40.00 mmbtuh 8.18 $378,000 2004 0.65 2.47 933,660 3,057,432 $1,237,827 2”
Reported 8.18 · recomputed 4.790419
Citations
Cites
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Plant design and economics for chemical engineers
Peters, M. S., & Timmerhaus, K. D. (1958) · Cited by 4,067
Historical Developments in Hydroprocessing Bio-oils
Elliott, D. C. (2007) · Energy & Fuels · doi:10.1021/ef070044u · Cited by 1,370
Self-citationAden, A., Ruth, M., Ibsen, K., Jechura, J., Neeves, K., Sheehan, J., Wallace, B., Montague, L., Slayton, A., & Lukas, J. (2002) · doi:10.2172/15001119 · Cited by 1,197
Handbook of Petroleum Refining Processes
Meyers, R. A. (2003) · Cited by 969
Chemical Process Equipment : Selection and Design
Walas, S. M. (1988) · Medical Entomology and Zoology · Cited by 889
Bridgwater, A. V., Toft, A. J., & Brammer, J. G. (2002) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(01)00010-7 · Cited by 617
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Large-Scale Pyrolysis Oil Production: A Technology Assessment and Economic Analysis
Ringer, M., Putsche, V., & Scahill, J. (2006) · doi:10.2172/894989 · Cited by 370
Cited by
Items 101–200 of 320
Berghout, N., Meerman, H., van den Broek, M. A., & Faaij, A. P. C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.11.074 · Cited by 82
Economic and life cycle assessments of biomass utilization for bioenergy products
Liu, W., Wang, J., Richard, T. L., Hartley, D. S., Spatari, S., & Volk, T. A. (2017) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1770 · Cited by 71
A Review on Lignin Liquefaction: Advanced Characterization of Structure and Microkinetic Modeling
Terrell, E., Dellon, L. D., Dufour, A., Bartolomei, E., Broadbelt, L. J., & Garcia-Perez, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05744 · Cited by 71
Valorization of solid waste using advanced thermo-chemical process: A review
Bhatt, M., Chakinala, A. G., Joshi, J. B., Sharma, A., Pant, K. K., Shah, K. V., & Sharma, A. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.105434 · Cited by 74
Supply chain design and operational planning models for biomass to drop-in fuel production
Zhang, L., & Hu, G. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.08.016 · Cited by 78
“The production pathway analyzed in this paper is fast pyrolysis of corn stover with upgrading to drop-in biofuels [29].”
Watanabe, M. D. B., Cherubini, F., Tisserant, A., & Cavalett, O. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116403 · Cited by 75
Life cycle assessment of alternative fuel production by co-pyrolysis of waste biomass and plastics
Stančin, H., Strezov, V., & Mikulčić, H. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137676 · Cited by 73
Integrated biorefineries: CO2 utilization for maximum biomass conversion
Sharifzadeh, M., Wang, L., & Shah, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.001 · Cited by 73
Hughes, S. R., López-Núñez, J. C., Jones, M. A., Moser, B. R., Cox, E. J., Lindquist, M. R., Galindo-Leva, L. Á., Herrera, N. M. R., Rodríguez-Valencia, N., Gast, F., et al. (2014) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-5991-1 · Cited by 80
“After cracking has been performed, a final distillation will be necessary to collect fractions equivalent to the boiling ranges of conventional gasoline and diesel fuel (Jones et al. 2009).”
BackgroundEconomic Analysis of an Organosolv Process for Bioethanol Production
Kautto, J., Realff, M. J., Ragauskas, A. J., & Kässi, T. (2014) · BioResources · doi:10.15376/biores.9.4.6041-6072 · Cited by 65
Techno-economic analysis of biooil production process from palm empty fruit bunches
Xuan, T. N., Lim, Y., & Yeo, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.01.024 · Cited by 68
Hossain, A. K., Serrano, C., Brammer, J. B., Omran, A., Ahmed, F., Smith, D. I., & Davies, P. A. (2015) · Fuel · doi:10.1016/j.fuel.2015.12.012 · Cited by 63
“Recent research highlighted the potential of pyrolysis oils as renewable biofuels for internal combustion (IC) engine applications [17,18].”
BackgroundConversion of bio-oil to bio gasoline via pyrolysis and hydrothermal: A review
Shamsul, N. S., Kamarudin, S. K., & Rahman, N. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.245 · Cited by 69
Tan, E. C. D., Marker, T., & Roberts, M. J. (2013) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11791 · Cited by 61
Agrawal, R., & Singh, N. R. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100955 · Cited by 74
“have estimated that if a portion of the biomass is gasified to provide the H2 for HDO of the bio-oil obtained from the remaining biomass, then one could produce gasoline/diesel quality liquid fuel at a yield of 110 ege/ton of total biomass (66).”
BackgroundInfluentialFast pyrolysis of biomass for the production of liquids
Bridgwater, A. V. (2013) · Elsevier eBooks · doi:10.1533/9780857097439.2.130 · Cited by 77
Ahire, J. P., Bergman, R. D., Runge, T. M., Mousavi‐Avval, S. H., Bhattacharyya, D., Brown, T., & Wang, J. (2024) · Sustainable Energy & Fuels · doi:10.1039/d4se00749b · Cited by 74
Zheng, J.-L., Zhu, Y.-H., Zhu, M.-Q., Sun, G.-T., & Sun, R.-C. (2018) · Green Chemistry · doi:10.1039/c8gc01181h · Cited by 59
Zaimes, G. G., Beck, A. W., Janupala, R. R., Resasco, D. E., Crossley, S. P., Lobban, L. L., & Khanna, V. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00682a · Cited by 62
Feasibility of Producing and Using Biomass-Based Diesel and Jet Fuel in the United States
Milbrandt, A., Kinchin, C., & McCormick, R. (2013) · doi:10.2172/1260324 · Cited by 55
Self-citationA Techno-Economic Assessment of Renewable Diesel and Gasoline Production from Aspen Hardwood
Patel, M., Oyedun, A. O., Kumar, A., & Gupta, R. P. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-018-0359-x · Cited by 54
An integrated process for biomass pyrolysis oil upgrading: A synergistic approach
Sharifzadeh, M., Richard, C. J., Liu, K., Hellgardt, K., Chadwick, D., & Shah, N. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.03.003 · Cited by 54
Moud, P. H., Kantarelis, E., Andersson, K. J., & Engvall, K. (2017) · Fuel · doi:10.1016/j.fuel.2017.09.062 · Cited by 53
Nogueira Junior, E., Kumar, M., Pankratz, S., Oyedun, A. O., & Kumar, A. (2018) · Water Research · doi:10.1016/j.watres.2018.04.046 · Cited by 51
“Once prepared, the dried biomass is sent 262 to a fluidized bed pyrolysis reactor at 520 °C (Jones et al. 2009) with particles smaller than 2mm. 263 Following reaction, bio-char is removed by cyclones, resulting in a bio-oil yield of 264 approximately 59.9 wt% (dry basis) depending on the feedstock…”
BackgroundMethodInfluentialPatel, M., Oyedun, A. O., Kumar, A., & Gupta, R. P. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.03.026 · Cited by 53
Bio-methane via fast pyrolysis of biomass
Görling, M., Larsson, M., & Alvfors, P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.002 · Cited by 50
Exergy analysis of synthetic biofuel production via fast pyrolysis and hydroupgrading
Peters, J. F., Petrakopoulou, F., & Dufour, J. (2014) · Energy · doi:10.1016/j.energy.2014.11.019 · Cited by 50
“The stabilized oil, still with an oxygen content of 30%, is depressurized to 140 bar (HT-VALVE) and then deeply deoxygenized to less than 2% oxygen content in the second-stage hydrotreater (HTREACT2), operating at 350 C and 140 bar (CoeMo catalyst) [6,24].”
BackgroundZhao, N., Lehmann, J., & You, F. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c00704 · Cited by 50
Challenges and Opportunities in Fast Pyrolysis of Biomass: Part II
Bridgwater, A. V. (2018) · Johnson Matthey Technology Review · doi:10.1595/205651318x696738 · Cited by 49
Olafasakin, O. O., Ma, J., Zavala, V. M., Brown, R. C., Huber, G. W., & Wright, M. M. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c02321 · Cited by 55
Sadhukhan, J., & Ng, K. S. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie102339r · Cited by 48
Ringsred, A., van Dyk, S., & Saddler, J. N. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116587 · Cited by 47
Field to flight: A techno‐economic analysis of the corn stover to aviation biofuels supply chain
Bittner, A., Tyner, W. E., & Zhao, X. (2015) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1536 · Cited by 46
“Cellulosic biofuels have higher costs, which means there is higher risk for private investors, so incentives may be needed to entice private investors to invest.”
BackgroundStabilization of bio-oils using low temperature, low pressure hydrogenation
Rover, M., Hall, P. H., Johnston, P. A., Smith, R. G., & Brown, R. C. (2015) · Fuel · doi:10.1016/j.fuel.2015.02.054 · Cited by 51
Argonne National Lab. (ANL), A., Elgowainy, A., USDOE Office of Energy Efficiency and Renewable Energy (EERE), National Renewable Energy Lab. (NREL), G., USDOE Office of Energy Efficiency and Renewable Energy (EERE), (DOE), W. D. (. S. D. O. E., Han, J., Ward, J. W., Joseck, F., Gohlke, D., et al. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1324467 · Cited by 52
Hydrothermal liquefaction of Radiata Pine with Kraft black liquor for integrated biofuel production
Ong, B. H. Y., Walmsley, T. G., Atkins, M. J., & Walmsley, M. R. W. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.218 · Cited by 46
Distributed Microwave Pyrolysis of Domestic Waste
Doucet, J., Laviolette, J., Farag, S., & Chaouki, J. (2013) · Waste and Biomass Valorization · doi:10.1007/s12649-013-9216-0 · Cited by 46
Technoeconomic and Policy Analysis for Corn Stover Biofuels
Petter, R., & Tyner, W. E. (2014) · ISRN Economics · doi:10.1155/2014/515898 · Cited by 45
“This process is chosen for this study because of the relatively low cost per gallon [6–9].”
MethodZhang, Q., Gong, J., Skwarczek, M., Yue, D., & You, F. (2014) · AIChE Journal · doi:10.1002/aic.14344 · Cited by 45
“The equipment cost associated with hydrogen production from biomass feedstock is estimated using the base case data in the report by Jones et al.(12)”
BackgroundMethodInfluentialMustapha, W. F., Bolkesjø, T. F., Martinsen, T., & Trømborg, E. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.004 · Cited by 46
Cheali, P., Quaglia, A., Gernaey, K. V., & Sin, G. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4042164 · Cited by 46
Quantifying breakeven price distributions in stochastic techno-economic analysis
Zhao, X., Yao, G., & Tyner, W. E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.184 · Cited by 53
“The Pacific Northwest National Laboratory (PNNL), the National Renewable Energy Laboratory (NREL) and others conducted a large number of TEA studies on advanced biofuel production pathways (de Jong et al. 2015, Jones et al. 2009, Phillips et al. 2011, Brown et al. 2013, Zhu et al. 2011).”
BackgroundRatnasari, D. K., Yang, W., & Jönsson, P. G. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.07.012 · Cited by 44
Second‐generation biofuels: why they are taking so long
Hayes, D. J. M. (2012) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.59 · Cited by 51
Life cycle assessment of renewable diesel production from lignocellulosic biomass
Wong, A., Zhang, H., & Kumar, A. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1107-8 · Cited by 46
Woody biomass processing: Potential economic impacts on rural regions
Jackson, R., Neto, A. B. F., & Erfanian, E. (2018) · Energy Policy · doi:10.1016/j.enpol.2018.01.001 · Cited by 50
Upgrading Fast Pyrolysis Liquids
Bridgwater, A. V. (2011) · Wiley eBooks · doi:10.1002/9781119990840.ch6 · Cited by 44
Shin, W. J., Lin, B., Lai, H., Ibrahim, G., & Zang, G. (2025) · Green Chemistry · doi:10.1039/d4gc04538f · Cited by 45
Tanneru, S. K., & Steele, P. H. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.026 · Cited by 39
Miller, P., & Kumar, A. (2014) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2014.01.008 · Cited by 43
Mohajerani, S., Kumar, A., & Oni, A. O. (2018) · Energy · doi:10.1016/j.energy.2018.03.005 · Cited by 47
Well-to-wheels analysis of fast pyrolysis pathways with the GREET model.
Han, J., Elgowainy, A., Palou-Rivera, I., Dunn, J. B., & Wang, M. Q. (2011) · doi:10.2172/1036090 · Cited by 40
Design of sustainable second-generation biomass supply chains
Yazan, D. M., van Duren, I., Mes, M., Kersten, S., Clancy, J., & Zijm, H. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.08.004 · Cited by 39
Vicari, K. J., Tallam, S. S., Shatova, T., Joo, K. K., Scarlata, C. J., Humbird, D., Wolfrum, E. J., & Beckham, G. T. (2012) · Biotechnology for Biofuels · doi:10.1186/1754-6834-5-23 · Cited by 39
Wong, A., Zhang, H., & Kumar, A. (2016) · Water Research · doi:10.1016/j.watres.2016.06.045 · Cited by 41
Zeng, X., Collins, M. A., Borole, A. P., & Pavlostathis, S. G. (2016) · Water Research · doi:10.1016/j.watres.2016.11.057 · Cited by 37
Technical, economic and environmental analysis of solar thermochemical production of drop-in fuels
Moretti, C., Patil, V. R., Falter, C. P., Geissbühler, L., Patt, A., & Steinfeld, A. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.166005 · Cited by 44
“If co-located with a shared refinery, FT synthesis CAPEX can be reduced by 40 % compared to a stand-alone plant (Jones et al., 2009).”
Hydroisomerization of sustainable feedstock in biomass-to-fuel conversion: a critical review
Galadima, A., & Muraza, O. (2014) · International Journal of Energy Research · doi:10.1002/er.3257 · Cited by 40
“Jones and coworkers [89] documented a case study involving both lighter and heavier hydrocarbon fuels production from biomass by coupling pyrolysis with hydrocracking and hydrotreating processes.”
BackgroundAdvanced biofuels from pyrolysis oil…Opportunities for cost reduction
Arbogast, S., Bellman, D., Paynter, J. D., & Wykowski, J. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.09.022 · Cited by 37
Winjobi, O., Shonnard, D. R., & Zhou, W. J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00372 · Cited by 41
Pankratz, S., Kumar, M., Oyedun, A. O., Gemechu, E., & Kumar, A. (2020) · Algal Research · doi:10.1016/j.algal.2020.101815 · Cited by 36
Biochar from waste biomass as a biocatalyst for biodiesel production: an overview
Jayaraju, R. M., Gaddam, K., Ravindiran, G., Palani, S., Paulraj, M. P., Aravindan, A., Saravanan, P., & Muniasamy, S. K. (2021) · Applied Nanoscience · doi:10.1007/s13204-021-01924-2 · Cited by 41
Pacific Northwest National Laboratory (PNNL), R., Jones, S., USDOE, & Male, J. (2012) · doi:10.2172/1071990 · Cited by 34
Self-citationWright, M. M., Román‐Leshkov, Y., & Green, W. H. (2012) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1340 · Cited by 37
Techno-economic comparisons of hydrogen and synthetic fuel production using forest residue feedstock
Brown, D., Rowe, A. M., & Wild, P. M. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.06.100 · Cited by 32
National Renewable Energy Lab. (NREL), G., McMillan, C., Office of Strategic Programs (SP) USDOE Office of Energy Efficiency and Renewable Energy (EERE), et al. (2016) · doi:10.2172/1335587 · Cited by 34
Life Cycle Assessment of Gasoline and Diesel Produced via Fast Pyrolysis and Hydroprocessing
Hsu, D. D. (2011) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1009274 · Cited by 44
Techno-economic impacts of shale gas on cellulosic biofuel pathways
Brown, T. R., & Wright, M. M. (2013) · Fuel · doi:10.1016/j.fuel.2013.10.032 · Cited by 34
Two-step pyrolysis of safflower oil cake
Duman, G., Pala, M., Uçar, S., & Yanık, J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.11.023 · Cited by 35
Techno-economic analysis of Camelina-derived hydroprocessed renewable jet fuel within the US context
Shila, J. J. H., & Johnson, M. E. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116525 · Cited by 40
Valorization of lignocellulosic rice husk producing biosilica and biofuels—a review
Nawaz, S., Jamil, F., Akhter, P., Hussain, M., Jang, H., & Park, Y. (2022) · Journal of Physics Energy · doi:10.1088/2515-7655/aca5b4 · Cited by 39
“Depending on the dry biomass content, fast pyrolysis yields mainly bio-oil, which accounts for 65%–80% of the final product [177, 178].”
BackgroundImpacts of feedstock properties on the process economics of fast‐pyrolysis biorefineries
Ou, L., Kim, H., Kelley, S. S., & Park, S. (2018) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1860 · Cited by 34
Catalytic Hydroprocessing of Liquid Biomass for Biofuels Production
Bezergianni, S. (2013) · InTech eBooks · doi:10.5772/52649 · Cited by 45
Hansen, N. H., Pedersen, T. H., & Rosendahl, L. A. (2019) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1977 · Cited by 31
Tonini, D., Vadenbo, C., & Astrup, T. F. (2017) · Energy · doi:10.1016/j.energy.2017.02.037 · Cited by 34
Production of liquid hydrocarbons from pretreated bio-oil via catalytic deoxygenation with syngas
Tanneru, S. K., & Steele, P. H. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.01.062 · Cited by 33
Zeng, X., Borole, A. P., & Pavlostathis, S. G. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b01505 · Cited by 32
Rezaei, M., & Mehrpooya, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.078 · Cited by 30
Ortiz, F. J. G., Alonso‐Fariñas, B., Campanario, F. J., & Kruse, A. (2020) · Energy · doi:10.1016/j.energy.2020.118648 · Cited by 32
Vimmerstedt, L. J., Bush, B., Hsu, D. D., Inman, D., & Peterson, S. (2014) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1515 · Cited by 34
Catalytic cracking of jatropha-derived fast pyrolysis oils with VGO and their NMR characterization
Naik, D. V., Kumar, V., Prasad, B., Poddar, M. K., Behera, B., Bal, R., Khatri, O. P., Adhikari, D. K., & Garg, M. O. (2014) · RSC Advances · doi:10.1039/c4ra08128e · Cited by 32
Shemfe, M. B., Whittaker, C., Gu, S., & Fidalgo, B. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.113 · Cited by 37
Kumar, S., Lange, J., van Rossum, G., & Kersten, S. R. A. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00547 · Cited by 30
A techno-economic evaluation of bio-oil co-processing within a petroleum refinery
Ali, A. A. M., Mustafa, M. A., & Yassin, K. E. E. (2018) · Biofuels · doi:10.1080/17597269.2018.1519758 · Cited by 31
“The yield of the pyrolysis process was chosen to be 60%, which is considered suitable for such agricultural residues, while the hydrodeoxygenation process yield was assumed to be 44% and the quantity of H2 consumption was assumed to be 5 lb/100 lb dry oil [7].”
BackgroundInfluentialHydrothermal Liquefaction: A Promising Pathway Towards Renewable Jet Fuel
Biller, P., & Roth, A. (2017) · Springer eBooks · doi:10.1007/978-3-662-53065-8_23 · Cited by 41
Yun, H. A. H., Ramírez-Solís, S., & Dupont, V. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118737 · Cited by 29
“Commonly, bio-oil production from biomass via fast pyrolysis uses its own pyrolysis gas mixture (non-condensable gases) as fluidizing gas, where it needs to be sent back to the pyrolyzer (Peters et al., 2014; Jones et al., 2009; Wan Isahak et al., 2012).”
Reformulated Red Mud: a Robust Catalyst for In Situ Catalytic Pyrolysis of Biomass
Agblevor, F. A., Wang, H., Beis, S. H., Christian, K., Slade, A. F., Hietsoi, O., & Santosa, D. M. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b04015 · Cited by 27
Hydrothermal liquefaction of biomass for the production of diluents for bitumen transport
Kumar, M., Oyedun, A. O., & Kumar, A. (2017) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1787 · Cited by 28
Life cycle assessment of pyrolysis oil applications
Peters, J. F., Iribarren, D., & Dufour, J. (2014) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-014-0120-z · Cited by 31
Atsonios, K., Panopoulos, K. D., Nikolopoulos, N., Lappas, A. A., & Kakaras, E. C. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.11.009 · Cited by 27
Ex-Situ Catalytic Fast Pyrolysis Technology Pathway
Biddy, M., Dutta, A., Jones, S., & Meyer, A. (2013) · doi:10.2172/1076635 · Cited by 25
Self-citationLiaw, S., Frear, C. S., Lei, W., Zhang, S., & Garcìa-Pèrez, M. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.11.012 · Cited by 28
Uncertainty, Irreversibility, and Investment in Second-Generation Biofuels
McCarty, T. J., & Sesmero, J. (2014) · BioEnergy Research · doi:10.1007/s12155-014-9549-y · Cited by 24
Economic analysis of novel synergistic biofuel (H2Bioil) processes
Singh, N. R., Mallapragada, D. S., Agrawal, R., & Tyner, W. E. (2012) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-012-0043-5 · Cited by 29
“Pacific Northwest National Laboratory (PNNL) [25].”
BackgroundInfluentialPyrolysis oil upgrading for co-processing in standard refinery units
Mercader, F. D. M. (2010) · doi:10.3990/1.9789036530859 · Cited by 24
“[31] developed a reactivity scale showing at which temperatures different functional groups could be hydrotreated.”
BackgroundMarket and economic feasibility analysis for the implementation of 2nd generation biofuels in Greece
Mitkidis, G., Magoutas, A. I., & Kitsios, F. (2017) · Energy Strategy Reviews · doi:10.1016/j.esr.2017.12.006 · Cited by 24
Karka, P., Johnsson, F., & Papadokonstantakis, S. (2021) · Frontiers in Energy Research · doi:10.3389/fenrg.2021.636782 · Cited by 29
Hammer, N. L., Boateng, A. A., Mullen, C. A., & Wheeler, M. C. (2013) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.06.008 · Cited by 28
Sorunmu, Y., Billen, P., Elangovan, S., Santosa, D. M., & Spatari, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01266 · Cited by 22
Santos, B. S. D. F., Palacios-Bereche, M. C., Gallego, A. G., et al. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.121021 · Cited by 21
Metadata
- Authors
- Jones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S.
- Published
- 2009-02-28
- OpenAlex
- W1576941281
- Cited by
- 320
- References
- 16
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 5 · 2023: 9 · 2022: 7 · 2021: 15 · 2020: 14 · 2019: 17 · 2018: 26 · 2017: 27 · 2016: 33 · 2015: 28 · 2014: 40 · 2013: 37 · 2012: 22
- Type
- report
- Language
- en
- Open access
- gold
- doi.org
- Locations
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- University of North Texas Digital Library (University of North Texas) (submittedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Chemical Engineering › Catalysis › Catalysis and Hydrodesulfurization Studies
- Keywords
- biomass-to-liquids, fast pyrolysis, hydrotreating, hydrocracking, bio-oil upgrading, renewable gasoline, renewable diesel, hybrid poplar, hydrogen production, production cost analysis, capital investment, process design, distillation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-06, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-06 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.