Cited by 751High Temperature Alloys and CreepFatigue and fracture mechanicsMechanical Failure Analysis and Simulation

The DOI matches its Crossref record.

Damage Mechanisms and Life Assessment of High-Temperature Components

Viswanathan, R.·1989·ASM International eBooks

DOI 10.31399/asm.tb.dmlahtc.9781627083409

Open this paper in CoChat — free account

Abstract

Damage Mechanisms and Life Assessment of High-Temperature Components deals with the underlying causes of high-temperature failures and their effect on component life and reliability. The first few chapters develop the theory necessary to understand and analyze high-temperature damage phenomena, including fracture, creep, and fatigue. Various forms of embrittlement and corrosion are also addressed as are creep-fatigue, thermal fatigue, and welding defects. The chapters that follow discuss the practical implications of these phenomena, explaining how to assess damage and estimate the remaining service life of boiler tubes, turbine blades, reactor vessels, nozzles, and other components. Life-assessment procedures draw on a knowledge of design, material behavior, and nondestructive inspection techniques, which are covered as well. The book makes extensive use of data plots, diagrams, and images and includes many worked-out examples and case histories. It also serves as a ready source of material property data. For information on the print version, ISBN 978-0-87170-358-3, follow this link.

Integrity signals

Registry

Crossref · 10.31399/asm.tb.dmlahtc.9781627083409

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Still being checked.

Sorted by citations

Items 501–600 of 749

The Effects of Test Stress and Microstructure for Cold Dwell Fatigue Properties of Ti-6Al-4V and Its Life Assessment.
Ota, Y., Kubushiro, K., & YAMAZAKI, Y. (2021) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.70.323 · Cited by 3
TECHNICAL BASIS FOR RESOLUTION OF THE IGNEOUS ACTIVITY KEY TECHNICAL ISSUE
Nrc, C. (2000) · Cited by 3
Testing Methods for High Temperature Materials
Moverare, J. J. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.12106-x · Cited by 3
Failure Analytics of Defects in Mechanical Engineering Parts Using Root Cause Analysis: Case Study
Берладір, Х. В., Hovorun, T. P., Trojanowska, J., Ivanov, V., & Iakovets, A. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-56444-4_26 · Cited by 2
Application of the Small Punch Creep Test in Predicting Creep Properties of Grade 91 Steel
Ferdous, I. U., Alang, N. A., Alias, J., & Razak, N. A. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10470-1 · Cited by 2
The role of primary and tertiary creep in defining the form of the Monkman-Grant relation using the 4-θ methodology: An application to a 1CrMoV rotor steel
Evans, M. (2025) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2025.105627 · Cited by 2
Effect of Long-Term Ageing and Associated Precipitation on the Fatigue Crack Growth Behaviour of a Ni-Based Superalloy
Pavan, A. H. V., Parnaik, A., Li, S., Ramamurty, U., & Narayan, R. L. (2026) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-026-08138-7 · Cited by 2
Effect of γ′ Size on the Stress‐Rupture Behaviour of Inconel 740H Superalloy
Parnaik, A., Pavan, A. H. V., Li, S., Ramamurty, U., & Narayan, R. L. (2026) · Advanced Engineering Materials · doi:10.1002/adem.202503206 · Cited by 2
Creep ductility of 1Cr1Mo1/4V low alloy forging and casting steels
Singh, K., & Kamaraj, M. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.127 · Cited by 2
Comprehensive reliability analysis of blistered ‘LPG’ wash water vessel in FCC unit – Part II Engineering Critical Assessment of blistered vessel
Bhattacharya, S., Kannan, C., & Lahiri, A. K. (2013) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2013.04.009 · Cited by 2
On the validation of variable fidelity multi-physics simulations
Patterson, E. A., & Whelan, M. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2019.01.051 · Cited by 2
Construction strength evaluation of boiler economizer tube materials based on hardness value
Miswar, Arsyad, H., & Arma, L. H. (2023) · AIP conference proceedings · doi:10.1063/5.0125978 · Cited by 2
Failure/Damage Mechanism of Boiler Tube
Saha, A. (2023) · Springer tracts in mechanical engineering · doi:10.1007/978-981-99-3130-9_2 · Cited by 2
The Life Assessment by Linear Cumulative Damage Rule for Cold Dwell Fatigue of Ti-6Al-4V
Ota, Y., Kubushiro, K., & YAMAZAKI, Y. (2021) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.70.35 · Cited by 2
Non destructive investigation of the condition of Gas Turbine Blades
Kolkman, H. J., & Kool, G. A. (1998) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.19980290707 · Cited by 2
Embrittlement of a steam turbine rotor
Gladh, M., & Wallén, P. (1995) · Engineering Failure Analysis · doi:10.1016/1350-6307(94)00022-1 · Cited by 2
Effect of Microstructural Variation on Hardness Degradation of 2.25Cr-1Mo Steel and Its Impact on Residual Life Assessment
Jha, B. B., Mishra, B. K., & Ojha, S. N. (2010) · Canadian Metallurgical Quarterly · doi:10.1179/000844310795937622 · Cited by 2
Metallurgical Failure Analysis of a Rotating Blade in the Compressor Section of a Gas Turbine
Ellis, F. V. (2005) · Journal of Pressure Vessel Technology · doi:10.1115/1.2172617 · Cited by 2
NONLINEAR ACOUSTICS AND MICROSTRUCTURAL EVOLUTION DURING CREEP IN Cr-Mo-V STEEL
OHTANI, T., Ogawa, T., Thompson, D. O., & Chimenti, D. E. (2010) · AIP conference proceedings · doi:10.1063/1.3362234 · Cited by 2
Metallurgical Failure Analysis of Drum Arching Tube of a 140 MW Thermal Power Plant
Mondal, A., Roy, H., Ghosh, D., & Shukla, A. K. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9855-x · Cited by 2
Evolution of the Structure of Ferritic Steels Subjected to Torsion
Gonz‡lez, G., Alessio, D., Gaston, G., Iurman, L., & Moro, L. (2012) · Procedia Materials Science · doi:10.1016/j.mspro.2012.06.017 · Cited by 2
Influence of Temperature and Long Term Ageing on the Fatigue Crack Growth in a Precipitation Hardened Martensitic Stainless Steel
Aboumou, L. D., Hénaff, G., Arzaghi, M., & Pommier, S. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.12.077 · Cited by 2
Effect of preload stress on the dynamic response of 9%Cr heat-resistant steels with various microstructures
Liu, X., Shiwa, M., & Sawada, K. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.03.102 · Cited by 2
Consumed creep life fraction assessment of critical locations of an in-service super heater outlet header under surveillance programme
Daga, R., Bandyopadhyay, G. K., Samal, M. K., Dutta, B. K., & Mohindru, A. K. (2010) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-010-0058-1 · Cited by 2
Creep Curve Modeling of Hastelloy-X Alloy by Using the Nonlinear Regression Method in the Kachanov-Rabotnov Creep Model
Kim, W. G., Yin, S. N., Ryu, W. S., Kim, Y., & Yi, W. G. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.345-346.589 · Cited by 2
Creep damage assessment of a 50 MW steam turbine shaft
Nurbanasari, M., & Suratman, R. (2015) · MATEC Web of Conferences · doi:10.1051/matecconf/20153405002 · Cited by 2
Effect of Repair Welding on the Creep Behavior of a 12Cr1MoV/GTR-2CM/P91 Dissimilar Joint
Zhao, Y., Gong, J., Jiang, Y. J., Li, Q. N., & Wang, X. W. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.12.254 · Cited by 2
A New Ductility Criterion for Fatigue-Creep Life Prediction of High Temperature Components
Zhu, S., Huang, H., Liu, Y., He, L., & Meng, D. (2014) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2014-1058 · Cited by 2
ECCC TEST PROGRAMME AND DATA ASSESSMENT ON GTD111 CREEP RUPTURE, STRAIN AND DUCTILITY
David, A. K., Bjorn, H., Evy, D. B., Keustermans, J.-P., Kolkman, H. J., Messelier-Gouze, C., Vacchieri, E., & Gomes, M. W. (2014) · Joint Research Centre (European Commission) · Cited by 2
Optimization Models for Electricity Networks and Renewable Energy under Uncertainty
Moarefdoost, M. M. (2015) · Cited by 2
Numerical Modeling of Cyclic Creep-Fatigue Damage Development for Lifetime Assessment of Steam Turbine Components
Banaszkiewicz, M. (2018) · InTech eBooks · doi:10.5772/intechopen.73186 · Cited by 2
Effects of Tempering Temperature on the Microstructure and Creep Resistance of X22CrMoV12-1 Steel Used on Steam Turbine Blades
Comeli, F. W., Rocha, A. D. S., de Oliveira, C. A. S., Lemos, G., & Castro, R. D. M. (2018) · Americanae (AECID Library) · Cited by 2
Monotonic Overload and Embrittlement
Miller, B. A. (2021) · ASM International eBooks · doi:10.31399/asm.hb.v11.a0006778 · Cited by 2
Evolutions of Nonlinear Acoustic Characterizations and Microstructural Change during Creep in Cr-Mo-V Steel
OHTANI, T., KUSANAGI, Y., & 石井, 優. (2013) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.62.60 · Cited by 2
Structural Integrity in the Petrochemical Industry
May, I. L. (2003) · Elsevier eBooks · doi:10.1016/b0-08-043749-4/01001-6 · Cited by 2
I : Overview
FUJIYAMA, K. (2009) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.58.443 · Cited by 2
Deformation and Fracture Mechanisms and Static Strength of Metals
(2005) · ASM International eBooks · doi:10.31399/asm.tb.mmfi.t69540047 · Cited by 2
Analysis of Inelastic Behavior for High Temperature Materials and Structures
Naumenko, K., & Altenbach, H. (2015) · Advanced structured materials · doi:10.1007/978-3-319-19440-0_12 · Cited by 2
Remaining life assessment of high temperature components using threshold stress concept
Singh, R. (1995) · Sadhana · doi:10.1007/bf02747285 · Cited by 2
Effect of multiaxial stresses on creep damage of 316 stainless steel weldments
Hsiao, Y.-H., Zhang, H., & Daehn, G. S. (1996) · Metallurgical and Materials Transactions A · doi:10.1007/bf02649756 · Cited by 2
Characterization of Fireside Corroded Sections of Boiler Tubes
Pavan, A. H. V., Vikrant, K. S. N., Nandi, S., & Singh, K. (2012) · Materials science forum · doi:10.4028/www.scientific.net/msf.710.701 · Cited by 2
Assessment of weld reduction factors through experimental reference curves
Grisolia, O. (2010) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2010.05.014 · Cited by 2
NDT for residual life assessment in Indian industry
Bhattacharya, D. K. (2003) · Insight - Non-Destructive Testing and Condition Monitoring · doi:10.1784/insi.45.1.31.52599 · Cited by 2
Life Prediction Strategies for Land-Based Gas Turbine Blades
Chan, K. S., Cheruvu, N. S., Leverant, G. R., & Viswanathan, R. (2013) · John Wiley & Sons, Inc. eBooks · doi:10.1002/9781118788035.ch19 · Cited by 2
Self-citation
Evaluation of Stress Corrosion Strength According to Crystal Structure of 12Cr Alloy Steel Used Steam Turbine Blade
Kang, Y.-H., Bae, D. H., & Song, J.-I. (2008) · Transactions of the Korean Society of Mechanical Engineers A · doi:10.3795/ksme-a.2008.32.11.911 · Cited by 2
Assessment of Microstructural Degradation in Metallic Materials by Acoustic and Magnetic Method
Jayakumar, T., Raj, B., & Rodríguez, P. (1995) · Springer eBooks · doi:10.1007/978-3-642-79654-8_223 · Cited by 2
Multiaxial Creep Behaviour of Welded Components in High Strength Ferritic/Martensitic Creep Resistant Steels
Coussement, C., & Verelst, L. (1994) · Springer eBooks · doi:10.1007/978-94-011-1048-8_25 · Cited by 2
Consideration of Safety Factors in the Life Extension Modelling of Components Operating at High Temperatures
Nikbin, K. M. (1998) · doi:10.1520/stp12341s · Cited by 2
Inference of Gas-liquid Flowrate using Neural NetworksPreprint
Dave, A. J., & Manera, A. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2003.08182 · Cited by 2
High-Temperature Life Assessment
Liu, A. F. (1996) · ASM International eBooks · doi:10.31399/asm.hb.v19.a0002390 · Cited by 2
L
Gräfen, H. (1993) · Springer eBooks · doi:10.1007/978-3-642-51732-7_12 · Cited by 2
Low Cycle Fatigue Life Prediction of Fossil Plant Components
Viswanathan, R. (1992) · Springer eBooks · doi:10.1007/978-94-011-2860-5_112 · Cited by 2
Self-citation
Case studies in nanostructural analysis for understanding nanomaterials
Ratinac, K. R., Zhu, H., Stadtmueller, L. M., & Ringer, S. P. (2002) · Cited by 2
Study of Influence of Heat Treatment on Cyclic Properties of L21HMF Cast Steel
Mroziński, S., & Golański, G. (2016) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-016-2136-y · Cited by 1
Models to predict creep behavior of HK-40 steel
Latorre, G. (2000) · CT&F - Ciencia Tecnología y Futuro · doi:10.29047/01225383.563 · Cited by 1
Comprehensive prediction of TIG weld geometry in P91 steel using fuzzy logic modeling
Sunhare, K. C., Patle, S. D., & Narang, H. K. (2025) · Welding International · doi:10.1080/09507116.2025.2530011 · Cited by 1
On the application of PINN-style physics-regularised neural networks to high-temperature creep rupture life prediction
Muránsky, O., Tran, M. N., & Payten, W. M. (2025) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2025.105691 · Cited by 1
Effect of borosilicate glass environment on creep behaviour of alloy 690 at temperatures over 800–1000 °C
Karri, M., Verma, A., Singh, J. B., & Singh, C. V. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11751-3 · Cited by 1
Estudio de las propiedades al creep en aceros termorresistentes
González, G. J., Moro, L. D., & Iurman, L. (2020) · AJEA · doi:10.33414/ajea.5.701.2020 · Cited by 1
A Novel Objective Method for Steel Degradation Rate Evaluation
Kasińska, J., Malinowski, P., Matusiewicz, P., Makieła, W., Barwicki, L. M., & Bolibruchová, D. (2024) · Materials · doi:10.3390/ma17246074 · Cited by 1
Root Cause Analysis of a Ruptured Waste Heat Recovery Boiler Tube of Grade SA210 A1
Bejugama, S., & Vemoori, R. (2025) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-025-02260-1 · Cited by 1
Effect of solution annealing on properties of used reformer centrifugally casted tubes prior to repair by welding
Mateša, B., Samarđžić, I., & Dunđer, M. (2014) · Hrčak Portal of scientific journals of Croatia (University Computing Centre) · Cited by 1
Hot Corrosion Failure of a 25 MW Land-Based Gas Turbine in a Marine Environment
Hendrix, D. E. (1998) · NACE CORROSION Conference · doi:10.5006/c1998-98203 · Cited by 1
An overview of failure mechanisms in high temperature components in power plants
Viswnathan, R. (2013) · Gruppo Italiano Frattura Digital Repository (Gruppo Italiano Frattura) · Cited by 1
Evaluación microestructural del acero inoxidable austenítico AISI 304 sometido a ensayos de Creep
Sáenz, L., Avendaño, Y., & Blanco, K. (2007) · Redalyc (Universidad Autónoma del Estado de México) · Cited by 1
The Use of Clad Piping Components for Refinery Applications
Dobis, J. D., & Chakravarti, B. (1997) · NACE CORROSION Conference · doi:10.5006/c1997-97510 · Cited by 1
Models for creep crack initiation and growth
Webster, G. A., & Ainsworth, R. A. (1994) · Springer eBooks · doi:10.1007/978-94-017-1771-7_5 · Cited by 1
Effect of temperature on the microstructure of 2.25Cr-1Mo steel during creep testing
Ahila, S., Radhakrishnan, V. M., & Iyer, S. R. (1993) · Journal of Materials Science Letters · doi:10.1007/bf00506343 · Cited by 1
Revealing systems of flaws in high-pressure reactors operating under dynamic pulse loading
Muravin, G. B., Adams, C. W., Muravin, B., & Lezvinsky, L. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.547516 · Cited by 1
A guide to condition assessment of gas turbine hot gas path components
Smillie, M. J., Cole, D. G., & Knowles, D. (2007) · Materials at High Temperatures · doi:10.1179/096034007x263578 · Cited by 1
Life assessment and inspection of a hot reheat turbine bifurcation
Payten, W. M., Charman, D., Chapman, A., Bashiri, K., & Bendeich, P. J. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2011.04.010 · Cited by 1
Failure Probability and Remaining Life Assessment of Reheater Tubes
Poursaeidi, E. (2013) · International Journal of Engineering · doi:10.5829/idosi.ije.2013.26.05b.11 · Cited by 1
THE LIFE ASSESSMENT OF STEAM TURBINE ROTORS FOR FOSSIL POWER PLANTS
Chang, S.-H., Song, G., Kim, B.-S., Hyun, J. S., & Ha, J. (2006) · International Journal of Modern Physics B · doi:10.1142/s0217979206041379 · Cited by 1
A Procedure to Generate Input Data of Cyclic Softening and Hardening for FEM Analysis from Constant Strain Amplitude Fatigue Tests in LCF Regime
Sarajärvi, U., & Cronvall, O. (2007) · Cited by 1
Structural Integrity in the Petrochemical Industry
May, I. L. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.00850-x · Cited by 1
Inspection System of Coating Layers by Thermal Behavior Effect
Yun, S.-U., Kim, J., Choi, S.-H., & Kim, H.-W. (2014) · Journal of the Korean Society of Manufacturing Process Engineers · doi:10.14775/ksmpe.2014.13.6.001 · Cited by 1
The Frontier of Technology Development in Remaining Life Assessment for High Temperature Components
OHTANI, T. (2013) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.62.157 · Cited by 1
NDT for Non-Nuclear Power Generation: Pressure Vessels, Piping, and Turbines
Birring, A. S. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.02079-8 · Cited by 1
Elevated-Temperature Life Assessment
Sreeranganathan, A., & Marriott, D. L. (2021) · ASM International eBooks · doi:10.31399/asm.hb.v11a.a0006807 · Cited by 1
Ultrasonic Testing in Nuclear Plants
Birring, A. S., & Williams, J. G. (2022) · Materials Evaluation · doi:10.32548/2022.me-04269 · Cited by 1
Evaluation of Post-Weld Heat-Treated 2.25Cr-1Mo Steel Joint Behaviors by Electromagnetic NDE Parameters
Roy, R., Murugaiyan, P., & Panda, A. K. (2024) · Journal of Superconductivity and Novel Magnetism · doi:10.1007/s10948-024-06807-5 · Cited by 1
Creep Damage and Creep-Fatigue Damage
MURAKAMI, S. (2011) · Solid mechanics and its applications · doi:10.1007/978-94-007-2666-6_8 · Cited by 1
Stress analysis and life assessment of a gas turbine blade
Mirzaei, M., & Karimi, R. (2013) · Gruppo Italiano Frattura Digital Repository (Gruppo Italiano Frattura) · Cited by 1
Life assessment for creep and fatigue of steam turbine components
Sakurai, S., & ISOBE, N. (2010) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-010-0038-5 · Cited by 1
Evaluation on an Internal Surface Crack in a Compound Tube
Ali, A. A., Purbolaksono, J., Khinani, A., Rashid, A., & Tarlochan, F. (2009) · Journal of Pressure Vessel Technology · doi:10.1115/1.4000346 · Cited by 1
Stress Relaxation Damage Analysis for High Temperature Bolting
Guo, J. Q., Sun, X., & Shi, H. C. (2012) · Advanced materials research · doi:10.4028/scientific5/amr.455-456.1429 · Cited by 1
Short Creep-Fatigue Crack Growth in an Advanced 9 %Cr Steel
Yan, W., Holdsworth, S. R., Kuehn, I., & Mazza, E. (2014) · Materials Performance and Characterization · doi:10.1520/mpc20130081 · Cited by 1
Evaluation of Materials Degradation Extent after their Long Term Exposition in Power Plants Equipments
Kraus, M., Mareš, V., & Bystrianský, J. (2014) · Materials science forum · doi:10.4028/www.scientific.net/msf.782.325 · Cited by 1
Qualification of Diesel Generator Exhaust Carbon Steel Piping to Intermittent Elevated Temperatures
Ratiu, M. D., & Mosidis, N. T. (1996) · Journal of Pressure Vessel Technology · doi:10.1115/1.2842161 · Cited by 1
The effect of carbon on the electronic structure of FeNi alloys with a stacking fault
Jasen, P., GONZALEZ, E. A., González, G., Moro, L., & Juan, A. (2008) · physica status solidi (b) · doi:10.1002/pssb.200844199 · Cited by 1
Influence of Start-up Management on the Residual Life of a Large Steam Turbine Shaft
Grosso, M., Federico, S., Sorce, A., Monti, M., Pascucci, F., & Razzoli, R. P. (2016) · HAL · Cited by 1
Development of Reclamation Technology for a Turbo-Shaft Engine
John, S. K., Mishra, R. K., & Shetty, B. P. (2017) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-017-0239-x · Cited by 1
Overcome the Challenge of High Temperature Corrosion
Elliott, P. (2011) · NACE CORROSION Conference · doi:10.5006/c2011-11147 · Cited by 1
Damage informatics concept for plant life-cycle management
FUJIYAMA, K. (2017) · Materials at High Temperatures · doi:10.1080/09603409.2017.1371532 · Cited by 1
Stress intensity factor of a penny-shaped crack with small-disturbed crack front line
Arai, M. (2018) · Mechanical Engineering Journal · doi:10.1299/mej.18-00244 · Cited by 1
Web-application for archiving of creep and long term strength data
Breslavsky, D., Бреславська, О. О., & Khoroshun, A. (2015) · Bulletin of the National Technical University «KhPI» Series Dynamics and Strength of Machines · doi:10.20998/2078-9130.2015.57.72569 · Cited by 1
ANALISA KERUSAKAN SUDU TURBIN UAP MATERIAL MARTENSITIC STAINLESS STEEL 410 PADA STAGE TERAKHIR
Cahyadi, M. (2020) · Jurnal Teknik Mesin Cakram · doi:10.32493/jtc.v2i2.4021 · Cited by 1
Reliability of Turbine Blades in Wet Steam Conditions
(2016) · International Journal of Science and Research (IJSR) · doi:10.21275/v5i3.nov162162 · Cited by 1
Aplicación de Thermo-Calc en las transformaciones de fase de un acero 2.25Cr-1Mo durante su tratamiento térmico y exposición isotérmica
López-Hirata, V. M., Saucedo‐Muñoz, M. L., Sigala-Garcia, D. A., Morales-Hernández, E. A., & Villegas-Cárdenas, J. D. (2022) · PÄDI Boletín Científico de Ciencias Básicas e Ingenierías del ICBI · doi:10.29057/icbi.v10iespecial7.9918 · Cited by 1
Remnant Creep Life Prediction in Ferritic Materials
Gooch, D. J. (2003) · Elsevier eBooks · doi:10.1016/b978-0-12-822944-6.00151-1 · Cited by 1

Authors: Viswanathan, R.
Affiliations: ASM International (US)
Corresponding author: Viswanathan, R.
Venue: ASM International eBooks
Publisher: ASM International
Published: 1989-12-01
DOI: 10.31399/asm.tb.dmlahtc.9781627083409
OpenAlex: W1972274821
Cited by: 751
References: 0
Citations by year: 2026: 12 · 2025: 9 · 2024: 13 · 2023: 13 · 2022: 20 · 2021: 24 · 2020: 24 · 2019: 32 · 2018: 29 · 2017: 22 · 2016: 38 · 2015: 30 · 2014: 37 · 2013: 38 · 2012: 26
FWCI: 15.39
Type: book
Language: en
Open access: closed
Locations: ASM International eBooks (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
Physical Sciences › Engineering › Mechanical Engineering › Mechanical Failure Analysis and Simulation
Keywords: creep, fatigue (material), fracture, embrittlement, corrosion, creep-fatigue interaction, thermal fatigue, weld defects, remaining service life prediction, boiler tubes, turbine blades, reactor pressure vessel, non-destructive testing, material property data

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Damage Mechanisms and Life Assessment of High-Temperature Components

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks