Cited by 751High Temperature Alloys and CreepFatigue and fracture mechanicsMechanical Failure Analysis and Simulation

The DOI matches its Crossref record.

Damage Mechanisms and Life Assessment of High-Temperature Components

Viswanathan, R.·1989·ASM International eBooks

DOI 10.31399/asm.tb.dmlahtc.9781627083409

Open this paper in CoChat — free account

Abstract

Damage Mechanisms and Life Assessment of High-Temperature Components deals with the underlying causes of high-temperature failures and their effect on component life and reliability. The first few chapters develop the theory necessary to understand and analyze high-temperature damage phenomena, including fracture, creep, and fatigue. Various forms of embrittlement and corrosion are also addressed as are creep-fatigue, thermal fatigue, and welding defects. The chapters that follow discuss the practical implications of these phenomena, explaining how to assess damage and estimate the remaining service life of boiler tubes, turbine blades, reactor vessels, nozzles, and other components. Life-assessment procedures draw on a knowledge of design, material behavior, and nondestructive inspection techniques, which are covered as well. The book makes extensive use of data plots, diagrams, and images and includes many worked-out examples and case histories. It also serves as a ready source of material property data. For information on the print version, ISBN 978-0-87170-358-3, follow this link.

Integrity signals

Registry

Crossref · 10.31399/asm.tb.dmlahtc.9781627083409

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Still being checked.

Sorted by citations

Materials for Ultrasupercritical Coal Power Plants - Boiler Materials: Part 1
Viswanathan, R., & Bakker, W. T. (2001) · Journal of Materials Engineering and Performance · doi:10.1361/105994901770345394 · Cited by 553
Self-citation
Boiler Materials for Ultra-Supercritical Coal Power Plants—Steamside Oxidation
Viswanathan, R., Sarver, J. M., & Tanzosh, J. M. (2006) · Journal of Materials Engineering and Performance · doi:10.1361/105994906x108756 · Cited by 327
Self-citation
On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels
Kostka, A., Tak, K.-G., Hellmig, R. J., Estrin, Y., & Eggeler, G. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.08.046 · Cited by 292
Causes of breakdown of creep strength in 9Cr–1.8W–0.5Mo–VNb steel
Lee, J., Armaki, H. G., Maruyama, K., Muraki, T., & Asahi, H. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.05.010 · Cited by 263
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry
Hadzihafizovic, D., & Mahdy, A. (2020) · Cited by 249
Combating hot corrosion of boiler tubes – A study
Kumar, S., Kumar, M., & Handa, A. (2018) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2018.08.004 · Cited by 214
A review of non-destructive techniques for the detection of creep damage in power plant steels
Sposito, G., Ward, C., Cawley, P., Nagy, P. B., & Scruby, C. B. (2010) · NDT & E International · doi:10.1016/j.ndteint.2010.05.012 · Cited by 206
A study of the creep behavior of modified 9Cr–1Mo steel using continuum-damage modeling
Basirat, M., Shrestha, T., Potirniche, G. P., Charit, I., & Rink, K. K. (2012) · International Journal of Plasticity · doi:10.1016/j.ijplas.2012.04.004 · Cited by 172
High-temperature and low-stress creep anisotropy of single-crystal superalloys
Jácome, L. A., Nörtershäuser, P., Heyer, J.-K., Lahni, A., Frenzel, J. A., Dlouhý, A., Somsen, C., & Eggeler, G. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.052 · Cited by 170
A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction
Wen, J., & Tu, S. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.001 · Cited by 164
A generalized energy-based fatigue–creep damage parameter for life prediction of turbine disk alloys
Zhu, S., Huang, H., He, L., Liu, Y., & Wang, Z. (2012) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2012.04.021 · Cited by 161
A review of creep analysis and design under multi-axial stress states
Yao, H.-T., Xuan, F., Wang, Z., & Tu, S. (2007) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2007.02.003 · Cited by 154
Development of the MPC Omega Method for Life Assessment in the Creep Range
Prager, M. (1995) · Journal of Pressure Vessel Technology · doi:10.1115/1.2842111 · Cited by 146
Requirements for and use of miniature test specimens to provide mechanical and creep properties of materials: a review
Hyde, T. H., Sun, W., & Williams, J. A. (2007) · International Materials Reviews · doi:10.1179/174328007x160317 · Cited by 138
Effects of filler–filler and polymer–filler interactions on rheological and mechanical properties of HDPE–wood composites
Huang, H., & Zhang, J. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29336 · Cited by 128
Hardening mechanisms and impact toughening of a high-strength steel containing low Ni and Cu additions
Kong, H., Xu, C., Bu, C., Chen, D., Luan, J., Jiao, Z., Chen, D., & Liu, C. T. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.041 · Cited by 128
High temperature solar thermal central-receiver billboard design
Boerema, N., Morrison, G. L., Taylor, R. A., & Rosengarten, G. (2013) · Solar Energy · doi:10.1016/j.solener.2013.09.008 · Cited by 126
Effects of Stress Level and Stress State on Creep Ductility: Evaluation of Different Models
Wen, J., Tu, S. T., Xuan, F., Zhang, X., & Gao, X.-L. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.02.014 · Cited by 120
Fracture Toughness by Small Punch Testing
Foulds, J. R., Woytowitz, P., Parnell, T. K., & Jewett, C. W. (1995) · Journal of Testing and Evaluation · doi:10.1520/jte10392j · Cited by 107
A strain energy density method for the prediction of creep–fatigue damage in high temperature components
Payten, W. M., Dean, D., & Snowden, K. U. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.11.028 · Cited by 104
Overload Failures
Miller, B. A. (2002) · ASM International eBooks · doi:10.31399/asm.hb.v11.a0003543 · Cited by 95
Low cycle fatigue and cyclic softening behaviour of martensitic cast steel
Golański, G., & Mroziński, S. (2013) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2013.06.019 · Cited by 93
Microstructural development and creep behavior in A286 superalloy
Cicco, H. D., Luppo, M. I., Gribaudo, L. M., & Ovejero-García, J. (2004) · Materials Characterization · doi:10.1016/j.matchar.2004.03.007 · Cited by 87
Assessment of microstructures and mechanical behaviour of metallic materials through non-destructive characterisation
Raj, B., Moorthy, V., Jayakumar, T., & Rao, K. B. S. (2003) · International Materials Reviews · doi:10.1179/095066003225010254 · Cited by 84
Failure Mechanisms of High Temperature Components in Power Plants
Viswanathan, R., & Stringer, J. (2000) · Journal of Engineering Materials and Technology · doi:10.1115/1.482794 · Cited by 81
Self-citation
Estimating power plant start costs in cyclic operation
Keatley, P., Shibli, A., & Hewitt, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.033 · Cited by 81
Gas Turbines for Electric Power Generation
Gülen, S. C. (2019) · Cambridge University Press eBooks · doi:10.1017/9781108241625 · Cited by 75
Performance of different coating materials against high temperature oxidation in boiler tubes – A review
Singh, J., Vasudev, H., & Singh, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.156 · Cited by 76
Wind energy is not sustainable when balanced by fossil energy
Emblemsvåg, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117748 · Cited by 71
A unified criterion for fatigue–creep life prediction of high temperature components
Zhu, S., Yang, Y., Huang, H., Lv, Z., & Wang, H. (2016) · Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering · doi:10.1177/0954410016641448 · Cited by 68
Energy-based approach for the evaluation of low cycle fatigue behaviour of 2.25Cr–1Mo steel at elevated temperature
Callaghan, M. D., Humphries, S. R., Law, M., Ho, M. K. M., Bendeich, P. J., Li, H., & Yeung, W. Y. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.05.011 · Cited by 68
An investigation of the failure of low pressure steam turbine blades
Mukhopadhyay, N. K., Chowdhury, S. G., Das, G., Chattoraj, I., Das, S. K., & Bhattacharya, D. K. (1998) · Engineering Failure Analysis · doi:10.1016/s1350-6307(98)00016-8 · Cited by 68
Coatings in the electricity supply industry: past, present, and opportunities for the future
Stringer, J. (1998) · Surface and Coatings Technology · doi:10.1016/s0257-8972(98)00642-2 · Cited by 67
A generalized frequency separation–strain energy damage function model for low cycle fatigue–creep life prediction
Zhu, S., & Huang, H. (2010) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/j.1460-2695.2009.01431.x · Cited by 65
Premature creep failure in strength enhanced high Cr ferritic steels caused by static recovery of tempered martensite lath structures
Armaki, H. G., Chen, R., Maruyama, K., & Igarashi, M. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.07.037 · Cited by 63
Failure analysis of the final stage blade in steam turbine
Wang, W., Xuan, F., Zhu, K.-L., & Tu, S. (2006) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2006.03.004 · Cited by 61
Fuel ash corrosion of boiler and superheater tubes
SRIVASTAVA, S. C., Godiwalla, K. M., & Banerjee, M. K. (1997) · Journal of Materials Science · doi:10.1023/a:1018585129341 · Cited by 61
Ferritic power plant steels: remanent life assessment and approach to equilibrium
Bhadeshia, H. K. D. H., Strang, A., & Gooch, D. J. (1998) · International Materials Reviews · doi:10.1179/095066098790105672 · Cited by 61
Influence of service-induced microstructural changes on the failure of a cobalt-based superalloy first stage nozzle
Zangeneh, S., & Farhangi, H. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.02.021 · Cited by 59
Advanced Materials for Land Based Gas Turbines
Singh, K. (2014) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-014-0398-3 · Cited by 59
Development of creep-resistant steels and alloys for use in power plants
Abe, F. (2014) · Elsevier eBooks · doi:10.1533/9780857097552.2.250 · Cited by 59
Investigation of turbine blade failure in a thermal power plant
Ziegler, D., Puccinelli, M., Bergallo, B., & Picasso, A. (2013) · Case Studies in Engineering Failure Analysis · doi:10.1016/j.csefa.2013.07.002 · Cited by 58
Prediction of Thermal-Mechanical Fatigue Life for Gas Turbine Blades in Electric Power Generation
Bernstein, H. L., Grant, T. S., McClung, R. C., & Allen, J. H. (1993) · doi:10.1520/stp24258s · Cited by 58
Multilevel approach to lifetime assessment of steam turbines
Banaszkiewicz, M. (2014) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2014.10.009 · Cited by 56
An efficient life prediction methodology for low cycle fatigue–creep based on ductility exhaustion theory
Zhu, S., Huang, H., Liu, Y., Yuan, R., & He, L. (2012) · International Journal of Damage Mechanics · doi:10.1177/1056789512456030 · Cited by 56
Creep properties of service-exposed Alloy 625 after re-solution annealing treatment
Mathew, M. D., Rao, K. B. S., & Mannan, S. L. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.01.042 · Cited by 56
Model predictive control and the optimization of power plant load while considering lifetime consumption
Gallestey, E., Stothert, A., Antoine, M., & Morton, S. (2002) · IEEE Transactions on Power Systems · doi:10.1109/59.982212 · Cited by 54
On the physical basis of a Larson-Miller constant of 20
Maruyama, K.-I., Abe, F., Satō, H., Shimojo, J., Sekido, N., & Yoshimi, K. (2017) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2017.11.013 · Cited by 52
Some aspects of metallurgical assessment of boiler tubes—Basic principles and case studies
Chaudhuri, S. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.06.026 · Cited by 51
Hot Corrosion & Erosion Problems in Coal Based Power Plants in India and Possible Solutions – A Review
Chawla, V., Chawla, A., Puri, D., Prakash, S., Gurbuxani, P. G., & Sidhu, B. S. (2011) · Journal of Minerals and Materials Characterization and Engineering · doi:10.4236/jmmce.2011.104027 · Cited by 50
Assessment of power law creep constants of Gr91 steel using small punch creep tests
W., Y., SHIM, S., & Yoon, K. B. (2009) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/j.1460-2695.2009.01394.x · Cited by 49
Evaluation of the creep cavitation behavior in Grade 91 steels
Siefert, J. A., & Parker, J. D. (2016) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2016.02.018 · Cited by 49
Crack evaluation of the fourth stage blade in a low-pressure steam turbine
Kim, H.-J. (2010) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2010.11.004 · Cited by 49
Assessment of low-cycle fatigue life of Sn-3.5mass%Ag-X (X=Bi or Cu) alloy by strain range partitioning approach
Kariya, Y., Morihata, T., 羽沢, 栄., & Otsuka, M. (2001) · Journal of Electronic Materials · doi:10.1007/s11664-001-0148-2 · Cited by 49
Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant
Ray, A. K., Tiwari, Y. N., Roy, P. K., Chaudhuri, S., Bose, S. C., Ghosh, R. N., & Whittenberger, J. D. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.11.019 · Cited by 49
Welding of Materials for Energy Applications
DuPont, J. N., Babu, S. S., & Liu, S. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-1643-9 · Cited by 47
Numerical investigations of crack initiation in impulse steam turbine rotors subject to thermo-mechanical fatigue
Banaszkiewicz, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.099 · Cited by 46
Creep Constitutive Models Suitable for Solder Alloys in Electronic Assemblies
Mukherjee, S., Nuhi, M., Dasgupta, A., & Modarres, M. (2016) · Journal of Electronic Packaging · doi:10.1115/1.4033375 · Cited by 45
Mechanism of microstructural deterioration preceding type IV failure in weldment of Mod.9Cr-1Mo steel
Lee, J. S., & Maruyama, K. (2015) · Metals and Materials International · doi:10.1007/s12540-015-4569-5 · Cited by 44
Comparison of Fuzzy logic and Neural Network in life prediction of boiler tubes
MAJIDIAN, A., & SAIDI, M. (2006) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2006.05.001 · Cited by 44
Microstructural sensitivity of 316H austenitic stainless steel: Residual stress relaxation and grain boundary fracture
Chen, B., Flewitt, P. E. J., & Smith, D. J. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.08.010 · Cited by 42
HIGH TEMPERATURE FATIGUE‐CREEP BEHAVIOUR OF SINGLE CRYSTAL SRR99 NICKEL BASE SUPERALLOYS: PART II—FATIGUE‐CREEP LIFE BEHAVIOUR
Li, S. X., & Smith, D. J. (1995) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/j.1460-2695.1995.tb01423.x · Cited by 42
Stress rupture predictions of pressure vessels exposed to fully engulfing and local impingement accidental fire heat loads
Manu, C. C., Birk, A. M., & Kim, I. Y. (2008) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2008.07.018 · Cited by 41
Review of temperature indicators and the use of duplex stainless steels for life assessment
Shek, C. H., Wong, K. W., & Lai, J. K. L. (1997) · Materials Science and Engineering R Reports · doi:10.1016/s0927-796x(97)00001-6 · Cited by 41
Elevated-Temperature Life Assessment for Turbine Components, Piping, and Tubing
Benac, D. J., & Swaminathan, V. P. (2002) · ASM International eBooks · doi:10.31399/asm.hb.v11.a0003517 · Cited by 40
Creep property measurement of service-exposed SUS 316 austenitic stainless steel by the small-punch creep-testing technique
Saucedo‐Muñoz, M. L., KOMAZAKI, S.-I., Takahashi, T., Hashida, T., & Shoji, T. (2002) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2002.0288 · Cited by 39
On the effect of grain boundary segregation on creep and creep rupture
Otto, F., Viswanathan, G. B., Payton, E. J., Frenzel, J. A., & Eggeler, G. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.02.004 · Cited by 38
A 3D-printed flow distributor with uniform flow rate control for multi-stacked microfluidic systems
Park, Y., Yu, T., Yim, S., You, D., & Kim, D. (2018) · Lab on a Chip · doi:10.1039/c8lc00004b · Cited by 38
Failure analysis of boiler tube at a petrochemical plant
Hosseini, R. K., & Yareiee, S. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.104146 · Cited by 38
High temperature low cycle fatigue
Rodríguez, P., & Mannan, S. L. (1995) · Sadhana · doi:10.1007/bf02747287 · Cited by 38
The linear‐elastic Theory of Critical Distances to estimate high‐cycle fatigue strength of notched metallic materials at elevated temperatures
Louks, R., & Susmel, L. (2014) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12273 · Cited by 38
Failure case studies of SA213-T22 steel tubes of boiler through computer simulations
Purbolaksono, J., Ahmad, J., Khinani, A., Ali, A. A., & Rashid, A. (2009) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2009.06.005 · Cited by 37
Creep property evaluation of light alloys by means of the Small Punch test: Creep master curves
Andrés, D., Lacalle, R., & Álvarez, J. A. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.023 · Cited by 37
Prevention of the overestimation of long-term creep rupture life by multiregion analysis in strength enhanced high Cr ferritic steels
Armaki, H. G., Maruyama, K., Yoshizawa, M., & Igarashi, M. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.01.072 · Cited by 36
Failure of a super heater tube
Das, G., Chowdhury, S. G., Ray, A. K., Das, S. K., & Bhattacharaya, D. K. (2002) · Engineering Failure Analysis · doi:10.1016/s1350-6307(01)00040-1 · Cited by 36
A versatile computational tool for model-based design, control and diagnosis of a generic Solid Oxide Fuel Cell Integrated Stack Module
Gallo, M., Marra, D., Sorrentino, M., Pianese, C., & Au, S. F. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.062 · Cited by 35
Changes in Monkman-Grant relation among four creep regions of modified 9Cr-1Mo steel
Maruyama, K., Sekido, N., & Yoshimi, K. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.02.003 · Cited by 35
Gas Turbine Combined Cycle Dynamic Simulation: A Physics Based Simple Approach
Gülen, S. C., & Kim, K. (2013) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4025318 · Cited by 35
The evaluation of in-service materials degradation of low-alloy steels by the electrochemical method
Watanabe, Y. X., & Shoji, T. (1991) · Metallurgical Transactions A · doi:10.1007/bf02669877 · Cited by 35
Effect of high-temperature degradation on microstructure evolution and mechanical properties of austenitic heat-resistant steel
Choi, J., Seok, C.-S., Park, S. H., & Kim, G. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2018.11.017 · Cited by 34
Evaluation, degradation and life assessment of coatings for land based combustion turbines
Cheruvu, N. S., Chan, K. S., & Viswanathan, R. (2006) · Energy Materials · doi:10.1179/174892306x99705 · Cited by 34
Self-citation
On-line tool condition monitoring and control system in forging processes
Kong, L., & Nahavandi, S. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00367-9 · Cited by 33
Long term creep–rupture behaviour of 813K exposed 2.25–1Mo steel between 773 and 873K
Ray, A. K., Diwakar, K., Prasad, B. N., Tiwari, Y. N., Ghosh, R. N., & Whittenberger, J. D. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.11.020 · Cited by 33
Basic Modeling and Theory of Creep of Metallic Materials
Sandström, R. (2024) · Springer series in materials science · doi:10.1007/978-3-031-49507-6 · Cited by 32
Erosion failure mechanisms in turbine stage with twisted rotor blade
Ilieva, G. (2016) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2016.07.008 · Cited by 32
Austenitic steel grades for boilers in ultra-supercritical power plants
Barnard, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100552-1.00004-x · Cited by 32
The low-cycle fatigue life assessment method for online monitoring of steam turbine rotors
Banaszkiewicz, M. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.02.032 · Cited by 31
Testing of Small-Sized Specimens
Lucon, E. (2014) · Elsevier eBooks · doi:10.1016/b978-0-08-096532-1.00110-2 · Cited by 31
Growth of naturally initiated fatigue cracks in ferritic gas turbine rotor steels
Härkegård, G., Denk, J., & Stärk, K. F. (2005) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2004.10.004 · Cited by 31
Accelerated LCF‐creep experimental methodology for durability life evaluation of turbine blade
Shi, D., Li, Z., Yang, X., & Wang, H. (2018) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12763 · Cited by 30
Determination of the Toughness of In-Service SteamTurbine Disks Using Small Punch Testing
Foulds, J. R., & Viswanathan, R. (2001) · Journal of Materials Engineering and Performance · doi:10.1361/105994901770344782 · Cited by 30
Self-citation
Thermo-Mechanical Fatigue Life Prediction: A Critical Review
Zhuang, W., & Swansson, N. S. (1998) · Cited by 30
High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
Ghosh, D., H. Roy, S. Ray, & Shukla, A. K. (2009) · High Temperature Materials and Processes · doi:10.1515/htmp.2009.28.1-2.109 · Cited by 29
Residual lifetime assessment of thermal power plant superheater header
Yasniy, O., Pyndus, Y. I., Iasnii, V., & Lapusta, Y. N. (2017) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2017.07.028 · Cited by 29
Failure analysis and retrofitting of superheater tubes in utility boiler
Shokouhmand, H., Ghadimi, B., & Espanani, R. (2015) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2015.01.003 · Cited by 29
Influence of phase transformation on the creep deformation mechanism of SA508 Gr.3 steel for nuclear reactor pressure vessels
Gao, Z., Lu, C., He, Y., Liu, R., He, H., Wang, W., Zheng, W., & Yang, J. (2019) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2019.04.006 · Cited by 29
Failure investigation of a secondary super heater tube in a 140 MW thermal power plant
Saha, A., & Roy, H. (2017) · Case Studies in Engineering Failure Analysis · doi:10.1016/j.csefa.2017.05.001 · Cited by 28
Assessment of premature failure in a first stage gas turbine nozzle
Malekbarmi, A.-A., Zangeneh, S., & Roshani, A. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2011.03.011 · Cited by 28
Creep crack growth analysis of elliptic surface cracks in pressure vessels
Yoon, K. B., Park, T. G., & Saxena, A. (2003) · International Journal of Pressure Vessels and Piping · doi:10.1016/s0308-0161(03)00101-7 · Cited by 28
Creep damage assessment for notched bar specimens of a low alloy steel considering stress multiaxiality
ISOBE, N., YASHIRODAI, K., & Murata, K. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.01.017 · Cited by 28

Authors: Viswanathan, R.
Affiliations: ASM International (US)
Corresponding author: Viswanathan, R.
Venue: ASM International eBooks
Publisher: ASM International
Published: 1989-12-01
DOI: 10.31399/asm.tb.dmlahtc.9781627083409
OpenAlex: W1972274821
Cited by: 751
References: 0
Citations by year: 2026: 12 · 2025: 9 · 2024: 13 · 2023: 13 · 2022: 20 · 2021: 24 · 2020: 24 · 2019: 32 · 2018: 29 · 2017: 22 · 2016: 38 · 2015: 30 · 2014: 37 · 2013: 38 · 2012: 26
FWCI: 15.39
Type: book
Language: en
Open access: closed
Locations: ASM International eBooks (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
Physical Sciences › Engineering › Mechanical Engineering › Mechanical Failure Analysis and Simulation
Keywords: creep, fatigue (material), fracture, embrittlement, corrosion, creep-fatigue interaction, thermal fatigue, weld defects, remaining service life prediction, boiler tubes, turbine blades, reactor pressure vessel, non-destructive testing, material property data

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Damage Mechanisms and Life Assessment of High-Temperature Components

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks