Cited by 751High Temperature Alloys and CreepFatigue and fracture mechanicsMechanical Failure Analysis and Simulation

The DOI matches its Crossref record.

Damage Mechanisms and Life Assessment of High-Temperature Components

Viswanathan, R.·1989·ASM International eBooks

DOI 10.31399/asm.tb.dmlahtc.9781627083409

Open this paper in CoChat — free account

Abstract

Damage Mechanisms and Life Assessment of High-Temperature Components deals with the underlying causes of high-temperature failures and their effect on component life and reliability. The first few chapters develop the theory necessary to understand and analyze high-temperature damage phenomena, including fracture, creep, and fatigue. Various forms of embrittlement and corrosion are also addressed as are creep-fatigue, thermal fatigue, and welding defects. The chapters that follow discuss the practical implications of these phenomena, explaining how to assess damage and estimate the remaining service life of boiler tubes, turbine blades, reactor vessels, nozzles, and other components. Life-assessment procedures draw on a knowledge of design, material behavior, and nondestructive inspection techniques, which are covered as well. The book makes extensive use of data plots, diagrams, and images and includes many worked-out examples and case histories. It also serves as a ready source of material property data. For information on the print version, ISBN 978-0-87170-358-3, follow this link.

Integrity signals

Registry

Crossref · 10.31399/asm.tb.dmlahtc.9781627083409

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Still being checked.

Sorted by citations

Items 401–500 of 749

Hot tensile and creep rupture data extrapolation on 2.25Cr-1Mo steel using the CDM Penny-Kachanov methodology
Sobrinho, J. F. D. R., & Bueno, L. D. O. (2014) · Materials Research · doi:10.1590/s1516-14392014005000007 · Cited by 5
Condition Assessment Study of A-286 Alloy Gas Turbine Wheel
Shejale, G. M., Garg, R., Subrahmanyam, G. V., & Schnell, A. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0154-6 · Cited by 5
Toughness of 2,25Cr-1Mo steel and weld metal
Acarer, M., Arıcı, G., Acar, F. K., Keskinkilic, S., & Kabakcı, F. (2017) · AIP conference proceedings · doi:10.1063/1.4999898 · Cited by 5
A case study investigation into the effects of spatially dependent convection coefficients on the fatigue response of a power plant header component
Rouse, J. P., Zacharzewski, P., Hyde, C. J., Jefferson-Loveday, R. J., Morris, A., & Kyaw, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.03.032 · Cited by 5
Fully plastic J-integral and C* equations for small punch test specimen with a surface crack
Nguyen, T. T., & Yoon, K. B. (2020) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2020.104214 · Cited by 5
Predicting Creep and Creep/Fatigue Crack Initiation and Growth for Virtual Testing and Life Assessment of Components
Nikbin, K. M. (2009) · Springer eBooks · doi:10.1007/978-0-387-95924-5_5 · Cited by 5
Ensayo de termofluencia de indentación en un acero inoxidable austenítico 316
Saucedo‐Muñoz, M. L., Komazaki, S.-I., Hashida, T., & López-Hirata, V. M. (2015) · Revista de Metalurgia · doi:10.3989/revmetalm.034 · Cited by 5
Evaluation of stress intensity factors for multiple surface cracks in bi-material tubes
Purbolaksono, J., Ali, A. A., Khinani, A., & Rashid, A. (2009) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2009.05.004 · Cited by 5
High-Temperature Inelastic Behavior of the Austenitic Steel AISI Type 316
Altenbach, H., & Gorash, Y. (2013) · Advanced structured materials · doi:10.1007/978-3-642-35167-9_3 · Cited by 5
Failure Analysis towards Reliable Performance of Aero-Engines
Jayakumar, T., Muralidharan, N. G., Raghu, N., Kasiviswanathan, K. V., & Raj, B. (1999) · Defence Science Journal · doi:10.14429/dsj.49.3843 · Cited by 5
High‐temperature testing in a Charpy impact pendulum using in‐situ Joule heating of the specimen
Ferreirós, P. A., Alonso, P. R., Gargano, P., & Rubiolo, G. H. (2017) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12761 · Cited by 5
Failure analysis of the water-wall tube in once through Benson boiler
Sethi, A. K., & Vikash, O. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.12.143 · Cited by 5
Acoustic Damping Characterization and Microstructure Evolution during Creep of a High Temperature Bolting Steel
OHTANI, T., Ogi, H., & Hirao, M. (2006) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.55.416 · Cited by 5
Modelling the creep behaviour of a reheat header longitudinal weld
Law, M., Payten, W. M., & Small, R. (2000) · International Journal of Pressure Vessels and Piping · doi:10.1016/s0308-0161(99)00089-7 · Cited by 5
Key achievements in elementary R&D on water-cooled solid breeder blanket for ITER test blanket module in JAERI
Suzuki, S., Enoeda, M., Hatano, T., Hirose, T., Hayashi, K., Tanigawa, H., Ochiai, K., Nishitani, T., Tobita, K., & Akiba, M. (2006) · Nuclear Fusion · doi:10.1088/0029-5515/46/2/012 · Cited by 5
Failure of a Pendent Reheater Tube in a 110 MW Thermal Power Plant
Saha, A., Roy, H., & Shukla, A. K. (2013) · High Temperature Materials and Processes · doi:10.1515/htmp-2013-0052 · Cited by 5
NDE OF CREEP DAMAGE AT SEAM WELDS VIA MAE
AUGUSTYNIAK, B., Chmielewski, M., & Sablik, M. J. (2001) · Nondestructive Testing And Evaluation · doi:10.1080/10589750108953120 · Cited by 5
Damage Mechanics Considerations for Life Extension of High-Temperature Components
Ling, X., Tu, S., & Gong, J. (1999) · Journal of Pressure Vessel Technology · doi:10.1115/1.556167 · Cited by 5
Creep damage – industry needs and future research and development
Viswanathan, R., & Tilley, R. M. (2008) · Elsevier eBooks · doi:10.1533/9781845694012.3.637 · Cited by 5
Self-citation
Kriech‐Ermüdungsverhalten der Titanlegierung IMI 834 bei 600 °C
Nowack, H., & Kordisch, T. (1998) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.19980290413 · Cited by 5
Effects of Loading Rate on Creep Crack Growth During the Succeeding Load-Hold Period Under Trapezoidal Fatigue Waveshapes
Yoon, K. B., Baek, U., & Suh, C. (1997) · doi:10.1520/stp16320s · Cited by 5
Online Creep and Fatigue Monitoring in Power Plants
Pesonen, V. (2014) · Tampere University Institutional Repository (Tampere University) · Cited by 5
Life-prediction technology for aging plants and structural components
Liaw, P. K. (1992) · JOM · doi:10.1007/bf03222768 · Cited by 5
Measuring mechanical properties using digital image correlation: extracting tensile and fracture properties from a single sample.
Huchzermeyer, R. L. (2017) · SUNScholar (Stellenbosch University) · Cited by 5
Fatigue Behavior of SA533-B1 Steels
Huang, J.-Y., Li, R.-Z., Chien, K. F., Kuo, R. C., Liaw, P. K., Yang, B., & Huang, J.-G. (2002) · doi:10.1520/stp10586s · Cited by 5
Prediction of Remaining Useful Life for Used Gas Turbine Blades
Baheta, A. T., Johanis, B. B. B., & Jasmani, M. S. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.774-776.370 · Cited by 4
Creep, fatigue and microstructural degradation in gas turbine superalloys
Auerkari, P. (2011) · Elsevier eBooks · doi:10.1533/9780857093806.3.307 · Cited by 4
Effect of Microstructure upon the Wear Properties of 2.25Cr-1Mo Steel
Jha, B. B., Mishra, B. K., Sahoo, T. K., Mukherjee, P. S., & Ojha, S. N. (2010) · Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forum · doi:10.4028/www.scientific.net/ddf.303-304.85 · Cited by 4
Development, reliability evaluation and service experiences of gas turbine blade life regeneration technology
Yoshioka, Y., Saito, D., Takaku, R., Itou, S., Sato, I., Ishibashi, K., & Sakai, Y. (2010) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-010-0039-4 · Cited by 4
Creep Life Prediction of 0.5%Cr-0.5%Mo-0.25%V Thick-Walled Cylinder Using New Multiaxial Approach
Ng, L. H., & Zarrabi, K. (2005) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2005-82450 · Cited by 4
Prediction of the Remaining Service Life of Superheater and Reheater Tubes in Coal-Biomass Fired Power Plants
Asgaryan, M., Simms, N. J., & Wu, S. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.856.343 · Cited by 4
Fatigue Behavior of Nickel Based Super Alloy 718 in a Hot Corrosive Environment
Prakash, R. V., Sampath, D., Ramakanth, J. V., Paulose, N., Narendrababu, S. N., & Mannan, S. L. (2014) · Materials Performance and Characterization · doi:10.1520/mpc20130039 · Cited by 4
Enhancement of Creep Life by Niobium Carbide in Fe-30Cr-3Al Ferritic Heat-Resistant Steel
Sung, H. J., & Kim, S.-J. (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4691-3 · Cited by 4
Characterisation of SA210 Grade A1 virgin and failed boiler steel tube materials
Vigraman, T., Venkatesh, R., & Pradeep, N. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.06.554 · Cited by 4
Failure of Boilers and Related Equipment
Haribhakti, P., & Joshi, P. B. (2021) · ASM International eBooks · doi:10.31399/asm.hb.v11a.a0006825 · Cited by 4
Long-Term Creep Properties of Hastelloy XR in Simulated High-Temperature Gas-Cooled Reactor Helium
Kurata, Y., Ogawa, Y., Suzuki, T., Shindo, M., Nakajima, H., & KONDO, T. (1995) · Journal of Nuclear Science and Technology · doi:10.1080/18811248.1995.9731825 · Cited by 4
The role of strength distributions for premature creep failure
He, J., Sandström, R., Zhang, J., & Qin, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.06.162 · Cited by 4
Microstructure-Based Creep Life Assessment of 1CrMoV Turbine Rotor Steels After Long-Term Service
Nyembe, H. S., van der Meer, P., Knutsen, R. D., & Westraadt, J. E. (2024) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-024-01858-1 · Cited by 4
Nondestructive evaluation of flow properties in thermally aged Cr–Mo–V steel using instrumented indentation tests
Kim, J.-Y., Lee, J.-J., Lee, K.-W., & Kwon, D.-S. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3480-1 · Cited by 4
Symmetry analysis and invariance relations in creep
Magnenet, V., Rahouadj, R., & Ganghoffer, J. (2013) · Mathematics and Mechanics of Solids · doi:10.1177/1081286513498331 · Cited by 4
Role of internal oxidation and iron penta carbonyl formation on creep life of 9Cr-1Mo steel
Jena, P. S. M., Kumar, R., Roy, P. K., & Sahu, J. K. (2017) · Materials at High Temperatures · doi:10.1080/09603409.2017.1308046 · Cited by 4
Investigating creep behavior of Ni–Cr–W alloy pressurized tube at 950 °C by using in-situ creep testing system
Zhong, Y. J., Lan, K.-C., Lee, H., Zhou, B., Wang, Y., Tsang, D. K. L., & Stubbins, J. F. (2019) · Nuclear Engineering and Technology · doi:10.1016/j.net.2019.12.024 · Cited by 4
Experimental Modal Analysis of Distinguishing Microstructural Variations in Carbon Steel SA516 by Applied Heat Treatments, Natural Frequencies, and Damping Coefficients
Ahmadpar, M., Hoseinzadeh, S., Nakhaei, F., & Memon, S. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-06125-0 · Cited by 4
Evaluation of microstructure and mechanical properties of a steam turbine casing after long-term service
Cwiek, J. (2011) · Journal of Achievements of Materials and Manufacturing Engineering · Cited by 4
Damage evaluation of fossil fuelled power plant boiler tubes through magnetic Barkhausen technique
Roy, R. K., Das, S. K., Srivastava, A., Panda, A. K., & Mitra, A. (2014) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2014.05.011 · Cited by 4
Noncontact nonlinear resonant ultrasound spectroscopy to evaluate creep damage in an austenitic stainless steel
OHTANI, T., KUSANAGI, Y., & Ishii, Y. (2013) · AIP conference proceedings · doi:10.1063/1.4789183 · Cited by 4
Approach to residual life assessment of large steam turbine components
Caccialupi, A., Crudeli, R., FAZIO, G., Porro, F., Santoro, M., & Zannoni, M. (1994) · International Journal of Pressure Vessels and Piping · doi:10.1016/0308-0161(94)90158-9 · Cited by 4
Thermomechanical Transient Analysis and Conceptual Optimization of a First Stage Bucket
Campos‐Amezcua, A., Zdzislaw Mazur, C., & Gallegos-Muñoz, A. (2010) · Journal of Turbomachinery · doi:10.1115/1.4001367 · Cited by 4
Solar-thermal energy conversion and storage: Conductive heat transfer using bulk graphite
Sorrell, C. C., Palmer, T., Bowen, L. J., & Nakaruk, A. (2009) · International Conference on Applied Superconductivity and Electromagnetic Devices · doi:10.1109/asemd.2009.5306656 · Cited by 4
Designing a ruggedisation lab to characterise materials for harsh environments
Frazzette, N., Jethva, J., Mehta, K., Stapleton, J. J., & Randall, C. A. (2016) · Journal of Medical Engineering & Technology · doi:10.1080/03091902.2016.1213905 · Cited by 4
New Coatings for Protection against Corrosion in Fossil Fuel Combustion Environments
Easterly, F. B., Verstak, A., Baranovski, S., Belashchenko, V., & Shmyreva, T. P. (1997) · NACE CORROSION Conference · doi:10.5006/c1997-97141 · Cited by 4
Elevated-Temperature Properties of Stainless Steels
(1990) · ASM International eBooks · doi:10.31399/asm.hb.v01.a0001048 · Cited by 4
Finite element modeling of magnetoacoustic emission and of stress-induced magnetic effects at seam welds in steel pipes
Sablik, M. J., Weidner, C., & AUGUSTYNIAK, B. (2001) · Journal of Applied Physics · doi:10.1063/1.1355325 · Cited by 4
The Effect of Grain Boundary Cavities on the Tertiary Creep Behavior and Rupture Life of 1.25Cr-0.5Mo Steel Welds
Fujibayashi, S. (2004) · ISIJ International · doi:10.2355/isijinternational.44.1441 · Cited by 4
High Temperature Fatigue
Antolovich, S. D., & Pineau, A. (2013) · Wiley eBooks · doi:10.1002/9781118616789.ch1 · Cited by 4
Cavity Growth Simulation in 2.25Cr–1Mo Steel Under Creep-Fatigue Loading
Ogata, T. (2008) · Journal of Pressure Vessel Technology · doi:10.1115/1.2937735 · Cited by 4
Numerical simulation of weldment creep response
Segle, P. (2002) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 4
Creep-fatigue defect development and risk of brittle fracture in the ultrasupercritical steam turbine rotors
Banaszkiewicz, M., & Badur, J. (2023) · Materials at High Temperatures · doi:10.1080/09603409.2022.2160896 · Cited by 3
Thermal aging of Gr. 91 steel in supercritical thermal plant and its effect on structural integrity at elevated temperature
Won, M., Jeong, S.-H., Huh, N., Kim, W., & Lee, H.-Y. (2023) · Nuclear Engineering and Technology · doi:10.1016/j.net.2023.07.011 · Cited by 3
Delamination Behavior of Thermal Barrier Coatings under Thermo-Mechanical Fatigue
YOSHITAKE, S., Iio, T., FUNAO, A., SEKIHARA, M., Arikawa, H., & Ichikawa, K. (2009) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.58.759 · Cited by 3
Crack Growth Behavior of IN100 Alloy Using In-Situ Observational Methods under High Temperature Creep and Fatigue Conditions
Kobayashi, D., Toshimitsu, J. Y. A., Sugiura, R., & Fuji, A. (2010) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.m2010202 · Cited by 3
Small Punch Creep Test in a 316 Austenitic Stainless Steel
Saucedo‐Muñoz, M. L., Komazaki, K.-I., Ortiz‐Mariscal, A., & López-Hirata, V. M. (2016) · Springer eBooks · doi:10.1007/978-3-319-48210-1_63 · Cited by 3
Design and Structures of Aircraft Engines
Nagappa, R., Jeyaraman, S., & Kumar, C. K. (2016) · Indian Institute of Metals series · doi:10.1007/978-981-10-2143-5_14 · Cited by 3
Creep damage analysis of simulated-HAZ notched bar specimens of modified 9Cr-1Mo steel
Honda, T., Fukahori, T., IGARI, T., Chuman, Y., TOKIYOSHI, T., & Cocks, A. C. F. (2017) · Mechanical Engineering Journal · doi:10.1299/mej.16-00697 · Cited by 3
Influence of Oxidation on Estimation of Long-Term Creep Rupture Strength of 2.25Cr–1Mo Steel by Larson–Miller Method
Abe, F. (2019) · Journal of Pressure Vessel Technology · doi:10.1115/1.4044264 · Cited by 3
Hydrogen embrittlement failure of hot dip galvanised high tensile wires
Mukhopadhyay, N. K., Sridhar, G., Parida, N., Tarafder, S., & Ranganath, V. R. (2001) · Elsevier eBooks · doi:10.1016/b978-0-08-043959-4.50040-7 · Cited by 3
From as-cast to heat treated X-40 superalloy: Effect of cooling rate after partial solution treatment on microstructural evolutions and mechanical properties
Ghasemi, A., Kolagar, A. M., & Pouranvari, M. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.140891 · Cited by 3
Fish-mouth opening of an ammonia cracker tube of Alloy 625
Singh, J. B., Verma, A., Murty, T. N., Karri, M., Khan, S. A., & Keskar, N. (2022) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2022.106571 · Cited by 3
Enhancing Resistance to Corrosion, Erosion and Oxidation of Boiler Steels by Surface Modification Techniques
Pawla, V. K., Kumar, S., & Kumar, S. (2024) · Journal of Materials and Engineering · doi:10.61552/jme.2024.03.002 · Cited by 3
Life Assessment of 1 1/4 Cr-1/2 Mo Steel Catalytic Reformer Furnace Tubes Using the MPC Omega Method
Ibarra, S., & Konet, R. R. (1995) · Journal of Pressure Vessel Technology · doi:10.1115/1.2842084 · Cited by 3
Damage Informatics and Materials Engineering for Optimizing Operation and Maintenance of Power Plant Components
FUJIYAMA, K. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.00893-6 · Cited by 3
Experimental in-situ metallographic investigations of industrial hydrocarbon processed fired heater tubes
Subramanian, C. (2019) · Metallurgical Research & Technology · doi:10.1051/metal/2018062 · Cited by 3
Study on Creep Damage Assessment Method for Mod. 9Cr-1Mo Steel by Sampling Creep Testing with Thin Plate Specimen
Kanayama, H., HIYOSHI, N., Ogawa, F., Kawabata, M., Itoh, T., & Wakai, T. (2019) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.68.421 · Cited by 3
Creep in Heat-resistant Steels at Elevated Temperatures
Eisenträger, J., & Altenbach, H. (2019) · Advanced structured materials · doi:10.1007/978-3-030-30355-6_4 · Cited by 3
Experimental and numerical analyses of an U-bend tube made of an output inter-heater tube after exploitation
D.Pavkov, V., Bakić, G., MAKSIMOVIĆ, V. M., Petrović, A., Mitrović, N., & Mišković, Ž. (2020) · Hemijska industrija · doi:10.2298/hemind190905005p · Cited by 3
Remaining Life Assessment of Boiler Tubes
(2018) · ASM International eBooks · doi:10.31399/asm.tb.fibtca.t52430409 · Cited by 3
Elevated-Temperature Failures
(2013) · ASM International eBooks · doi:10.31399/asm.tb.uhcf3.t53630237 · Cited by 3
Stress Relaxation Cracking of Welded Joints in Thick Sections of a TP347 Stabilized Grade of Stainless Steel
van der Westhuizen, C. E. (2008) · NACE CORROSION Conference · doi:10.5006/c2008-08454 · Cited by 3
Analysis of Dissimilar Welds Exposed to High Temperature H2/H2S Conditions in a Hydrodesulfurizing (HDS) Unit
Penuela, L. E., Chirinos, J. G., & Dobis, J. D. (1999) · NACE CORROSION Conference · doi:10.5006/c1999-99383 · Cited by 3
Historical Overview of Improving Cleanliness of Rotor Steels for Electric Utility Applications
Viswanathan, R. (1997) · doi:10.1520/stp16608s · Cited by 3
Self-citation
A Serviceability Approach for Carbon Steel Piping to Intermittent High Temperatures
Ratiu, M. D., & Moisidis, N. T. (1996) · Journal of Pressure Vessel Technology · doi:10.1115/1.2842220 · Cited by 3
Investigation of probable cause of damage of steam drum of naphtha cracking furnace
Saha, A., Roy, H., Ray, S., Maiti, M., Chowdhury, K. K., Shukla, A. K., & Basu, J. (2008) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2008.09.018 · Cited by 3
Probabilistic fracture mechanics of nuclear structural components: consideration of transition from embedded crack to surface crack
YAGAWA, G., Kanto, Y., & Yoshimura, S. (1999) · Nuclear Engineering and Design · doi:10.1016/s0029-5493(99)00148-x · Cited by 3
Metallurgical Evaluation and Condition Assessment of FSX 414 Nozzle Segments in Gas Turbines by Metallographic Methods
Shejale, G. M. (2011) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4002682 · Cited by 3
Thermal shock behaviour in ferritic steels: laboratory tests and comparison with service conditions
Skelton, R. P. (2006) · Materials at High Temperatures · doi:10.1179/mht.2006.004 · Cited by 3
Measurement of creep damage in 2·25Cr–1Mo steel
Woodford, D. A., Steele, D. V., Hyder, M. J., & Kitagawa, M. (1992) · Materials Science and Technology · doi:10.1179/026708392790171035 · Cited by 3
Characterization of the Internal Friction Properties of 2.25Cr-1Mo Steel
Liu, X., Sawada, K., Yamawaki, H., Watanabe, M., Yin, F., & Shiwa, M. (2009) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.maw200909 · Cited by 3
Creep Life Forecasting of Weldment
Jelwan, J., Chowdhry, M., & Pearce, G. (2011) · Cited by 3
Effects of Prior Stress Relaxation on the Prediction of Creep Life Using Time and Strain Based Methods
Payten, W. M., Snowden, K. U., & Dean, D. (2013) · Journal of Pressure Vessel Technology · doi:10.1115/1.4023726 · Cited by 3
An Improved Evaluation of Creep Rupture Life by Strees Rupture Map Zoning
Maruyama, K. (1993) · 鐵と鋼 : 日本鐡鋼協會々誌 · doi:10.2355/tetsutohagane1955.79.2_219 · Cited by 3
Microstructural Investigation and Determining the Optimal Conditions for Nondestructive Testing of Inconel 738LC Superalloy Gas Turbine Blade
Rayatpour, M., & Lalegani, Z. (2021) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-021-01203-w · Cited by 3
Study of the influence of nanoparticles on the behavior of composite materials
Chaibi, N., Hemmouche, L., Trache, D., Benkhelil, H., & Hedimi, H. (2021) · Journal of the Indian Chemical Society · doi:10.1016/j.jics.2021.100151 · Cited by 3
In-situ Detection and Quantification of Oxide Scale Exfoliation in Stainless Steel Boiler Tubes by Magnetic Coercive Force (MCF) Measurement
Das, A. K., Mondal, A., Chand, S., & Chhabra, A. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-9093-8_14 · Cited by 3
A perspective on the Wilshire creep equations
Brear, J. M. (2022) · Strength Fracture and Complexity · doi:10.3233/sfc-228006 · Cited by 3
Creep and life assessment of engineering components in power plants and process industries
Chaudhuri, S. (2008) · Cited by 3
Cost modelling of coal power plant start-up in cyclical operation
Keatley, P. (2014) · Elsevier eBooks · doi:10.1533/9780857097323.2.358 · Cited by 3
Failure Analysis of Steel Superheater Tube Fractured in a Boiler of a Power Plant
Huda, Z. (2011) · Key engineering materials · doi:10.4028/www.scientific.net/kem.462-463.467 · Cited by 3
A Creep Rupture Time Model for Anisotropic Creep-Damage of Transversely-Isotropic Materials
Stewart, C. M., & Gordon, A. P. (2010) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2010-22532 · Cited by 3
Low Cycle Fatigue Life of Martensitic Cast Steel after Ageing
Golański, G., Mroziński, S., & Werner, K. (2012) · Materials science forum · doi:10.4028/www.scientific.net/msf.726.3 · Cited by 3
Life Assessment of Reformer Tubes from Strain Measurement
Thomas, C. W., Hill, T., & Anderson, T. (2011) · NACE CORROSION Conference · doi:10.5006/c2011-11155 · Cited by 3

Authors: Viswanathan, R.
Affiliations: ASM International (US)
Corresponding author: Viswanathan, R.
Venue: ASM International eBooks
Publisher: ASM International
Published: 1989-12-01
DOI: 10.31399/asm.tb.dmlahtc.9781627083409
OpenAlex: W1972274821
Cited by: 751
References: 0
Citations by year: 2026: 12 · 2025: 9 · 2024: 13 · 2023: 13 · 2022: 20 · 2021: 24 · 2020: 24 · 2019: 32 · 2018: 29 · 2017: 22 · 2016: 38 · 2015: 30 · 2014: 37 · 2013: 38 · 2012: 26
FWCI: 15.39
Type: book
Language: en
Open access: closed
Locations: ASM International eBooks (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
Physical Sciences › Engineering › Mechanical Engineering › Mechanical Failure Analysis and Simulation
Keywords: creep, fatigue (material), fracture, embrittlement, corrosion, creep-fatigue interaction, thermal fatigue, weld defects, remaining service life prediction, boiler tubes, turbine blades, reactor pressure vessel, non-destructive testing, material property data

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Damage Mechanisms and Life Assessment of High-Temperature Components

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks