3D bioprinting of mineralizing cyanobacteria as novel approach for the fabrication of living building materials
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Living building materials (LBM) are gaining interest in the field of sustainable alternative construction materials to reduce the significant impact of the construction industry on global CO 2 emissions. This study investigated the process of three-dimensional bioprinting to create LBM incorporating the cyanobacterium Synechococcus sp. strain PCC 7002, which is capable of producing calcium carbonate (CaCO 3) as a biocement. Rheology and printability of biomaterial inks based on alginate-methylcellulose hydrogels containing up to 50 wt% sea sand were examined. PCC 7002 was incorporated into the bioinks and cell viability and growth was characterized by fluorescence microscopy and chlorophyll extraction after the printing process. Biomineralization was induced in liquid culture and in the bioprinted LBM and observed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and through mechanical characterization. Cell viability in the bioprinted scaffolds was confirmed over 14 days of cultivation, demonstrating that the cells were able to withstand shear stress and pressure during the extrusion process and remain viable in the immobilized state. CaCO 3 mineralization of PCC 7002 was observed in both liquid culture and bioprinted LBM. In comparison to cell-free scaffolds, LBM containing live cyanobacteria had a higher compressive strength. Therefore, bioprinted LBM containing photosynthetically active, mineralizing microorganisms could be proved to be beneficial for designing environmentally friendly construction materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 1×
“Extrusion bioprinting with bioinks, hydrogels containing living cells, is an established technique especially in the biomedical and tissue engineering field (Malda et al., 2013; Kilian et al., 2017; Valot et al., 2019; Ahlfeld et al., 2020), but there are also increasing applications in biotechnology (Krujatz et al.”
BackgroundBos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
CO2 concentrating mechanisms in cyanobacteria: Molecular components, their diversity and evolution
Badger, M. R. (2003) · Journal of Experimental Botany · doi:10.1093/jxb/erg076 · Cited by 841 · cited 1×
“CCM increase the local CO2 concentration at the carboxylation site of the enzyme ribulose-1,5-biphosphate carboxylase-oxygenase (RUBISCO) by up to a thousand-fold (Badger and Price, 2003; Price et al., 2008).”
BackgroundSedimentary Carbonate Minerals
Lippmann, F. (1973) · doi:10.1007/978-3-642-65474-9 · Cited by 545
The biology of carbonate precipitation by cyanobacteria
Merz, M. U. E. (1992) · Facies · doi:10.1007/bf02539795 · Cited by 332 · cited 15×
“KEYWORDS biomineralization, three-dimensional printing, living buildingmaterials, engineered living materials, biocement, Synechococcus sp, MICP, microbially induced carbonate precipitation 1 Introduction Using a variety of materials and a variety of structures and geometries created from 3D model data, the additive m…”
BackgroundInfluential
Cited by
Microalgae-based 3D bioprinting: recent advances, applications and perspectives
Tang, J., Sun, J., Cui, J., Yuan, X., Luan, G., & Lu, X. (2025) · Marine Drugs · doi:10.3390/md23090342 · Cited by 8
“Crucially, the printed grid architecture enhanced gas/nutrient exchange while maintaining microalgal viability, demonstrating synergistic integration of biological and structural functions [78].”
Dual carbon sequestration with photosynthetic living materials
Dranseike, D., Cui, Y., Ling, A. S., Donat, F., Bernhard, S., Bernero, M., Areeckal, A., Qin, X.-H., Oakey, J. S., Dillenburger, B., et al. (2023) · doi:10.1101/2023.12.22.572991 · Cited by 3
Rasheed, A. S., Thajuddin, F., Elumalai, A., Thajuddin, S. F., Nooruddin, T., & Dharumadurai, D. (2026) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-026-00285-3
Metadata
- Authors
- Reinhardt, O., Ihmann, S., Ahlhelm, M., & Gelinsky, M.
- Venue
- Frontiers in Bioengineering and Biotechnology
- Publisher
- Frontiers Media SA
- Published
- 2023-04-03
- Volume
- 11
- Pages
- 1145177-1145177
- ISSN
- 2296-4185 (ISSN-L)
- OpenAlex
- W4362586364
- Cited by
- 41
- References
- 5
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D bioprinting of mineralizing cyanobacteria as novel approach for the fabrication of living building materials. https://app.cochat.ai/papers/10.3389/fbioe.2023.1145177
- The paper
- Reinhardt, O., Ihmann, S., Ahlhelm, M., & Gelinsky, M. (2023). 3D bioprinting of mineralizing cyanobacteria as novel approach for the fabrication of living building materials. Frontiers in Bioengineering and Biotechnology. https://doi.org/10.3389/fbioe.2023.1145177
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.