The DOI matches its OpenAlex record.
Critical Metals in Strategic Energy Technologies - Assessing Rare Metals as Supply-Chain Bottlenecks in Low-Carbon Energy Technologies
Abstract
Due to the rapid growth in demand for certain materials, compounded by political risks associated with the geographical concentration of the supply of them, a shortage of these materials could be a potential bottleneck to the deployment of low-carbon energy technologies. In order to assess whether such shortages could jeopardise the objectives of the EU’s Strategic Energy Technology Plan (SET-Plan), an improved understanding of these risks is vital. In particular, this report examines the use of metals in the six low-carbon energy technologies of SET-Plan, namely: nuclear, solar, wind, bioenergy, carbon capture and storage (CCS) and electricity grids. The study looks at the average annual demand for each metal for the deployment of the technologies in Europe between 2020 and 2030. The demand of each metal is compared to the respective global production volume in 2010. This ratio (expressed as a percentage) allows comparing the relative stress that the deployment of the six technologies in Europe is expected to create on the global supplies for these different metals. The study identifies 14 metals for which the deployment of the six technologies will require 1% or more (and in some cases, much more) of current world supply per annum between 2020 and 2030. These 14 significant metals, in order of decreasing demand, are tellurium, indium, tin, hafnium, silver, dysprosium, gallium, neodymium, cadmium, nickel, molybdenum, vanadium, niobium and selenium. The metals are examined further in terms of the risks of meeting the anticipated demand by analysing in detail the likelihood of rapid future global demand growth, limitations to expanding supply in the short to medium term, and the concentration of supply and political risks associated with key suppliers. The report pinpoints 5 of the 14 metals to be at high risk, namely: the rare earth metals neodymium and dysprosium, and the by-products (from base metals) indium, tellurium and gallium. The report explores a set of potential mitigation strategies, ranging from expanding European output, increasing recycling and reuse to reducing waste and finding substitutes for these metals in their main applications. A number of recommendations are provided which include: \n•\tensuring that materials used in significant quantities are included in the Raw Materials Yearbook proposed by the Raw Materials Initiative ad hoc Working Group, \n•\tthe publication of regular studies on supply and demand for critical metals,\n•\tefforts to ensure reliable supply of ore concentrates at competitive prices,\n•\tpromoting R&D and demonstration projects on new lower cost separation processes, particularly those from by-product or tailings containing rare earths,\n•\tcollaborating with other countries/regions with a shared agenda of risk reduction,\n•\traising awareness and engaging in an active dialogue with zinc, copper and aluminium refiners over by-product recovery,\n•\tcreating incentives to encourage by-product recovery in zinc, copper and aluminium refining in Europe,\n•\tpromoting the further development of recycling technologies and increasing end-of-life collection,\n•\tmeasures for the implementation of the revised WEEE Directive, and\n•\tinvesting broadly in alternative technologies.\nIt is also recommended that a similar study should be carried out to identify the metal requirements and associated bottlenecks in other green technologies, such as electric vehicles, low-carbon lighting, electricity storage and fuel cells and hydrogen.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mineral supply for sustainable development requires resource governance
Ali, S. H., Giurco, D., Arndt, N., Nickless, E., Brown, G., Demetriades, A., Durrheim, R., Enriquez, M. A., Kinnaird, J., Littleboy, A., et al. (2017) · Nature · doi:10.1038/nature21359 · Cited by 803
A review on metal hydride materials for hydrogen storage
Klopčič, N., Grimmer, I., Winkler, F., Sartory, M., & Trattner, A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108456 · Cited by 653
REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: A Critical Review
Yang, Y., Walton, A., Sheridan, R., Güth, K., Gauß, R., Gutfleisch, O., Buchert, M., Steenari, B.-M., Van Gerven, T., Jones, P. T., et al. (2017) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-016-0090-4 · Cited by 650
Meinardi, F., Ehrenberg, S., Dhamo, L., Carulli, F., Mauri, M., Bruni, F., Simonutti, R., Kortshagen, U., & Brovelli, S. (2017) · Nature Photonics · doi:10.1038/nphoton.2017.5 · Cited by 410
Material bottlenecks in the future development of green technologies
Valero, A., Valero, A., Calvo, G., & Ortego, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.05.041 · Cited by 366
Rademaker, J. H., Kleijn, R., & Yang, Y. (2013) · Environmental Science & Technology · doi:10.1021/es305007w · Cited by 344
Watari, T., McLellan, B. C., Giurco, D., Dominish, E., Yamasue, E., & Nansai, K. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.05.015 · Cited by 341
A review of methods and data to determine raw material criticality
Schrijvers, D., Hool, A., Blengini, G. A., Chen, W.-Q., Dewulf, J., Eggert, R., van Ellen, L., Gauss, R., Goddin, J., Habib, K., et al. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104617 · Cited by 324
Practical Aspects of Modern and Future Permanent Magnets
McCallum, R. W., Lewis, L., Skomski, R., Kramer, M. J., & Anderson, I. E. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113457 · Cited by 297
Habib, K., & Wenzel, H. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.04.035 · Cited by 278
Tin‐ and Lead‐Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective
Serrano‐Lujan, L., Espinosa, N., Larsen‐Olsen, T. T., Abad, J., Urbina, A., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501119 · Cited by 269
The Growing Role of Minerals and Metals for a Low Carbon Future
World Bank Group (2017) · World Bank, Washington, DC eBooks · doi:10.1596/28312 · Cited by 260
Substitution strategies for reducing the use of rare earths in wind turbines
Pavel, C. C., Lacal-Arántegui, R., Marmier, A., Schüler, D., Tzimas, E., Buchert, M., Jenseit, W., & Blagoeva, D. (2017) · Resources Policy · doi:10.1016/j.resourpol.2017.04.010 · Cited by 235
Self-citationSimon, B., Ziemann, S., & Weil, M. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.07.011 · Cited by 113
Technology scale and supply chains in a secure, affordable and low carbon energy transition
Hoggett, R. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.12.006 · Cited by 94
Metadata
- Authors
- Moss, R. L. B., Tzimas, E., Kara, K., Willis, P., & Kooroshy, J.
- Venue
- Joint Research Centre (European Commission)
- Publisher
- European Commission
- Published
- 2011-11-15
- OpenAlex
- W1484237280
- Cited by
- 212
- References
- 0
- FWCI
- 30.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.