Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 130

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Fabrication and characterization of polycaprolactone/chitosan nanofibers containing antibacterial agents of curcumin and ZnO nanoparticles for use as wound dressing

Mosallanezhad, Pezhman, Nazockdast, Hossein, Ahmadi, Zahed, Rostami, Amir · 2022 · Frontiers in Bioengineering and Biotechnology

Abstract

The potential of the nanoscale structure is utilized by electrospun nanofibers, which are promising materials for wound dressings. Here, we prepared wound dressings constituting polycaprolactone (PCL) and chitosan (CS). Curcumin (Cur) and zinc oxide nanoparticles (ZnO) as antibacterial agents were embedded in PCL/CS electrospun nanofibers and different properties including morphology, physicomechanical, interaction with water, antibacterial efficiency, and in vitro studies were investigated. SEM images confirmed the nanofibrous structure of samples with 100 ± 5 to 212 ± 25 nm in average diameter. Elemental analysis of nanofibers showed a good distribution of ZnO along nanofibers which not only caused decreasing in nanofiber diameter but also increased tensile strength of nanofibers up to 2.9 ± 0.5 MPa and with good elongation at break of 39 ± 2.9. ZnO nanoparticles also facilitated the interaction of nanofibers with water, and this led to the highest water vapor transition rate, which was equal to 0.28 ± 0.02 g cm−2 day−1. The sample containing 3 wt% Cur had the highest water uptake value (367 ± 15%) and the lowest water contact angle (78 ± 3.7°), although Cur has a hydrophobic nature. The release profile of Cur showed a two-stage release and the Peppas model predicted a non-fickian diffusion. Simultaneous incorporation of CS, ZnO, and Cur effectively inhibited bacterial growth. In addition, in vitro studies represented that high content of Cur decreases cell viability and cell attachment. The outcomes from the fabricated nanofibrous scaffolds demonstrated appropriate properties for application as a wound dressing.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3389/fbioe.2022.1027351

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Research works printed but not linked: 52

  1. Afshar, 2019, Preparation and characterization of electrospun poly (lactic acid)-chitosan core-shell nanofibers with a new solvent system, Int. J. Biol. Macromol., 138, 1130, 10.1016/j.ijbiomac.2019.07.053 · DOI
  2. Aidun, 2019, Graphene oxide incorporated polycaprolactone/chitosan/collagen electrospun scaffold: Enhanced osteogenic properties for bone tissue engineering, Artif. Organs, 43, E264, 10.1111/aor.13474 · DOI
  3. Al-Bishari, 2022, Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold, Front. Bioeng. Biotechnol., 10, 975431, 10.3389/fbioe.2022.975431 · DOI
  4. Alimohammadi, 2022, Controlled release of azithromycin from polycaprolactone/chitosan nanofibrous membranes, J. Drug Deliv. Sci. Technol., 71, 103246, 10.1016/j.jddst.2022.103246 · DOI
  5. Babaei, 2022, Polylactic acid/polycaprolactone bionanocomposites containing zinc oxide nanoparticles: Structure, characterization and cytotoxicity assay, J. Thermoplast. Compos. Material, 2022, 08927057221118823, 10.1177/08927057221118823 · DOI
  6. Bakhsheshi-Rad, 2021, Improved bacteriostatic and anticorrosion effects of polycaprolactone/chitosan coated magnesium via incorporation of zinc oxide, Materials, 14, 1930, 10.3390/ma14081930 · DOI
  7. Bolaina-Lorenzo, 2016, Electrospun polycaprolactone/chitosan scaffolds for nerve tissue engineering: Physicochemical characterization and schwann cell biocompatibility, Biomed. Mat., 12, 015008, 10.1088/1748-605x/12/1/015008 · DOI
  8. Chen, 2008, Intermolecular interactions in electrospun collagen–chitosan complex nanofibers, Carbohydr. Polym., 72, 410, 10.1016/j.carbpol.2007.09.018 · DOI · Paper page
  9. Chen, 2017, Covalently antibacterial alginate-chitosan hydrogel dressing integrated gelatin microspheres containing tetracycline hydrochloride for wound healing, Mater. Sci. Eng. C, 70, 287, 10.1016/j.msec.2016.08.086 · DOI · Paper page
  10. De Prá, 2017, Effect of collector design on the morphological properties of polycaprolactone electrospun fibers, Mater. Lett., 193, 154, 10.1016/j.matlet.2017.01.102 · DOI · Paper page
  11. Dwivedi, 2020, Polycaprolactone as biomaterial for bone scaffolds: Review of literature, J. Oral Biol. Craniofacial Res., 10, 381, 10.1016/j.jobcr.2019.10.003 · DOI · Paper page
  12. Fahimirad, 2021, Wound healing performance of PCL/chitosan based electrospun nanofiber electrosprayed with curcumin loaded chitosan nanoparticles, Carbohydr. Polym., 259, 117640, 10.1016/j.carbpol.2021.117640 · DOI · Paper page
  13. Ghaee, 2019, Biomimetic nanocomposite scaffolds based on surface modified PCL-nanofibers containing curcumin embedded in chitosan/gelatin for skin regeneration, Compos. Part B Eng., 177, 107339, 10.1016/j.compositesb.2019.107339 · DOI
  14. Ghazalian, 2022, Fabrication and characterization of chitosan-polycaprolactone core-shell nanofibers containing tetracycline hydrochloride, Colloids Surfaces A Physicochem. Eng. Aspects, 636, 128163, 10.1016/j.colsurfa.2021.128163 · DOI
  15. Hashemi, 2021, Preparation and evaluation of polycaprolactone/chitosan/Jaft biocompatible nanofibers as a burn wound dressing, Burns, 4179, 00362, 10.1016/j.burns.2021.12.009 · DOI
  16. Huang, 2022, Recent progress in electrospun polyacrylonitrile nanofiber-based wound dressing, Polym. (Basel)., 14, 3266, 10.3390/polym14163266 · DOI
  17. Janmohammadi, 2019, Electrospun polycaprolactone scaffolds for tissue engineering: A review, Int. J. Polym. Mater. Polym. Biomaterials, 68, 527, 10.1080/00914037.2018.1466139 · DOI
  18. Jia, 2007, Fabrication and characterization of poly (vinyl alcohol)/chitosan blend nanofibers produced by electrospinning method, Carbohydr. Polym., 67, 403, 10.1016/j.carbpol.2006.06.010 · DOI · Paper page
  19. Kakoria, 2018, A review on biopolymer-based fibers via electrospinning and solution blowing and their applications, Fibers, 6, 45, 10.3390/fib6030045 · DOI · Paper page
  20. Karakas, 2017, Nickel nanoparticles decorated on electrospun polycaprolactone/chitosan nanofibers as flexible, highly active and reusable nanocatalyst in the reduction of nitrophenols under mild conditions, Appl. Catal. B Environ., 203, 549, 10.1016/j.apcatb.2016.10.020 · DOI
  21. Karthikeyan, 2020, Biomolecule chitosan, curcumin and ZnO-based antibacterial nanomaterial, via a one-pot process, Carbohydr. Polym., 249, 116825, 10.1016/j.carbpol.2020.116825 · doi:10.1016/j.carbpol.2020.116825
  22. Keyvani, 2021, Role of incorporation of ZnO nanoparticles on corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation technique, Surfaces Interfaces, 22, 100728, 10.1016/j.surfin.2020.100728 · doi:10.1016/j.surfin.2020.100728
  23. Korniienko, 2022, Impact of electrospinning parameters and post-treatment method on antibacterial and antibiofilm activity of chitosan nanofibers, Molecules, 27, 3343, 10.3390/molecules27103343 · DOI
  24. Lao, 2008, Modeling of drug release from biodegradable polymer blends, Eur. J. Pharm. Biopharm., 70, 796, 10.1016/j.ejpb.2008.05.024 · DOI · Paper page
  25. Lou, 2008, Preparation of polyethylene oxide/chitosan fiber membranes by electrospinning and the evaluation of biocompatibility, Text. Res. J., 78, 254, 10.1177/0040517507089752 · doi:10.1177/0040517507089752
  26. Mendes, 2017, Electrospinning of food proteins and polysaccharides, Food Hydrocoll., 68, 53, 10.1016/j.foodhyd.2016.10.022 · DOI · Paper page
  27. Mirmusavi, 2022, Polycaprolactone-chitosan/multi-walled carbon nanotube: A highly strengthened electrospun nanocomposite scaffold for cartilage tissue engineering, Int. J. Biol. Macromol., 209, 1801, 10.1016/j.ijbiomac.2022.04.152 · DOI
  28. Mitra, 2022, A review on curcumin-loaded electrospun nanofibers and their application in modern medicine, JOM (1989), 74, 3392, 10.1007/s11837-022-05180-9 · DOI
  29. Nandhini, 2020, Study of polycaprolactone/curcumin loaded electrospun nanofibers on AZ91 magnesium alloy, Mater. Today Proc., 33, 2170, 10.1016/j.matpr.2020.03.327 · doi:10.1016/j.matpr.2020.03.327
  30. Ono, 2000, Photocrosslinkable chitosan as a biological adhesive, J. Biomed. Mat. Res., 49, 289, 10.1002/(sici)1097-4636(200002)49:2<289:aid-jbm18>3.0.co;2-m · doi:10.1002/(sici)1097-4636(200002)49:2<289:aid-jbm18>3.0.co;2-m
  31. Pekdemir, 2021, Thermal behavior and shape memory properties of PCL blends film with PVC and PMMA polymers, Iran. Polym. J., 30, 633, 10.1007/s13726-021-00919-8 · DOI
  32. Pillai, 2009, Electrospinning of chitin and chitosan nanofibres, Trends Biomater. Artif. Organs, 22, 179
  33. Prasad, 2021, Metal–curcumin complexes in therapeutics: An approach to enhance pharmacological effects of curcumin, Int. J. Mol. Sci., 22, 7094, 10.3390/ijms22137094 · DOI · Paper page
  34. Pulla Reddy, 1999, Interaction of curcumin with human serum albumin—A spectroscopic study, Lipids, 34, 1025, 10.1007/s11745-999-0453-x · DOI
  35. Qasim, 2018, Electrospinning of chitosan-based solutions for tissue engineering and regenerative medicine, Int. J. Mol. Sci., 19, 407, 10.3390/ijms19020407 · DOI · Paper page
  36. Radisavljevic, 2018, Cefazolin-loaded polycaprolactone fibers produced via different electrospinning methods: Characterization, drug release and antibacterial effect, Eur. J. Pharm. Sci., 124, 26, 10.1016/j.ejps.2018.08.023 · DOI
  37. Rahimi, 2017, Statistical optimization of curcumin nanosuspension through liquid anti-solvent precipitation (LASP) process in a microfluidic platform: Box-Behnken design approach, Korean J. Chem. Eng., 34, 3017, 10.1007/s11814-017-0201-3 · DOI
  38. Saatcioglu, 2021, Design and fabrication of electrospun polycaprolactone/chitosan scaffolds for ligament regeneration, Eur. Polym. J., 148, 110357, 10.1016/j.eurpolymj.2021.110357 · doi:10.1016/j.eurpolymj.2021.110357
  39. Semitela, 2020, Electrospinning of bioactive polycaprolactone-gelatin nanofibres with increased pore size for cartilage tissue engineering applications, J. Biomater. Appl., 35, 471, 10.1177/0885328220940194 · DOI
  40. Shahrousvand, 2021, Step-by-step design of poly (ε-caprolactone) /chitosan/Melilotus officinalis extract electrospun nanofibers for wound dressing applications, Int. J. Biol. Macromol., 180, 36, 10.1016/j.ijbiomac.2021.03.046 · doi:10.1016/j.ijbiomac.2021.03.046
  41. Shahrousvand, 2022, Preparation of colloidal nanoparticles PVA-PHEMA from hydrolysis of copolymers of PVAc-PHEMA as anticancer drug carriers, Nanotechnology, 33, 275603, 10.1088/1361-6528/ac6089 · DOI
  42. Shirzaei Sani, 2021, Preparation and characterization of polycaprolactone/chitosan-g-polycaprolactone/hydroxyapatite electrospun nanocomposite scaffolds for bone tissue engineering, Int. J. Biol. Macromol., 182, 1638, 10.1016/j.ijbiomac.2021.05.163 · DOI
  43. Sun, 2006, The in vivo degradation, absorption and excretion of PCL-based implant, Biomaterials, 27, 1735, 10.1016/j.biomaterials.2005.09.019 · DOI · Paper page
  44. Tajdari, 2021, Hybridization as an efficient strategy for enhancing the performance of polymer nanocomposites, Polym. Compos., 42, 6801, 10.1002/pc.26341 · DOI
  45. Van der Schueren, 2012, Polycaprolactone/chitosan blend nanofibres electrospun from an acetic acid/formic acid solvent system, Carbohydr. Polym., 88, 1221, 10.1016/j.carbpol.2012.01.085 · DOI
  46. Varshosaz, 2021, Effect of bassorin (derived from gum tragacanth) and halloysite nanotubes on physicochemical properties and the osteoconductivity of methylcellulose-based injectable hydrogels, Int. J. Biol. Macromol., 192, 869, 10.1016/j.ijbiomac.2021.10.009 · DOI
  47. Wanjun, 2005, Kinetic studies on the pyrolysis of chitin and chitosan, Polym. Degrad. Stab., 87, 389, 10.1016/j.polymdegradstab.2004.08.006 · DOI · Paper page
  48. Xu, 2009, Preparation of chitosan/PLA blend micro/nanofibers by electrospinning, Mater. Lett., 63, 658, 10.1016/j.matlet.2008.12.014 · DOI · Paper page
  49. Yin, 2020, Batch preparation of electrospun polycaprolactone/chitosan/aloe vera blended nanofiber membranes for novel wound dressing, Int. J. Biol. Macromol., 160, 352, 10.1016/j.ijbiomac.2020.05.211 · DOI
  50. Zhang, 2022, Biotechnology. Current advances and future perspectives of advanced polymer processing for bone and tissue engineering, Morphol. Control Appl., 10, 895766, 10.3389/fbioe.2022.895766 · DOI
  51. Zhu, 2020, Electrospun metformin-loaded polycaprolactone/chitosan nanofibrous membranes as promoting guided bone regeneration membranes: Preparation and characterization of fibers, drug release, and osteogenic activity in vitro, J. Biomater. Appl., 34, 1282, 10.1177/0885328220901807 · doi:10.1177/0885328220901807
  52. Zou, 2020, Electrospun chitosan/polycaprolactone nanofibers containing chlorogenic acid-loaded halloysite nanotube for active food packaging, Carbohydr. Polym., 247, 116711, 10.1016/j.carbpol.2020.116711 · DOI · Paper page

Cited by

See all 130

Metadata

Authors
Mosallanezhad, P., Nazockdast, H., Ahmadi, Z., & Rostami, A.
Venue
Frontiers in Bioengineering and Biotechnology
Published
2022-09-23
Volume
10
ISSN
2296-4185
Cited by
130
References
1

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fabrication and characterization of polycaprolactone/chitosan nanofibers containing antibacterial agents of curcumin and ZnO nanoparticles for use as wound dressing. https://app.cochat.ai/papers/10.3389/fbioe.2022.1027351
The paper
Mosallanezhad, P., Nazockdast, H., Ahmadi, Z., & Rostami, A. (2022). Fabrication and characterization of polycaprolactone/chitosan nanofibers containing antibacterial agents of curcumin and ZnO nanoparticles for use as wound dressing. Frontiers in Bioengineering and Biotechnology. https://doi.org/10.3389/fbioe.2022.1027351

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.