The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Organ Printing: Promises and Challenges
Abstract
Organ printing or biomedical application of rapid prototyping, also defined as additive layer-by-layer biomanufacturing, is an emerging transforming technology that has potential for surpassing traditional solid scaffold-based tissue engineering. Organ printing has certain advantages: it is an automated approach that offers a pathway for scalable reproducible mass production of tissue engineered products; it allows a precised simultaneous 3D positioning of several cell types; it enables creation tissue with a high level of cell density; it can solve the problem of vascularization in thick tissue constructs; finally, organ printing can be done in situ. The ultimate goal of organ-printing technology is to fabricate 3D vascularized functional living human organs suitable for clinical implantation. The main practical outcomes of organ-printing technology are industrial scalable robotic biofabrication of complex human tissues and organs, automated tissue-based in vitro assays for clinical diagnostics, drug discovery and drug toxicity, and complex in vitro models of human diseases. This article describes conceptual framework and recent developments in organ-printing technology, outlines main technological barriers and challenges, and presents potential future practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Self-citationHutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Rapid Prototyping, Principles and Applications
(2010) · Assembly Automation · doi:10.1108/aa.2010.03330dae.001 · Cited by 692
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467 · cited 4×
“, who also claimed that [15]:”
BackgroundInfluentialFabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels
Tsang, V. L., Chen, A. A., Cho, L. M., Jadin, K. D., Sah, R. L., DeLong, S., West, J. L., & Bhatia, S. N. (2007) · The FASEB Journal · doi:10.1096/fj.06-7117com · Cited by 462
Engineering biological structures of prescribed shape using self-assembling multicellular systems
Jakab, K., Neagu, A., Mironov, V., Markwald, R. R., & Forgacs, G. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0400164101 · Cited by 394
Self-citationDhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Self-citationTissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Self-citationVascularized organoid engineered by modular assembly enables blood perfusion
McGuigan, A. P., & Sefton, M. V. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602740103 · Cited by 372
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Tissue Engineering: The Challenges Ahead
Langer, R. S., & Vacanti, J. P. (1999) · Scientific American · doi:10.1038/scientificamerican0499-86 · Cited by 362
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Computer‐aided tissue engineering: overview, scope and challenges
Sun, W., Darling, A., Starly, B., & Nam, J. (2004) · Biotechnology and Applied Biochemistry · doi:10.1042/ba20030108 · Cited by 341
Review: Bioprinting: A Beginning
Mironov, V., Reis, N., & Derby, B. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.631 · Cited by 319
Self-citationMicroscale tissue engineering using gravity-enforced cell assembly
Kelm, J. M., & Fussenegger, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.02.002 · Cited by 297
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Laser‐guided direct writing for three‐dimensional tissue engineering
Nahmias, Y., Schwartz, R. E., Verfaillie, C. M., & Odde, D. J. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20585 · Cited by 264
Vozzi, G., Previti, A., De Rossi, D., & Ahluwalia, A. (2002) · Tissue Engineering · doi:10.1089/107632702320934182 · Cited by 249
Payment for Living Donor (Vendor) Kidneys: A Cost-Effectiveness Analysis
Matas, A. J., & Schnitzler, M. (2004) · American Journal of Transplantation · doi:10.1046/j.1600-6143.2003.00290.x · Cited by 234
Dynamics of the Self-Assembly of Complex Cellular Aggregates on Micromolded Nonadhesive Hydrogels
Napolitano, A. P., Chai, P., Dean, D. M., & Morgan, J. R. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0190 · Cited by 228
Tissue engineering with the aid of inkjet printers
Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221
Selective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Design of Custom-Shaped Vascularized Tissues Using Microtissue Spheroids as Minimal Building Units
Kelm, J. M., Djonov, V., Ittner, L. M., Fluri, D. A., Born, W., Hoerstrup, S. P., & Fussenegger, M. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2151 · Cited by 164
Editorial: Tissue Engineering: Perspectives, Challenges, and Future Directions
Langer, R. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0219 · Cited by 140
Nahmias, Y., & Odde, D. J. (2006) · Nature Protocols · doi:10.1038/nprot.2006.386 · Cited by 134
Design of Artificial Myocardial Microtissues
Kelm, J. M., Ehler, E., Nielsen, L. K., Schlatter, S., Perriard, J., & Fussenegger, M. (2004) · Tissue Engineering · doi:10.1089/107632704322791853 · Cited by 131
Mironov, V. A., Prestwich, G. D., & Forgács, G. (2007) · Journal of Materials Chemistry · doi:10.1039/b617903g · Cited by 130
Self-citationTissue fusion and cell sorting in embryonic development and disease: biomedical implications
Pérez-Pomares, J. M., & Foty, R. A. (2006) · BioEssays · doi:10.1002/bies.20442 · Cited by 118
Three-dimensional tissue constructs built by bioprinting
Jakab, K., Damon, B. J., Neagu, A., Kachurin, A., & Forgács, G. (2006) · Biorheology · doi:10.1177/0006355x2006043003004033 · Cited by 114
Fabrication of Three-Dimensional Tissues
Tsang, V. L., & Bhatia, S. N. (2006) · Springer eBooks · doi:10.1007/10_010 · Cited by 97
VEGF profiling and angiogenesis in human microtissues
Kelm, J. M., Sánchez-Bustamante, C. D., Ehler, E., Hoerstrup, S. P., Djonov, V., Ittner, L. M., & Fussenegger, M. (2005) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2005.03.016 · Cited by 91
Multiphase electropatterning of cells and biomaterials
Albrecht, D. R., Underhill, G. H., Mendelson, A., & Bhatia, S. N. (2007) · Lab on a Chip · doi:10.1039/b701306j · Cited by 82
Role of Physical Mechanisms in Biological Self-Organization
Neagu, A., Jakab, K., Jamison, R., & Forgács, G. (2005) · Physical Review Letters · doi:10.1103/physrevlett.95.178104 · Cited by 76
Fabrication of cells containing gel modules to assemble modular tissue-engineered constructs
McGuigan, A. P., Leung, B. M., & Sefton, M. V. (2006) · Nature Protocols · doi:10.1038/nprot.2006.443 · Cited by 63
Kelm, J. M., Djonov, V., Hoerstrup, S. P., Guenter, C. I., Ittner, L. M., Greve, F., Hierlemann, A. R., Sánchez-Bustamante, C. D., Perriard, J., Ehler, E., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2541 · Cited by 59
Organ printing: Fiction or science
Jakab, K., Neagu, A., Mironov, V. A., & Forgács, G. (2004) · Biorheology · doi:10.1177/0006355x2004041003004026 · Cited by 55
Self-citationA Modular Tissue Engineering Construct Containing Smooth Muscle Cells and Endothelial Cells
Leung, B. M., & Sefton, M. V. (2007) · Annals of Biomedical Engineering · doi:10.1007/s10439-007-9380-0 · Cited by 52
McGuigan, A. P., & Sefton, M. V. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0253 · Cited by 51
Novel Intra-Tissue Perfusion System for Culturing Thick Liver Tissue
Khong, Y. M., Zhang, J., Zhou, S.-B., Cheung, C., Doberstein, K., Samper, V., & Yu, H. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0040 · Cited by 45
Design Criteria for a Modular Tissue-Engineered Construct
McGuigan, A. P., & Sefton, M. V. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0245 · Cited by 30
Cited by
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Designing materials to direct stem-cell fate
Lutolf, M. P., Gilbert, P. M., & Blau, H. M. (2009) · Nature · doi:10.1038/nature08602 · Cited by 1,393
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Self-citationAdditive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Metadata
- Authors
- Mironov, V., Kasyanov, V., Drake, C., & Markwald, R. R.
- Venue
- Regenerative Medicine
- Publisher
- Informa UK Limited
- Published
- 2007-12-21
- Volume
- 3
- Issue
- 1
- Pages
- 93-103
- ISSN
- 1746-0751 (ISSN-L)
- 1746-076X
- OpenAlex
- W2131832764
- Cited by
- 258
- References
- 47
- FWCI
- 8.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.