Catalytic Fast Pyrolysis of Kraft Lignin With Conventional, Mesoporous and Nanosized ZSM-5 Zeolite for the Production of Alkyl-Phenols and Aromatics
Open accessThe DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
The valorization of lignin that derives as by product in various biomass conversion processes has become a major research and technological objective. The potential of the production of valuable mono-aromatics (BTX and others) and (alkyl)phenols by catalytic fast pyrolysis of lignin is investigated in this work by the use of ZSM-5 zeolites with different acidic and porosity characteristics. More specifically, conventional microporous ZSM-5 (Si/Al = 11.5, 25, 40), nano-sized (≤20 nm, by direct synthesis) and mesoporous (9 nm, by mild alkaline treatment) ZSM-5 zeolites were tested in the fast pyrolysis of a softwood kraft lignin at 400-600°C on a Py/GC-MS system and a fixed-bed reactor unit. The composition of lignin (FT-IR, 2D HSQC NMR) was correlated with the composition of the thermal (non-catalytic) pyrolysis oil, while the effect of pyrolysis temperature and catalyst-to-lignin (C/L) ratio, as well as of the Si/Al ratio, acidity, micro/mesoporosity and nano-size of ZSM-5, on bio-oil composition was thoroughly investigated. It was shown that the conventional microporous ZSM-5 zeolites are more selective toward mono-aromatics while the nano-sized and mesoporous ZSM-5 exhibited also high selectivity for (alkyl)phenols. However, the nano-sized ZSM-5 zeolite exhibited the lowest yield of organic bio-oil and highest production of water, coke and non-condensable gases compared to the conventional microporous and mesoporous ZSM-5 zeolites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Emeis, C. A. (1993) · Journal of Catalysis · doi:10.1006/jcat.1993.1145 · Cited by 3,084
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Review of current and future softwood kraft lignin process chemistry
Chakar, F. S., & Ragauskas, A. J. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.016 · Cited by 1,203 · cited 1×
“The most common linkages in lignin structure are ether linkages, such as the β-O-4 which predominates (40–50%) and α-O-4, as well as the 5-5, β-5, β-1, dibenzodioxocin, spirodienone and β-β linkages (Chakar and Ragauskas, 2004; Zakzeski et al., 2010; Rinaldi et al., 2016).”
BackgroundLignin depolymerisation strategies: towards valuable chemicals and fuels
Xu, C., Arancon, R. A. D., Labidi, J., & Luque, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00235k · Cited by 1,031
Stefanidis, S. D., Kalogiannis, K. G., Iliopoulou, E. F., Michailof, C. M., Pilavachi, P. A., & Lappas, A. A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.013 · Cited by 775
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Cited by
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Lignin as a potential source of high-added value compounds: A review
Zevallos Torres, L. A., Lorenci Woiciechowski, A., de Andrade Tanobe, V. O., Karp, S. G., Guimarães Lorenci, L. C., Faulds, C., & Soccol, C. R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121499 · Cited by 389
Zhang, C., Shen, X., Jin, Y., Cheng, J., Cai, C., & Wang, F. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00664 · Cited by 351
Nishu, Liu, R., Rahman, M. M., Sarker, M., Chai, M., Li, C., & Cai, J. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106301 · Cited by 319
Catalytic fast pyrolysis of lignocellulosic biomass: Critical role of zeolite catalysts
Liang, J., Shan, G., & Sun, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110707 · Cited by 267
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review
Wang, Y., Akbarzadeh, A., Chong, L., Du, J., Tahir, N., & Awasthi, M. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134181 · Cited by 247
Nishu, Li, Y., & Liu, R. (2022) · Journal of the Energy Institute · doi:10.1016/j.joei.2022.01.001 · Cited by 66
Identifying the primary reactions and products of fast pyrolysis of alkali lignin
Supriyanto, Usino, D. O., Ylitervo, P., Dou, J., Sipponen, M. H., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104917 · Cited by 54
“However, while Lazaridis et al. [17] observed an increase in yield from 400 to 500 ◦ C for the pyrolysis of kraft lignin, the yield decreased from 500 to 600 ◦ C to yield alkyl-phenols.”
BackgroundSun, H., Luo, Z., Wang, W., Li, S., & Xue, S. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114753 · Cited by 51
Production of phenolic chemicals from hydrolysis lignin via catalytic fast pyrolysis
Paysepar, H., Venkateswara Rao, K. T., Yuan, Z., Shui, H., & Xu, C. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104842 · Cited by 50
Li, S., Luo, Z., Wang, W., Sun, H., Xie, J., & Liang, X. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123853 · Cited by 49
Lignin Depolymerization to BTXs
Serrano, L., Cecilia, J. A., García-Sancho, C., & García, A. (2019) · Topics in Current Chemistry · doi:10.1007/s41061-019-0251-6 · Cited by 36
Metadata
- Authors
- Lazaridis, P. A., Fotopoulos, A. P., Karakoulia, S. A., & Triantafyllidis, K. S.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2018-07-18
- Volume
- 6
- Pages
- 295-295
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W2884294420
- Cited by
- 155
- References
- 20
- FWCI
- 5.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.