Cited by 751High Temperature Alloys and CreepFatigue and fracture mechanicsMechanical Failure Analysis and Simulation

The DOI matches its Crossref record.

Damage Mechanisms and Life Assessment of High-Temperature Components

Viswanathan, R.·1989·ASM International eBooks

DOI 10.31399/asm.tb.dmlahtc.9781627083409

Open this paper in CoChat — free account

Abstract

Damage Mechanisms and Life Assessment of High-Temperature Components deals with the underlying causes of high-temperature failures and their effect on component life and reliability. The first few chapters develop the theory necessary to understand and analyze high-temperature damage phenomena, including fracture, creep, and fatigue. Various forms of embrittlement and corrosion are also addressed as are creep-fatigue, thermal fatigue, and welding defects. The chapters that follow discuss the practical implications of these phenomena, explaining how to assess damage and estimate the remaining service life of boiler tubes, turbine blades, reactor vessels, nozzles, and other components. Life-assessment procedures draw on a knowledge of design, material behavior, and nondestructive inspection techniques, which are covered as well. The book makes extensive use of data plots, diagrams, and images and includes many worked-out examples and case histories. It also serves as a ready source of material property data. For information on the print version, ISBN 978-0-87170-358-3, follow this link.

Integrity signals

Registry

Crossref · 10.31399/asm.tb.dmlahtc.9781627083409

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Still being checked.

Sorted by citations

Items 601–700 of 749

Creep Behavior of Ferritic Steels after Heat-treated
Gabriel, G., Rene, M., Valentina, F. P., Gaston, G., & Moro, L. D. (2015) · Procedia Materials Science · doi:10.1016/j.mspro.2015.04.163 · Cited by 1
Deposit attack in tubes of power plant steam boilers
Balitskii, A. I., Рипей, И. В., & Chmiel, J. (2010) · Problemy Eksploatacji · Cited by 1
CREEP LIFE ASSESSMENT TECHNIQUES FOR PIPING
Viswanathan, R., & Gehl, S. M. (1992) · Elsevier eBooks · doi:10.1016/b978-0-08-037890-9.50138-1 · Cited by 1
Self-citation
An Approach to Predicting Long-Term Toughness, Strength, and Ductility of a Cr-Mo-V Steel Alloy Using Short-Term Tests
Davis, D. (1990) · Journal of Testing and Evaluation · doi:10.1520/jte12486j · Cited by 1
Characterization of Creep Resistance for Local Structure of Power Plant Weldment Using SP-Creep Technique
Baek, S.-S., Kwon, I. H., Lee, D. W., Yang, S. M., & Yu, H. (2006) · Key engineering materials · doi:10.4028/www.scientific.net/kem.326-328.643 · Cited by 1
Long Term Degradation of 0.5Cr-0.5Mo Plate Material in a Black Liquor Incineration Unit
Perdomo, J. J., Spry, T. D., & Bednarz, S. M. (2007) · NACE CORROSION Conference · doi:10.5006/c2007-07210 · Cited by 1
Crack growth behavior of ferritic steel for USC boilers in pressurized superheated steam
Inuil, M., Watanabe, Y., KONDO, T., Suzuki, K., & Kano, K. (2001) · Materials at High Temperatures · doi:10.1179/mht.2001.013 · Cited by 1
Effective metal temperature in creep life assessment
Westwood, H. J., & Leemans, D. V. (1993) · International Journal of Pressure Vessels and Piping · doi:10.1016/0308-0161(93)90068-5 · Cited by 1
Processes of deformation and fracture at high temperatures
Webster, G. A., & Ainsworth, R. A. (1994) · Springer eBooks · doi:10.1007/978-94-017-1771-7_2 · Cited by 1
Fadiga e comportamento tensão-deformação cíclico da liga de alumínio 7050-T7451
Hernández, K. V. F. (2016) · doi:10.26512/2016.04.d.20387 · Cited by 1
Creep and Fatigue at Elevated Temperatures. Nondestructive Evaluation of Creep Damage Using Leaky Surface Acoustic Wave Technique.
Yokono, Y., Nagano, Y., MUKAI, K., & IMANAKA, T. (2002) · JSME International Journal Series A · doi:10.1299/jsmea.45.39 · Cited by 1
Introduction
Webster, G. A., & Ainsworth, R. A. (1994) · Springer eBooks · doi:10.1007/978-94-017-1771-7_1 · Cited by 1
A Rational Approach for Modelling the Mechanical Behaviour of Materials Exhibiting Symmetry Relations
Magnenet, V., & Rahouadj, R. (2012) · doi:10.7546/jgsp-23-2011-29-57 · Cited by 1
Continuum damage
Penny, R. K., & Marriott, D. L. (1995) · Springer eBooks · doi:10.1007/978-94-011-0561-3_5 · Cited by 1
Structural Integrity in the Petrochemical Industry
May, I. L. (2003) · Elsevier eBooks · doi:10.1016/b978-0-12-822944-6.00118-3 · Cited by 1
Phenomenological Damage Parameters for TMF Life Prediction of DS CM 247 LC
Bayerlein, M., Hartnagel, W., & Sommer, C. (1996) · Springer eBooks · doi:10.1007/978-94-015-8636-8_12 · Cited by 1
Zmiany w mikrostrukturze staliwa GX12CrMoVNbN9 - 1 poddanego niskocyklowemu zmęczeniu
Golański, G., Kolan, C., Kępa, J., Kupczyk, J., & Mroziński, S. (2012) · Energetyka
Damage Analysis of Turbopump Turbine considering Creep-Fatigue effects
Lee, M., Jang, B.-W., Kim, J.-H., Jeong, E.-H., Jeon, S., Lee, S., & Park, J. (2010) · Journal of the Korean Society for Aviation and Aeronautics
Evaluation of the material’s damage in gas turbine rotors by instrumented spherical indentation
Nappini, D., Zonfrillo, G., Mastromatteo, F., & Giovannetti, I. (2014) · Frattura ed Integrità Strutturale · doi:10.3221/igf-esis.30.47
Niskocyklowa trwałość zmęczeniowa w temperaturze 550 °C wyżarzonego staliwa GX12CrMoVNbN9-1
Golański, G., & Mroziński, S. (2012) · HUTNIK - WIADOMOŚCI HUTNICZE
Creep-Fatigue Interactions in P91 Steel
Speicher, M., & Klenk, A. (2016)
THE CAUSES OF LOCAL HARDNESS INCREASING IN POWERPLANT ROTORS AND ITS MODIFICATION BY TEMPERING (TECHNICAL NOTE)
Poursaeidi, E., & Razavi, A. (2008) · International Journal of Engineering, Transactions B: Applications
CRACK SIMULATION AND LIFE ASSESSMENT OF GAS TURBINE NOZZLES
FUJIYAMA, K., YOSHIOKA, Y., Okabe, N., & Kimura, K. (1992) · Elsevier eBooks · doi:10.1016/b978-0-08-037890-9.50131-9
Creep ductility evaluation of low alloy steels used for steam turbine components
Singh, K., & Kamaraj, M. (2010) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-010-0053-6
Effects of Thermal Aging on Ductile-to-Brittle Transition Temperature Behavior of Welded A516 Steel
Khattak, M. A., Khan, M., & Tamin, M. N. (2011) · Key engineering materials · doi:10.4028/www.scientific.net/kem.462-463.1379
Design, synthesis and characterisation of interfaces in engineering materials
Ringer, S. P. (2001) · Ionics · doi:10.1007/bf02373559
Creep Degradation of Thermally Exposed IN738C Superalloy
Aghaie-Khafri, M., & Farahany, S. (2009) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.3019056
Analysis of Degradation Mechanism for Single Crystal Blade and Vane in Gas Turbine
Song, K. S., Kim, D.-S., Lee, H.-S., & Yoo, K.-B. (2011) · Transactions of the Korean Society of Mechanical Engineers A · doi:10.3795/ksme-a.2011.35.5.549
Structural Integrity of a Standpipe Component in a Petrochemical Catalytic Cracking Unit: Part 1—Assessment of Creep Rupture Properties
Bueno, L. D. O., Marino, L., Serra, F. A. S., & Gazini, F. T. (2000) · Journal of Engineering Materials and Technology · doi:10.1115/1.482797
Previsão de vida em tubos de caldeiras com base na medição da espessura da camada de óxido por ultrassom
Cardoso, B. R., Comeli, F. W., de Santana, R. M., & Furtado, H. C. (2011) · Matéria (Rio de Janeiro) · doi:10.1590/s1517-70762011000400003
Fatigue Resistance of GX12CrMoVNbN9-1 Cast Steel after Ageing Process
Mroziński, S., Golański, G., & Zielińska–Lipiec, A. (2014) · Materials Science · doi:10.5755/j01.ms.20.4.6077
Changes in Microstructure of GX12CrMoVNbn9-1 Cast Steel after Low Cycle Fatigue
Golański, G., Kolan, C., & Kępa, J. (2013) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.197.47
Processing and Heat Treatment Effects on an Al2O3/Ni3Al Composite
Brennan, P. C., Kao, W. H., & Yang, J. ‐. (1994) · Materials and Manufacturing Processes · doi:10.1080/10426919408934904
Thermal diffusivity measurement of 2.25Cr–1Mo steel with internal friction
Liu, X., Shiwa, M., Sawada, K., Yamawaki, H., & Watanabe, M. (2010) · Materials Letters · doi:10.1016/j.matlet.2010.03.001
Caracterización mecánica de un acero ferrítico/martensítico de activación reducida de producción española
Rodríguez, D., & Serrano, M. (2012) · Revista de Metalurgia · doi:10.3989/revmetalm.1167
On the Estimation of Oxide Scale Growth in T22 Superheater and Reheater Tubes
Bian, C. X., Zhou, K. Y., & Xu, J. Q. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.516-517.364
Oxide thickness measurements: a suitable tool for remaining life evaluation in power plants
Cardoso, B. R., Comeli, F. W., de Santana, R. M., Furtado, H. C., & de Almeida, L. H. (2014) · International Journal of Microstructure and Materials Properties · doi:10.1504/ijmmp.2014.066910
Influencia de la composición y tratamiento térmico sobre el comportamiento a fluencia de aceros ferrítico-martensíticos del tipo 9Cr1MoVNb utilizados en calderas supercríticas
Gutiérrez‐Urrutia, I., de Saiz-Solabarría, S. G., & Juán, J. S. (2000) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.3989/cyv.2000.v39.i3.844
Power Plant Remaining Life Evaluation
Furtado, H. C., Santos, F., Cardoso, B. R., Matt, C. F. T., & de Almeida, L. H. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.588.232
Stress Rupture Ductility Diagram. A Diagnostic Tool.
Chaudhuri, S., Roy, N., & Ghosh, R. N. (2000) · ISIJ International · doi:10.2355/isijinternational.40.207
Microstructural Aspects of Low Cycle Fatigue of Aged GX12CrMoVNbN9-1 Cast Steel
Mroziński, S., Golański, G., & Werner, K. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.592-593.708
Comportamento e mecanismos de falha à fluência em aços P91 e juntas soldadas
Cardoso, M. D. (2009) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Computation Tool for Rotor's Life Consumption in Steam Turbines According to Industrial Specifications
Lucifredi, A., Poldi, M. E., Silvestri, P., & Foglino, E. (2005) · Key engineering materials · doi:10.4028/www.scientific.net/kem.293-294.269
Analiza pełzania elementów turbin parowych za pomocą modelu charakterystycznego odkształcenia pełzania
Banaszkiewicz, M. (2007) · Prace Naukowe Politechniki Warszawskiej. Konferencje
New method of grain boundary extraction by directional optimal filtering: applying to estimate creep in metals
Journaux, S., Gouton, P., & Thauvin, G. (2002) · Optical Engineering · doi:10.1117/1.1480425
Expert System for Life Assessment and Maintenance of Steam Turbine Components
Murakami, I., FUJIYAMA, K., & Kimura, K. (1992) · Elsevier eBooks · doi:10.1016/b978-0-08-037890-9.50142-3
Recovery of Material Properties in Service-Degraded Gas Turbine Blades
Itô, A., Kagiya, Y., Watanabe, H., Takagi, H., Saito, D., Yoshioka, Y., Ito, H., & Ishii, J. (2003)
Gas Turbine Nozzle Life Assesment due to Thermal Fatigue
Mazur, Z., ́ndez, E. B. P. ́.-H., & García-Illescas, R. (2011) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2011-45247
Characterization of the Internal Friction Properties of 2.25Cr-1Mo Steel
Liu, X., Sawada, K., Yamawaki, H., Watanabe, M., Yin, F., & Shiwa, M. (2010) · Journal of the Japan Institute of Metals and Materials · doi:10.2320/jinstmet.74.227
A techno-economic probabilistic approach to superheater lifetime determination
Jaeger, M., Ben-Haim, H., Tzidony, D., Dumai, A., & Itai, T. (2006) · Journal of Energy in Southern Africa · doi:10.17159/2413-3051/2006/v17i1a3295
Application of Small Punch Test to Evaluate Tensile Properties of SA213T22 Grade Boiler Steel
Rao, M. (2015) · Materials science forum · doi:10.4028/www.scientific.net/msf.830-831.191
Glossary of Boiler Tube Microstructures and its Use to Verify Oxide Thickness Temperature Estimations
Noble, C. A. (2011) · NACE CORROSION Conference · doi:10.5006/c2011-11392
Life assessment of welded joints operating within creep range
Pramanik, M. A. (2022) · UNSWorks (University of New South Wales, Sydney, Australia) · doi:10.26190/unsworks/2436
Evaluation of Creep Crack Growth Failure Probability for High Temperature Pressurized Components Using Monte Carlo Simulation
Lee, J. S., & Yoon, K. B. (2006) · Journal of the Korean Society of Safety
Temperature Measurement and Lifetime Prediction of a High-Pressure Turbine Rotor
Sugita, Y., Shinohara, N., & Sugiyama, K. (2001) · Solid mechanics and its applications · doi:10.1007/978-94-015-9628-2_41
ANALISA KERUSAKAN SUPERHEATER TUBE PADA BOILER 31F-28 DI PT BADAK NGL BONTANG KALTIM
Permana, R. H. (2014)
Creep Life Prediction
Viswanathan, R. (2001) · Elsevier eBooks · doi:10.1016/b0-08-043152-6/00322-3
Self-citation
Nanostructured Y2O3plasma coating for high temperature oxidation protection
Ghosh, D., Roy, H., & Mitra, S. K. (2015) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2015.1011366
Creep Life Estimation of Service Exposed Alloy 625 Ammonia Cracker Tubes
Mathew, M. D., Rao, K. B. S., Mannan, S. L., Paknikar, K., & Singh, R. K. (1997) · International Symposium on Superalloys 718, 625, 706 and Various Derivatives · doi:10.7449/1997/superalloys_1997_805_812
Design for performance—a predictive framework for life-cycle management
Woodford, D. A. (1990) · JOM · doi:10.1007/bf03220462
Microstructural and Round-Robin Non-Destructive Evaluations for Creep Damage in Cr-Mo-V Steel
OHTANI, T., Yin, F., Kobayashi, S., Kamada, Y., Kurosaki, K., & Yamanaka, S. (2011) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.60.131
Remaining Life Assessment of a 37 Year Old Catalytic Reforming Reactor
Singh, A. K., Bagdasarian, A. J., & Malhotra, V. K. (1994) · NACE CORROSION Conference · doi:10.5006/c1994-94520
Remaining Life Assessment of Service Exposed Reheater and
Tiwari, Y. N., Chaudhuri, S., Sivaprasad, S., Das, G., & Kumar, P. (2002)
UNIVERSITA' DEGLI STUDI DI PADOVA FACOLTA' DI INGEGNERIA
Bagno, A. (2012)
Risk-Based Metallurgical Design
Solari, M. (2003) · CRC Press eBooks · doi:10.1201/9780203913307.ch2
The Behaviour of Defects in Welds at High Temperature
Smith, D. J. (1996) · Springer eBooks · doi:10.1007/978-94-009-1714-9_14
Creep and Creep-Fatigue Crack Growth of High Strength Steels
Webster, G. A. (1996) · Springer eBooks · doi:10.1007/978-94-009-1714-9_9
Nondestructive Evaluation of Temper Embrittlement of Cr-Mo-V Cast Steels by Electrochemical Method Using Calcium Nitrate Solution
Watanabe, Y. X., & Shoji, T. (1991) · 鐵と鋼 : 日本鐡鋼協會々誌 · doi:10.2355/tetsutohagane1955.77.4_566
Water quench thermal fatigue analysis of grade P22 and grade P91 steels
Appling, W. C. (2015) · W. S. Hoole Special Collections Library Manuscript Collections
Influence of Interparticle-spacing on Creep Rate in a 2.25Cr-1Mo Steel
Sumida, T., Ikuno, T., & Saburi, T. (1996) · 鐵と鋼 : 日本鐡鋼協會々誌 · doi:10.2355/tetsutohagane1955.82.1_92
Metalurgia e materiais
Moreto, J. A. (2011)
Impact of Analytical Electron Microscopy in Advancing Materials Technology in the Refining and Petrochemical Industry
Ayer, R. (2016) · Microscopy and Microanalysis · doi:10.1017/s1431927616007017
Web tools for long term strength data processing
Breslavsky, D., Бреславська, О. О., & Kozlyuk, A. (2016) · Bulletin of the National Technical University «KhPI» Series Dynamics and Strength of Machines · doi:10.20998/2078-9130.2016.46.88053
LIFE ASSESSMENT FOR HIGH TEMPERATURE COMPONENTS - TECHNIQUES AND MODELS
Kumar, A. (1997) · Elsevier eBooks · doi:10.1016/b978-0-08-042820-8.50013-3
Carbide Precipitation in a Low Alloy Ferritic Steel
Saucedo‐Muñoz, M. L., Gómez-Martínez, R., Ortiz‐Mariscal, A., López-Hirata, V. M., Villegas-Cárdenas, J. D., & González-Velázquez, J. L. (2017) · The minerals, metals & materials series · doi:10.1007/978-3-319-51493-2_76
Accelerated Corrosion of UNS S30409 (304H SS) in RFCC Regenerators Involving High Temperature Eutectic Molten Salts
Nair, J. R., Ghafri, A. A., Abri, N. A., & Mawali, F. A. (2017) · NACE CORROSION Conference · doi:10.5006/c2017-08915
Review of Materials Property Relationships for Use in Computerized Life Assessment
Jaske, C. (1995) · doi:10.1520/stp15414s
Life Assessments of Steam Chests and Valve Casings at Four Fossil Fuel Thermal Power Units
Roll, J. D., Jenks, A. R., Gorman, J. A., & White, G. A. (2017) · NACE CORROSION Conference · doi:10.5006/c2017-09486
Stress Analysis for Integrity Assessment of High-Energy Hot Reheat Pipe Bends of 210 MW Coal-Fired Unit
Daga, R., & Samal, M. K. (2017) · Springer eBooks · doi:10.1007/978-981-10-7197-3_31
Effect of Precipitation on Creep Properties of Ferritic Steels
Saucedo‐Muñoz, M. L., Ortiz‐Mariscal, A., Komazaki, S.-I., & López-Hirata, V. M. (2018) · The minerals, metals & materials series · doi:10.1007/978-3-319-72526-0_78
Creep Relaxation of Residual Stresses in the Heat Affected Zone of Type 316H Austenitic Stainless Steel Weldments
Chen, B., Flewitt, P. E. J., & Smith, D. J. (2010) · Science and Technology Facilities Council
On the fracture behavior of ductile polymer films : notch quality, essential work of fracture, J-integral, and crack tip opening displacement
Albiter, N. L. (2018) · doi:10.5821/dissertation-2117-117641
Study of the influence of loading history on the residual life of the devices of thermoelectric plants to optimize the management of energetic conversion system
Pastor, M., & Curial, A. (2010) · RECERCAT (Consorci de Serveis Universitaris de Catalunya)
Miniature creep tests using plate specimens bonded by electron beam welding
Kobayashi, K., Aoki, H., Kawashima, T., Takemoto, M., Takayama, Y., & YAMAZAKI, Y. (2018) · Ubiquity Proceedings · doi:10.5334/uproc.30
Optimization of strength and toughness on the effect of the weldable high strength steels (hss) used in offshore structures
Atta-Agyemang, S.-A. (2013) · Doria (University of Helsinki)
INFLUENCIA DE LOS ALEANTES Y DEL ATAQUE POR HIDRÓGENO SOBRE LAS PROPIEDADES MECÁNICAS DE ACEROS FERRÍTICOS TERMO RESISTENTES
Moro, L., Saravia, D. R., Lombardich, J., Saggio, M., Blanco, J., & Blanca, B. (2003)
Accelerated Creep Life Assessment of In-Service Power Plant Components
Aldajah, S. H., Kabir, M. M., & Al-Haik, M. Y. (2019) · MATEC Web of Conferences · doi:10.1051/matecconf/201929303001
Long term integrity for space station power systems
Leckie, F. A., & Marriott, D. L. (1991) · NASA Technical Reports Server (NASA)
Failure Analysis of Thermally Stressed Pipelines of Power Plants Operating in the North And Arctic
Yakovleva, S. P., & Николаевна, М. С. (2019) · International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon) · doi:10.1109/fareastcon.2019.8934079
Estudio de la interacción creep – fatiga en aceros ferríticos
Staffa, A., Moro, L. D., & Iurman, L. (2020) · AJEA · doi:10.33414/ajea.5.708.2020
Creep Crack Growth Testing
(2000) · ASM International eBooks · doi:10.31399/asm.hb.v08.a0003307
Metal degradation of thermally loaded elements of power plants during operation in the North
Yakovleva, S. P., Николаевна, М. С., & Ptitsyna, A. V. (2020) · Procedia Structural Integrity · doi:10.1016/j.prostr.2020.12.031
Evaluación del comportamiento del acero 1,25Cr0,5Mo en condiciones de fluencia lenta
Villas, U. C. “. A. D. L., Fernández-Fuentes, R., Cruz-Crespo, A., Villas, U. C. “. A. D. L., Scotti, A., & de Alcântara, N. G. (2021) · Revista Tecnica De La Facultad De Ingenieria Universidad Del Zulia · doi:10.22209/rt.v44n2a03
Characterization of fractured section of modified HP-40 pipe in ammonia primary reformer
Fauzi, A. R., Anawati, A., & Wibowo, T. (2021) · AIP conference proceedings · doi:10.1063/5.0059988
Post-mortem study of fractured surface of Cr12 blade used in a steam turbine
Sari, N. M., Anawati, A., & Wibowo, T. (2021) · AIP conference proceedings · doi:10.1063/5.0059985
To travel hopefully… in search of the instant creep test
Brear, J. M. (2021) · Materials at High Temperatures · doi:10.1080/09603409.2021.1970298
Use of expert system software for life monitoring of power plant components
Sahu, J. K., Jayaraman, B., Sivaprasad, S., Ray, A. K., Tarafder, S., Chaudhuri, S., & Ghosh, R. N. (2008)
Fatigue Crack Growth
(2006) · Kluwer Academic Publishers eBooks · doi:10.1007/1-4020-7861-7_9
Introduction
Naumenko, K., & Altenbach, H. (2016) · Advanced structured materials · doi:10.1007/978-3-319-31629-1_1
Test Techniques and Test Systems
Sinha, N. K., & Sinha, S. (2022) · Wiley eBooks · doi:10.1002/9781119420507.ch4

Authors: Viswanathan, R.
Affiliations: ASM International (US)
Corresponding author: Viswanathan, R.
Venue: ASM International eBooks
Publisher: ASM International
Published: 1989-12-01
DOI: 10.31399/asm.tb.dmlahtc.9781627083409
OpenAlex: W1972274821
Cited by: 751
References: 0
Citations by year: 2026: 12 · 2025: 9 · 2024: 13 · 2023: 13 · 2022: 20 · 2021: 24 · 2020: 24 · 2019: 32 · 2018: 29 · 2017: 22 · 2016: 38 · 2015: 30 · 2014: 37 · 2013: 38 · 2012: 26
FWCI: 15.39
Type: book
Language: en
Open access: closed
Locations: ASM International eBooks (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
Physical Sciences › Engineering › Mechanical Engineering › Mechanical Failure Analysis and Simulation
Keywords: creep, fatigue (material), fracture, embrittlement, corrosion, creep-fatigue interaction, thermal fatigue, weld defects, remaining service life prediction, boiler tubes, turbine blades, reactor pressure vessel, non-destructive testing, material property data

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Damage Mechanisms and Life Assessment of High-Temperature Components

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks