CoChat

Scale formation mechanisms of martensitic steels in high CO2/H2O-containing gases simulating oxyfuel environments

Pirón Abellán, J., Olszewski, T., Penkalla, H.J., Meier, G.H., Singheiser, L., Quadakkers, W.J. · 2009 · Materials at High Temperatures

The DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.

Abstract

In oxyfuel power plants, metallic components will be exposed to service environments containing high amounts of CO2 and water vapour. Therefore, the oxidation behaviour of a number of martensitic 9–12%Cr steels in a model gas mixture containing 70% CO2–30% H2O was studied in the temperature range 550–700°C. The results were compared with the behaviour in air, Ar–CO2 and Ar–H2O. It was found that in the CO2- and/or H2O-rich gases, the mentioned steels tended to form iron-rich oxide scales with significantly higher growth rates than the Cr-rich surface scales formed during air exposure. The iron-rich scales were formed as a result of a decreased flux of chromium in the bulk alloy toward the surface because of enhanced internal oxidation of chromium in the H2O-containing gases and carbide formation in the CO2-rich gases. Additionally, the presence of water vapour in the exposure atmosphere led to buckling of the outer haematite layer, apparently as a result of compressive oxide growth stresses. The Fe-base oxide scales formed in CO2(–H2O)-rich gases appeared to be permeable to CO2 molecules resulting in substantial carburization of the steel.

Overview

Integrity signals

Registry

Crossref · 10.3184/096034009x438185

Cites

33 of 33 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 33 references

Research works printed but not linked: 7

  1. Jordal, K., Anheden, M., Yan, J. and Stromberg, L. (2004)Oxyfuel combustion for coal-fired power generation with CO2 capture—opportunities and challenges. Proc. 7th Int. Conf. on Greenhouse Gas Control Technologies (GHGT-7), Vancouver, Canada, September 5-9, 201–209.
  2. Ehlers R.J., 2001, The Institute of Materials, London, ISSN 1354-5116
  3. Pirón Abelian J., Inter I Mater. Res
  4. Galerie A., 2001, Mater. Sci. For, 231, 369
  5. 10.1016/j.corsci.2004.01.010 · DOI
  6. Armitt J., 1978, The spalling of steam-grown oxide from superheater and reheater tube steels
  7. Thiele M., 1997, VGB Kraftwerks-technik, 77, 135

Cited by

See all 100

Metadata

Authors
Pirón Abellán, J., Olszewski, T., Penkalla, H. J., Meier, G. H., Singheiser, L., & Quadakkers, W. J.
Affiliations
  • Forschungszentrum Jülich (DE)
  • University of Pittsburgh (US)
Venue
Materials at High Temperatures
Published
2009-03
Volume
26
Issue
1
Pages
63-72
ISSN
  • 0960-3409 (ISSN-L)
  • 1878-6413
OpenAlex
W2060973134
Cited by
100
References
34
Citations by year
2026: 1 · 2025: 2 · 2024: 3 · 2023: 3 · 2022: 3 · 2021: 5 · 2020: 7 · 2019: 9 · 2018: 8 · 2017: 11 · 2016: 6 · 2015: 7 · 2014: 8 · 2013: 12 · 2012: 3
FWCI
9.71
Type
journal article
Language
en
Open access
closed
Locations
Materials at High Temperatures (publishedVersion)
Funders
Bundesministerium für Wirtschaft und Technologie
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
  • Physical Sciences › Materials Science › Materials Chemistry › Nuclear Materials and Properties
Keywords
oxide scale formation, carbide formation, CO2 permeation, carburizing, high-temperature oxidation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Scale formation mechanisms of martensitic steels in high CO2/H2O-containing gases simulating oxyfuel environments. https://app.cochat.ai/papers/10.3184/096034009x438185
The paper
Pirón Abellán, J., Olszewski, T., Penkalla, H. J., Meier, G. H., Singheiser, L., & Quadakkers, W. J. (2009). Scale formation mechanisms of martensitic steels in high CO2/H2O-containing gases simulating oxyfuel environments. Materials at High Temperatures. https://doi.org/10.3184/096034009x438185

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.